HP Officejet Pro 8500 has problem with black ink printing

Similar Questions

• HP Officejet Pro 8500 has compatible with w2k8 R2 e-all-in-one printer drivers and XP clients.

  Hello

  I am looking to buy one-

  HP Officejet Pro 8500 has e-all-in-one printer (CM755A) - for our Organization, we use Windows server 2008 R2 Standard 64-bit with XP clients and wanted to know if this printer is compatible with w2k8 R2 drivers?

  Looking forward to hear from you.

  Thank - you

  It is compatible, but what I recommend is to get a newer version of the 8500 which is 8600

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.

   

• OfficeJet Pro 8500 a - problem with the wireless radio

  First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

  Yesterday, I bought a brand new OfficeJet Pro 8500 has.

  Since I have found a little bit of my computer and my router I configure for wireless connection.

  All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

  By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

  All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

  Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

  Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

  I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

  I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

  I hope someone on this forum knows a solution to my problem.

  Useful information:

  Computer OS: Windows 7

  Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

  Encryption: WPA - PSK

  WLAN: 802. 11 b / g

  No filtering MAC or SSID hidden

  Other devices on the network are two mobile phones and a Motorola Xoom Tablet

  Printers, IP address: 192.168.1.81

  Firewall: WIndows (the router is disabled)

  Concerning

  Thord

  Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.

• HP Officejet Pro 8500 has more stalls now displaying "printing".

  Hi, in the Office I work in that we have 2 HP Officejet Pro 8500 A910 Series. It is on a network with 3 PCs running WIndows 7 and the other is connected via wifi to a PC that is also running Windows 7.

  The problem is that the printer is on a network often stalls displaying "print now" on the screen of the printer. The only way to continue to print is to turn off the computer, and then on again once, wait that he do his cleaning etc. then press print. It's normally ok for this work print, but as soon as other print jobs are added must be reset to zero and the cycle repeats endlesly all day. Until recently the other printer connected via wifi was working fine but now that is also exactly the same as described above.

  Recently, I searched the forums and have discovered that it is a common problem with this type of printer.

  I did the resets partial or total of the two printers without result.

  Bothe printers currently use the firmware version: LRP1FN1126AR, which I believe is the latest firmware.

  Please someebody can explain how to make these printers are working properly? Thank you very much

  Opening and closing the door of cartrdge seem to generate an interrupt that resets the connection and unlocks the pending print job.

  While not solving the underlying abnormality, it is much faster and esier on you and the printer.

• HP officejet pro 8500 has 910 with windows vista to abnormal termination that don't resolve

  My printer was given to me and will loop continuously: it starts and displays the progress bar, operates the head printer port.

  poster 'abnormal termination' and stops and resumes the same loop again and again. I tried both the soft reset and hard reset with no results or editing, he keeps just loop. I checked for paper jams, removed covers and clean the printer replaced the cartridges of ink and cleaned printer heads, made a complete Visual inspection, nothing helps. (I'm a computer technician).

  I am at a loss here and any help would be greatly appreciated!

  Thank you!

  Well, I received my new adapter (the correct one) and it solved the problem! Only now I have a jam to carriage of mystery that I will work on next.

  I'm going to mark it as RESOLVED, because it fixed the issue I was addressing. Yep! Make sure you have the right adapter.

• set of fax for HP Officejet Pro 8500 has more with the Mavericks BONES (10.9)

  Utility HP via a wireless network see Configuring fax correctly.

  Printer and scanner works fine.

  Under "Add a printer" in system preferences, the fax feature does not appear as an option.

  all functions has worked well with OS 10.8

  have transformed the firmware update 8/13 and reinstalled drivers 10.8 but found none for 10.9

  Any suggestions are welcome.

  Hello

  Have you tried updating your software for the Mavericks?

  If you run Apple Software Update provides with something new.

  Please try the following fix:

  http://support.Apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  Under 'Add printers and Scanners', the device should appear with 'Fax' at the end of the model name.

  I hope this might help.

• HP officejet Pro 8500 a - problem with configuring wireless from ATT Uverse to Verizon FiOS

  I had this printer all-in-one, put in place and work wireless via ATT Uverse router in one city.  just moved to another city, where Verizon FiOS.  Now when I try to put in place the wireless connection, the printer connects to the router, but my computer cannot find the printer.  He gave a 169 IP address which seems not just.  I tried to uninstall and reinstall the software of the printer on my computer, but when you browse Setup on the computer, it does not find the printer automatically or by typing me the IP address, it shows on the printer.  Don't know what I did wrong.

  It is not connected to your router (indicated by the 169.254 IP address).

  Let me know the model of your FIOS router (Rev D, E, etc.).

• HP Officejet Pro 8500 has e-all-in-one printer A910a given to nine (Fax phone part short circuit)

  My phone service was interrupted (no dial tone) and I called my phone provider about the issue.  The dealer has diagnosed the problem and was told that the problem was with my printer. He tested the wiring and found that portion of phone of the printer has been bypass, pick up the phone line and do not hang up, which eliminated my phone service.  I had to unplug the printer telephone wire and wall split decision.  I now have the phone service and I can use the other features of my printer, but I can not use the fax feature.  Please advise... MSROZZIE

  Hi msrozzie,

  Have you tried to contact Verizon to check how they suggest you connect all the devices? One of your previous posts said you would contact them. I wonder what they suggest.

• HP Officejet Pro 8500 has more: 8500 has more - will not print in color and alignment of printhead failure

  I have new ink cartridges, but it will only print in black.  Grayscale is not on.  I also cleaned the print heads several times and tried to line up, but this part came failure refers to the documentation.  What are the documents?  I would lov eto to be able to print in color again!  Any ideas?

  Hi @Adriana8,

  I see that you have problems printing in color. You have changed the cartridges and have the same results. I want to help you solve this problem.

  Please, try the following steps to see if it will help solve the problem. Ignore the titles of 2nd & 3rd documents.

  HP Officejet Pro 8500 printer - color or black ink prints do not.

  All-in-one HP Officejet Pro 8500 (A909) and Officejet Pro 8500 has e-All-in-One (A910) Printer Series - one "ink cartridge appears to be missing or corrupt" control panel displays error on the printer.

  'The following printhead appears to be missing or damaged' display for HP Officejet Pro 8500 has e-all-in-One Printer Series.

  You use genuine HP cartridges?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Good day! Thank you.

• HP Officejet Pro 8500 a: HP Officejet Pro 8500 has come looking for the paper.

  Hello and thanks for any advice.  I have a HP OfficeJet Pro 8500 started a clicking then that he was trying to pick up the paper for printing a document and then received a paper error output (bin was full).  I removed all the paper and found a small plastic piece 1/4 inches long and looks like a piece of home (he's not... looks like only). I replaced the paper and tried to print.  I opserved that the mechanism of paper collection has diminished, but the wheels do not turn. I manually pushed a piece of paper in front of the van and it printed.  The collection of paper wheel is the problem... is there an available spare part?

  Hi dwaryk,

  Thanks for joining the forums of HP's Support with your request.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer that seems to have lost perhaps a part and the mechanism of paper collection has stopped working. I'll help you as best I can.

  I checked the list of replaceable parts for this printer and who find that the mechanism of collecting paper is not a replaceable piece by customer. If the printer is broken, a replacement may be your only option.

  I suggest you contact HP support. They could have an option to replace/upgrade the printer that you could save a few dollars to the retail costs.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

• HP Officejet Pro 8500 has: WIFI connection to printer after moving from a computer in another city

  I recently moved from Nevada to California with my printer.  I can't go to the printer.  The wireless light is lite. The printer has worked with this computer I Nevada. Promp in window says "printer is unable to connect to the server.

  "You can connect to the server through a proxy server" what is a proxy server address

  Hi @Raggetty ,

  I understand that you are having problems with the printer via the wireless network. I will definitely do my best to help you.

  Since you have moved, you must install the printer on the network.

  If you haven't already done so, restore the default settings of the network printer. Go to configuration, network, restore default network.

  Then set up the printer on the network again.

  Follow this document:

  Configure the printer to a wired network or wireless for the HP Officejet Pro 8500 has e-all-in-One Printer Series.

  If you need help to set up the printer on the network, let me know.

  Good day!
  Thank you.

• Player card HP Officejet Pro 8500 has

  Hello

  I need card reader and I didn't know if my printer could be sufficient.  I have the HP Officejet Pro 8500 has e-all-in-one printer and connected it wireless (I'm also using a mac, but I CAN access Windows Xp via bootcamp).  I tried to insert a SanDisk 8 Gb Micro SDHC with a SanDisk card into the slot of the printer.  The printer can read the card very well and view/print photos of the touch screen.  However, I was curious if I would be able to transfer the files to the Micro SD card on my computer and vice versa, using the printer.  If so, can is this possible, you explain how.

  Thank you

  Dan

  Hello

  Yes, you must map the drive of your printer to your network card, and it should come as a drive on your computer. You can copy files from here (Note: some cards don't like may not move photos from computer to them).

  The following statement should work for your printer:

  http://www.Instructables.com/ID/use-your-printer-as-a-card-reader/

  or this:

  http://support.HP.com/us-en/document/c00149194

  Kind regards.

• Problems with the operation of the Second paper tray - HP Officejet Pro 8500 has more

  I just bought a second paper cartridge for my HP Officejet Pro 8500 has more. It shows up on my printer paper tray 2.  However, I can't understand how to go between the paper trays to get items to print from the individual trays.  A choice should not result when I click on PRINT?  Or if I should not be able to set up a default tray for printing on letter size, but be able to change in the other side, when I want to print an envelope?

  I will be happy to help you with this problem.

  The 2nd test is an accessory. It is not downloaded in the drivers. You will need to do the 2nd tray DEFAULT tray for stationery. Go to your settings on the printer. Choose Preferences and go to the default tray.

  The envelopes and any other type of paper in addition to the letter will be put in TRAY 1.

  Let me know how it goes.

• Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? Windows 7.

  Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? I am running Windows 7.

  Hello

  The 8500 (A910) driver is not support printing posters.

  To work around the problem, you can use another pilot who provide the required functionality:

  1. Enter the control panel > devices and printers, click Add Printer .
  2. Click on Add a local printer.
  3. In use the existing Port, select the port for your printer:
     DOT4 if your printer is connected by USB
     If standard TCP/IP network connection used.
     And then click Next.
  4. Click Windows Update in the list of printers, allow several minutes for what the list will apear again.
  5. Select HP in the column of manufacturing
  6. Select the printers HP Deskjet 6980 series column.
  7. All the steps in the wizard.

  Now, you will be able to use the print feature post using the driver 6980, by setting the option Pages per sheet and poster in the finishing tab.