HP Officejet Pro 8500 A909a_ Scan with HP Solution Center does not work

Similar Questions

• I have a Photosmart Premium c410 series. My hp Solution Center does not work, I can't scan.

  Operating system is Windows Vista, the error message says to reinstall the printer using the installation disc.  (I did several times).  Really need to scan, but don't know how.  States of printer to the computer.  This is not the case.  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello judieKay

  Would you please provide the full model number? For example C410a. Some models are slightly different from each other and I want to assure you to give you specific information. How can I find my model number?

  Regarding the error, I checked and the following instructions should work on all models of the C410. The following instructions are for the "cleansing" or "cleaning" your computer HP printing software. This should allow you to perform a new installation of your printer and should fix your mistakes.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• HP Officejet Pro L7780: HP Officejet Pro L7780 Solution Center does not work even though I can print

  Last week, Solution Center of my printer HP Officejet Pro L7780 stopped working, even though I can still print directly from applications. But I can't use the scan feature. I uninstalled and reinstalled the driver full several times (after uninstalling using uninstall_L4, cold restarted the printer, remove the DigitalImaging registry key and delete all the files in %Temp%). The re - install seems to be okay except that when I try to open the solution Center, it happens nothing except sound.

  Any ideas how to solve this problem?

  Thank you.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• HP Photosmart C6280 all-in-one: HP Solution Center does not work. I can print but not scan

  I can't open the HP Solution Center to scan. When I try to open it I get a notification that all software is not installed. I ran Dr. scanning HP and all software installation downloaded and ran. Every thing is installed. Tried to open it to new and same result.

  Am going to the forum and found this update of windows 3132372 could be the problem. Checked and I do not have that update to uninstall.

  Because the HP Scan and Capture app can be a solution. Who has downloaded but it refused to detect my printer.

  I really need to solve this problem. I got nothing else problems with printing and scanning as Windows 10 came.

  A ran a uninstall and reinstalled (second time). It's working now.

• HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

  I used to have it all in one connected to my pc, until I lived some printing problems, so I decided to uninstall it!  When I tried to reinstall, the pc will not connect it.  I tried different ports and have replaced the cable, have also downloaded the latest software and drivers all to nothing does not.  I can connect wireless to my laptop, but unfortunately is not a solution for my office because it is not wireless, so it must be connected via USB.  At my wit's end, please help me!

  Hello

  Can you try to insert a flash drive into one of the USB ports on the printer, to make sure she reads it?

  The printer port may be what gives you the question. In addition, you can try the USB printer connected to another PC?

  Let me know the results.

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• I don't want to start a discussion! I just want to help with a product that does not work!

  I don't want to start a discussion! I just want to help with a product that does not work!

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• Last night, I bought Adobe Pro XI and this morning the serial number does not work.

  Last night, I bought Adobe Pro XI and this morning the serial number does not work.  [deleted by Moderator]

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• OfficeJet Pro 8500 a - problem with the wireless radio

  First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

  Yesterday, I bought a brand new OfficeJet Pro 8500 has.

  Since I have found a little bit of my computer and my router I configure for wireless connection.

  All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

  By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

  All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

  Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

  Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

  I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

  I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

  I hope someone on this forum knows a solution to my problem.

  Useful information:

  Computer OS: Windows 7

  Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

  Encryption: WPA - PSK

  WLAN: 802. 11 b / g

  No filtering MAC or SSID hidden

  Other devices on the network are two mobile phones and a Motorola Xoom Tablet

  Printers, IP address: 192.168.1.81

  Firewall: WIndows (the router is disabled)

  Concerning

  Thord

  Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.

• New IPad airprint can't find the Officejet Pro 8500 A909g series with firmware DLM1FN1006BR

  The series Officejet Pro 8500 A909g with firmware DLM1FN1006BR is satisfactory airprint on the new IPad?  If not, is there any difficulty?

  No, your printer is not capable of AirPrint and can not be.  You can try other printing applications, like HP ePrint home & Biz.

• HP Officejet Pro 8500 A909a scanning install computer

  I have a HP officejet pro 8500. It is installed, and I can easily print to it from my laptop. The scanner works I can scan to a USB device and then manually the port to my computer to download on the internet. However, it the device does not have a target to scan computer.

  (1) the printer is connected via an ethernet cable.

  (2) the printer and my computer are connected for printing, but does not scan.

  (3) I tried to reinstall the drivers for the device (found here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3752... but it has not solved the problem.)

  I'm looking to bind the scannerwith my computer. I don't know how to do this. I know that it is not currently bound.

  In addition the product user guide (found here: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&os=4062&product=3752456&sw_lang... was not helpful for that matter.)

  Help!

  thenextbesthang

  This article can help get back you on track. Give the steps a shot and let me know the results:
  http://goo.GL/FZ5RF

  Good luck!