HP officejet Pro 8100 printer tray

Similar Questions

• OfficeJet Pro 8100: Officejet Pro 8100 printing problem!

  I've been using an Officejet Pro 8100 for about four 4 years or so and, recently, he stopped printing the color MAGENTA ink cartridge.  I ran to the printhead cleaning app more app of the alignment of printhead several times; but, in vain.  I also spent cartridges; also, in vain.   By local service organizations, I was told that I might as well buy a new printer as the cost for the service could be almost the same as the cost of a new printer.  If there is no solution for my problem, I've been watching the Pro OfficeJet 8210 as an alternative.  It would be a good choice?

  Hi @elbojon1

  If you are looking to buy a new printer Officejet Pro I recommend to check this link: http://www8.hp.com/us/en/ads/ink-decisionator/overview.html

  It is a decisionator tool to help choose which printer best suited to your needs.

  Depending on how you print, you might be interested in instant ink program. It is a subscription model where you pay the same monthly price and receive replacement cartridges according to your needs. It is cheaper than buying a new cartridge every time. Here is a link for more details: https://instantink.hpconnected.com/us/en/r

  Eligible countries and the printer models are described below.

  

  

• How to connect the Officejet Pro 8100 printer to wireless network

  Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?

  Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!

  I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).

  Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!

  Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!

• OfficeJet pro 8100 prints the code source visual studio in black only

  This problem occurs only for installing the 8100, previously, I received ouput on laserjet 2600n color.  I followed the troubleshooting pages, print in black only is disabled, grayscale printing is turned off.  Strangely, the same problem occurs when you print from MAC x-code.

  I think it is a setting in VS which must be enabled.  I found this forum which explains how do it, but I don't have access to VS to test.

• HP Officejet Pro 8100: printed my email but wrong size

  I just tested eprint for the first time.  He printed my email attachment (2048 x 1536 jpg photo) but printed the entire image, as if it were a picture of 5.5 x 4.25 inches in the lower left corner of the print 8.5 x 11 sheet of paper.  Strange.  Any reason why this would happen?

  Hello

  This is an expected behavior, you can find the HP ePrint specs below:

  http://support.HP.com/us-en/document/c02283481

  E-mails in paper size: letter or A4
  
  Attachments image of paper size: 101.6 x 152.4 mm (4 x 6)

  Any image as an attachment will be reduced to 4 x 6 inches (the difference likely to occur due to the perspective of the image.

  You can either get a 4 x 6 photos by attaching a file image or A4 or letter by inserting a picture of the content, the image will be relatively to the email and not a photo full page...

  HP ePrint service only provide basic features of the printer, for better control, you can print from a PC or a mobile device (using the HP ePrint app).

  Shlomi

• HP Officejet Pro 8100 printer: HP Officejet Pro 8100 x - N811a/N811d

  While in the properties, the test print out in color, when I try to print a document, it used to print in color.  I must appied in levels of gray, to black/color and still does not print in color.  What I am doing wrong?

  Hi @Vin220 and welcome to the Forums of HP!

  I see that you have problems printing output. I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Officejet Pro 8100 printer: scanning of documents on printer HP Officejet Pro 8100 - N811

  Hi, the printer works fine, but I can't seem to find how to SCAN a document with this printer.

  Any advice would be great.

  Thank you very much!

  Hello

  Have you installed software and the driver on your computer yet? If so, please double-click on the desktop printer icon and

  b select scan a Document or Photo.

  (b) put original on glass, face down,

  (c) select size, dpi, output location...

  d click Scan

  Kind regards.

• Re: HP officejet Pro 8100 will print from an Iphone, but not from my windows laptop

  My OfficeJet Pro 8100 print wireless to all laptops and tablets, but not of LENOVO Y530 my wife, under VISTA Home Premium, 64 bit OS.

  I've been on the LENOVO site and of course, it didn't help.  There seems to be little help here as well and I have been unable to determine what needs to be done or downloaded for this laptop.  Can provide you any assistance?

  Thank you

  Bob Lewis

  Hi @bugaloo and welcome to the Forums of HP!

  I see you are having problems printing from your Lenovo. I would like to help!

  Have you installed a software?

  I recommend to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Blue screen - Officejet Pro 8100

  Hello

  I already have a few blue screens (Windows 7 Home Premium 64-bit) after installing drivers of origin of DVD on my laptop. I have the Officejet Pro 8100 printer. Since my laptop crashes all the time, I had to remove drivers.

  What can I do?

  Kind regards

  Hello

  It seems that this solves the problem that is described in this post. After a few days, everything works fine.

  Thank you

• HP Officejet Pro 8100: HP Officejet 8100 N811a - network connection is not possible

  Hello community,

  I have a pretty standard network with 3 points of access, WPA - PSK authentication, TKIP/AES encryption, running on channels 1-11. I made the MAC filtering is off and DHCP is on.

  The printer connects to the network, or via the software of HP Doc or the EWS settings.

  It's however possible to connect the city nearby networks so I must be overlooking something.

  After that under the HP Doc and he's trying to set up the printer I just get an exemption from the unknown error.

  The printer prints fine when connected by cable.

  The Network Configuration after the eroor HP Doc said

  Wireless on : Pass
  Wireless Working : Pass
  
  Connected : Not Run
  
  Network Name Found : Pass
  
  Printer Settings Consistent : Not Run
  No Filtering : Not Run
  Channel : Not Run
  Security : FAIL
  
  And in the Configuration it lists the SSID but IP Adress states : not applicable
  

  Ideas?

  Hi @NK10,

  Welcome to the Forums of HP Support!

  I see that you are unable to connect wirelessly with your HP Officejet Pro 8100 printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you mentioned that you have "3 APs, authentication WPA - PSK, AES/TKIP encryption, running on channels 1-11 I made sure MAC filtering is off and DHCP is on. »

  First, I'll assume means AP access point.

  • WPA2-PSK (TKIP) WPA2-PSK (AES) and WPA2-PSK (TKIP/AES) are all different encryption options. Which one do you use?
  • Do not use more than one type of encryption at the same time, what access points help.
  • The router is connected to one channel at a time, not 1 to 11. What channel are you on?
  • DHCP should only be enabled on the router and disabled on each access point.

  Looks like the access points are configured incorrectly. They should have the same type of encryption and be on the same channel as the router. If the printer works well on the wired connection the wireless network configuration is causing a conflict.

  Tips for a successful wireless connection:

  • Using a unique network name (SSID).
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  For troubleshooting purposes, follow these steps:

  1. Disable all access points.
  2. Connect the printer to the router wirelessly.
  3. Test print.

  If the printer works fine wireless connected access points, you must reconfigure the access points correctly. HP does not support the networks with access point, additional router or switch, etc. The complexity of the configuration.

  For more information, see print wireless Center.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet Pro 8100: HP Officejet Pro 8100 - do not recognize tray 2 in the system set up (10 surface 4 pro runningwin 64 bit)

  I have a HP Officejet Pro 8100.  It is connected by the network of my 4 Surface Pro running Windows 10.  When I add the printer in the printer and window Deivce, he finds the thin printer.  In the printer properties, it shows Tray 1 and the duplex option.  However, it doesn't show a tray 2.

  I searched the forum.  I do the following:

  1. turn off the printer

  2. Remove Tray 2

  3. fed up printer

  4 tested - test page printed

  5. power off

  6 added tray 2

  7. power

  in settting printer - no tray 2 listed in the properties of the printer not-online setting tab

  suggestions?

  Hi Davidro,

  Thank you for your answer!

  For the moment, please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will help you!

• OfficeJet Pro 8100: Lost my printer drivers (after a Windows 10 update)!

  Hello

  After the recent Windows 10 updates (one installed on Christmas day), I lost my (custom installed) to the printer drivers. No big deal I thought, ONLY MIcrosoft MOST inconvienience - I'll reinstall just them. But when I open the properties of the printer Panel, I found that ALL ADVANCED TAB where I needed access to reinstall drivers is now GRAY and completely unaccessable! I not only lost my custom drivers, I also lost my second tray of the printer (installed optionally) capacity! YES, MERRY CHRISTMAS!

  Now I need help to reinstall (they gave me specific instructions for installation, so I won't bumble worse trying to install them differently (as a regular driver) without confirmation first.)
  This is a PERFECT EXAMPLE of why we should be allowed to choose for outselves when and what updates to install on OUR computer! I checked the Windows Update history and there is NOTHING there that would strike even he would have had to change printer drivers, nor I anthing that would affect them being changed (for example, allowing control HP from my PC to automatically updated drivers), but clearly something changted them.

  What I HAD... I use a printer Officejet Pro 8100 bought two years ago February next with the option second tray of the installed printer. I also use Officejet 8600 drivers in order to be able to print my graphic files properly (these drivers were recommended on this forum once I have posted having problems printing after the first installation. These drivers worked PERFECTLY in all of my PC (running Windows XP, 8.1, and 10), but now with the missing options, everytting is printing through the upper status bar (where I have a THICK paper). I don't have the ability to choose which try to print (Tray 1 or 2), and I need to change paper whenever I want to print on different paper (I always had a THICK paper on top (Tray 1) and plain paper in the lower part (tray 2) because it would not print thick paper from the tray at the bottom.

  To use the 8600 drivers, I was given specific instructions (on this forum) on install in the section "NEW DRIVER" of the ADVANCED TAB in the properties of the printer. Now that I don't have access to this tab, I need to know if there is a way to access new (my preferred method) OR another way to install (for example just install them as if I would install the printer (8600))?

  It's free enough explainatory tab FULL area is GRAYED OUT, but in case there are any doubts, I have attached is a screenshot showing what he looks like.

  I apprecate any help you could offer.

  Kind regards... Chugbug

  

  OK, now it's really WEID!

  I tried during the last 24 hours to get to the Panel in question, including the restart of Windows at least half a dozen times without success.  But now tonight after that I dug around the different tabs, once again, INCLUDING clicking on through security and permissions panels (but not to make changes) AND for posting my question here, all in the advanced Panel was suddenly accessible once more!

  I reinstalled my 8600 drivers again, then reset my printing (default) preferences (paper 2 / plain plateau), and everything is good again (kumbaya...)!

  Good thing, I took a screenshot of it (grey) or I can't believe myself!

  Happy holidays!  Chugbug

  Screenshot showing access with my 8600 drivers installed:

  

• HP officejet pro 8100 not review or color printing.

  My 8100 Officejet Pro won't recognize color when you try to print from my pictures in Windows 8.1. I've done all the checks... ok of ink, grayscale printing is turned off, blackonly is disabled, deleted the program and resarted from scratch with disc supplied. The computer brand new from Chillblast and is very fast and up-to-date. All inks are new and full.

  It will print documents, pdf, etc, but I can't 'see' colors in my pictures, all the previews and print out black and white.

  The only thing is that I don't know what, if any, changes may be required in the part "Color management" Settings Advanced... any advice... Thank you.

  I just checked the download site pilot official HP and wireddrivers.com site and noticed that the number of driver for my printer Officejet Pro 8100 has changed!

  It was OJ8100_1321.exe... It is now OJ8100_1321 - 1.exe.

  I downloaded this driver and all is well in my world printer!

  I don't know if that was my question on this forum or my contacts a Microsoft technician, (which was useless and kept asking me to do things that I refused to do what I explained that I had already tried), but in any case, someone realized there is a software problem in the pilot and fixed.

  I will now post this as resolved to help someone else who search... Regards Kevin.

• Can I print in black and white with an empty cartridge on a printer HP Officejet Pro 8100?

  Only the cyan cartridge is empty, all the other 3 cartridges are fine. I ordered the cartridge cyan online but I need to print important documents today. The power button blinks when I try to print.

  I do not understand, black and white must not use a color cartridge to print.

  Is there something so I can print before receiving the cyan cartridge?

  The printer Officejet Pro 8100 has the same print mechanism like its counterpart of all-in-One Officejet Pro 8600.  This printer has a print head mechanism that contains 4 individual cartridges: CMYK (cyan, magenta, yellow, black).

  It will replace the cartridge if the unit provides a message from one of the colors being empty, until the unit will resume printing.  This is a retention mechanism to avoid the product from damage.  I hope this helps.

• More than a printer HP OfficeJet Pro 8100

  Hello

  I need to buy two printers wireless to use with an iPad.

  But the thing is: if I install TWO identical HP OfficeJet Pro 8100 under the same wifi network, how can I know that I want to print? In other words, my concern is that when I want to print a document using the iPad it will show two printers, but both with the name "HP OfficeJet Pro 8100". Having in mind that each printer is located away from each other in my house, I need to print under the right printer.

  Is it possible to change the name that appears on AirPrint so I can distinguish the two printers? Something like "Printer-Studio" and "printer-bedroom"? Or something that works somehow...

  Thank you.

  Pedrosacelso,

  It is possible to change the name of the printer, many customers buy more than one printer to a desktop environment and need to change the printer name to identify the printer.

  If you have problems with the above steps back on the support forums.