HP Officejet Pro 8500: Pro 8500 has only scan full page

Hello, for some reason, my scanner is missing at the bottom 2 inches of the page when I scann sheet A4.

Hello

Thank you for using the HP Forums.

Are you using the Scan software after installing the software with FULL?

Otherwise, you can install the FULL features software?

The following resources will help you:

HP printer install wizard for Windows
http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

Once you have installed the sfotware FULL of features, start the Scan software.  Follow the settings below to scan your document.

Hope that helps!

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8600 does not scan full page legal-size

    I have seen this question several times in these forums, but solutions do not apply to me - I can not find the applications or the settings or patches do not resolve the problem. I am running Windows 8 32-bit with a HP Officejet Pro 8600. When you scan a legal size document, the entire page is not scan, even when I select a custom size. The bottom is cut roughly where a letter size page would end.

    If you respond with a solution, please be very specific, i.e. If you say "Control Panel", you mean the control panel of Windows 8 or the small touch screen of the printer itself? If you want "pull me up to the HP application", please say that the we - there are several installed on this computer, and I've tried them all.

    Thanks in advance...

    In fact, the problem was located. I is broke and finally called HP support. It turns out that, contrary to the information that I have seen elsewhere, legal size paper MUST be analysed the ADF, not the dish. You can see a white band across the plateau where the search starts. The dish is physically unable to accommodate legal communication. Once the original is loaded in the ADF, the size of the document options now include legal communication.

  • HP OfficeJet Pro 6839: How to scan multiple pages in a PDF document.

    When I try to do a scan of a long document 1 page, I have no idea where to add a page. When I scan my PC, there is a really different window. I choose crop, brighten, save to the folder without problem.  Not so on my MAC! It actually starts the scan as soon as I open the window with no choice and no place to save the document. Even when I close the window, it is not save it. WHAT IS THE PROBLEM!

    I thought that if I re - install the printer/scanner that would help but can not find the CD and don't know if it would help even when...

    Hi @ATreichel,

    From your description, it seems that you use the scan of Apple rather than analysis of the HP software. If please download and install the full software features here and be sure to select the HP scanning when you see the prompt Select which software install: HP-Officejet-Pro - 6830_v12.36.0.dmg

    During installation, you will notice is the recommended package which is preselected and additional software you need to manually select.

    When you have completed the installation, you can find the following useful document for instructions scan using different methods. Please do not forget to select PDF when you scan a document multiple pages so that you can choose to save the pages in a single file. HP printers - how to scan to a Mac (OS X).

    Please let me know if that solves the problem by marking this post as an acceptable Solution.  If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.  If you need more assistance let me know and I will gladly do whatever I can to help.

  • HP Officejet Pro: How can I scan multiple pages and save them in a single document on HP Officejet Pro 6830

    I'm trying to scan multiple pages and save them as a single document from several individual pages.  Help, please!

    Hello

    I'm linking you to a document we have on the home page of the product for this printer.  It is said that it is for Mac OS x v 10.10, but I think that it also works in Maverick.

    Scan multiple pages into one file

    Click on the + sign next to scan to a single file

    It will allow you to scan multiple photos, but on the documents.

    See if that helps.

  • HP Officejet Pro 8630: Reverse order of printing pages

    The driver for the HP Officejet Pro 8630 does not support reverse Page printing order.        Y at - it a new version of the driver in development?       Is there a workaround approved by HP?

    @dsolver,

    Welcome to the HP community

    I read your message want to order back print of your Officejet 8630 and are looking for a work-around. After combing through some messages of the forum here, I found a post from @Bob_Headrick that I would say check and try it might work for you.

    Here is the message: Re: Cant Reverse Print Order HP Officejet PRO 8630

    I hope that helps!

    If you found my post has helped to achieve a solution, click on the button accept as Solution below and thumbs up button to send me a 'thanks '.

  • How can I get my HP Officejet Pro 8600 more to scan a full legal size paper?

    How can I get my HP Officejet Pro 8600 more to scan a full legal size paper? He cut scanning letter-size, but the specifications say it will scan the legal size.

    Hello

    The analysis of parameters need to be changed to HP Scan App. launch of the HP scan application from your computer and select the option left (PDF or JPEG...) and then choose the size of legal scan on the right.

    Save and close the application.

    Now you can scan in legal.

    Note:

    You can also create your own settings for scanning HP scanning parameters.

    Good impression

    Evelyne

  • HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

    HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

    The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

    When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

    Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

    For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

    I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

    Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

    I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

  • OfficeJet Pro 8500 has more: impression of 8500 has only black and yellow

    Pretty simple problem.  The cyan and magenta colors do not print.  The cartridges are all fairly new, PLR and lines of supply to the printhead not are not tangled, etc..   I wonder if I need to replace the print head.  The machine is almost 4 years old.

    Thank you

    TP

    Hello @thomasapayne,

    I understand that when you are printing on your HP Officejet Pro 8500 has more e-All-in-One Printer Color Cyan and Magenta will not print. I would like to help you today with this problem of print quality. Thanks for the troubleshooting steps that you received before reaching out for support, including. Currently, there are a few quality printing additional troubleshooting steps that can be done to resolve this Cyan and Magenta print quality problem. However, if these measures fail to solve this problem of quality then a replacement Cyan and Magenta Printhead will likely be needed. That being said, can I please have you follow the steps below.

    To begin troubleshooting can I please have you click here. Once the support document opens, please follow the steps under four Solution. This includes step 1, step 3, step 4 and step 5 under four Solution. You may need to run the three print head cleans to unclog the printhead system. Attention do not exceed three clean because the ink is used during the process of cleaning print head. After troubleshooting is completed, please print another diagnostic quality report in order to confirm if the quality issue has been resolved.

    If the problem persists, a replacement Magenta and Cyan Printhead would be necessary.

    The print head should be is original printhead Cyan and Magenta HP 940. The part number is C4901A.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • HP Officejet Pro 8500: HP Officejet Pro 8500 ceased only printing partial page in pink only

    Printer was only print a partial page of the multi page document. Replace the printer cartridges. Has run HP Diagnostics and cleaned the print heads. Still no change. For priting only a small amount of test page in pink only. Also have cartridges removed and rehabilitated. Have restarted printer several times. Please notify.

    Hello @help411911,

    The Forums of HP is a great place to find answers to the questions/problems you may have, welcome! I see that you are facing some print quality problems when you print to your HP Officejet 8500. It is printing in pink only and partial pages. You have performed the steps in troubleshooting without success.

    1. When you performed the cleaning and printed the test page, have you seen all the colors on the page or is - this only rose as well?

    2. are you able to make a black copy?

    3. When you upgraded to Windows 10 you would update the software and drivers for the 8500 JO so?

    What does the HP print and Scan doctor find? I look forward to hear from you.

    You can say thank you easily by clicking on the ' Thumbs Up ' below!

  • HP Officejet Pro 8000 has stopped working on the upgrade to Snow Leopard (10.6)

    Since the upgrade, despite the HP and Apple claiming that the upgrade would take care of things like new drivers, my 8000 Officejet Pro has stopped working. Of course, this could be a coincidence and something else caused the problem.

    Quite simply, the printer button will Flash. The manuals indicate it means need new paper in the tray, or there is a jam. In addition, the print utility said 'in paper '. Of course, I have no jams, and there are 40 pages of paper in the one and only the plateau.

    I deleted the printer in "Print & Fax", turned it off, unplugged the USB and then added back, twice, everything to nothing doesn't. Nothing changes. Still unable to print.

    It doesn't seem to be anything I can try. This page, "Mac OS x: installation and use of the product in Mac OS X 10.6", simply going to say that I should remove the printer and add it, which of course I did. There are no other suggestions for what I could do.

    So either 10.6 broke my ability to print, or the printer is otherwise defective and must be returned under warranty. Any ideas?

    Thank you.

    Update...

    has gone through a series of emails with HP support, during which, with all due respect, I asked me to do what I had already tried. We got to the point where we were providing for the printer to be returned under warranty. Then yesterday morning, bam, the printer works again. No explanation and no idea.

    Best regards.

  • OfficeJet pro 8620: party only Officejet pro 8620 page impression

    We have the officejet pro 8620 couple. They print normally well, but we have difficulty printing a pdf with JPEG image file. all print them only the upper part of the page.

    but the file can be printed from MAC without problem.

    the file is also printed on officejet pro 8600 premium.

    windows player and firmware are updated.

    I guess the drive of printer for windows bug.

    Any clue?

    Hello

    Thank you for using the HP Forums.

    You are able to use other PDF program?

    If not, can you set it to 'Print as Image' parameters ahead and see the problem is solved?

    Thank you.

  • All-in-one Officejet Pro 8610: print only every other envelope

    The printer ignores the other each envelope.

    Any suggestions?

    Thank you

    Mark

    Hello @Markb60000,

    Welcome to the Forums of HP Support!

    I understand that your HP Officejet Pro 8610 e-all-in-one printer has problems when printing envelopes from your Windows 7 computer, as every other envelope seems to be ignored during the printing process. I would like to help you today with this problem to print the envelope. Now, the first thing I did after reviewing your post has been watching the media specifications for your specific HP Officejet. Just to let you know, the specifications of following envelopes are supported:

    • Envelope weight and loading capacity in Tray 1 of your printer are as follows:

    • The following envelope sizes are supported:

    As long as you are printing on an envelope which is in the specific size and weight restrictions for your product, you shouldn't have any problem loading up to 30 envelopes in your bin at some point.

    To confirm that your envelopes are loaded properly can I please have you click here. Once the support document opens click the drop down menu to "loading envelopes. Please check to confirm that you load the envelopes correctly in your paper tray.

    • If your envelope printing problem persists after checking that your type of envelope is justified and that they are loaded correctly, can you please specify what type of program you use on your Windows 7 computer to print envelopes of.

    Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

  • OfficeJet Pro 8600 e. problem scanning scanning and Capture App Win 8.1

    OfficeJet Pro 8600 e.  New.

    Installed on HP Envy touch 23. Running Windows 8.1.

    Wireless set in place. Fine prints.  Problem is the digitization of the HP scanning and capture the software App 8.1 Win

    With the help of scanning and Capture App I can scan pictures very well.  They come out clear.  Scanning documents in GRAY has several bands/lines in gray on the entire page vertically running.  Scanning COLOR documents are very good.

    Also, if I scan from the printer directly using the touch screen of the printer, the output of scan is fine.

    I did the Scan utility to discover any errors and it show everything.  I think it is a software error.  I'm going to uninstall the HP scanning application, and then reinstall.  So, I'll do the uninstall/reinstall and accountable.

    Also, I would like to know if there is a program of office for scanning?  I prefer to use it instead of the modern HP Scan and capture App.

    Thank you...

    Hi artrum,

    I understand that you have been scanning your Officejet 8600 problems using the program window of scanning and Capture. I will certainly do my best to help you with this!

    What you explained, I think: you're right, it seems that it is only a problem with scanning windows and the Capture program and as you could scan from the front of the printer you certainly have the HP software installed. I want to make is that you use the HP scanning software, where you must run is no longer in question.

    To access the HP scanning software and be able to access it easily from your Office I would like you to follow the steps below:

    1 go to your start screen and just start typing File Explorer. You should be able to open it then to access the files on your computer.

    2 then open Local (c) disc, followed by Program Files (x 86), followed by HP, then HP Officejet Pro 8600, followed finally by bin.

    3. in the bin folder, you should see HPScan. You will want to right click on HPScan and go to send to, and then select Desktop.

    Now, you should see HP Scan on your desktop and be able to open and browse this request.

    Hope this helps, have a nice day!

  • HP Officejet Pro 8620: One side scanning instead of both sides

    Whenever we scan with the printer using ADF, ALWAYS scan both sides of the document. We want to scan only ONE side, but we cannot find any setting switching on both sides for only one party to scan. It's very frustrating because whenever we scan, we have the right page and one white. We use Adobe Acrobat and driver scan TWAIN of the model.

    Is it possible to set up the printer we want?

    Best,

    JM

    Hi @keyser2015,

    Welcome to the HP Forums!

    I see you try to do a side scan instead of the two sides, with your HP Officejet Pro 8620 on Windows 10. And I'm happy to help you!

    Each scanning program, has their own features. I'm not familiar with the use of Adobe Acrobat, so it is possible the functionality are not available in this particular scanning program. If you need help on the use of Adobe Acrobat, I would say to contact our Support from Adobe, for assistance.

    In the meantime, I suggest try using HP Scan instead and see if the option is available on the main screen to choose scan front side. If you have trouble with the HP scanning program, please try our HP print and Scan Doctor, to see if it can automatically solve the problem for you!

    Hope this information is useful and thanks for posting!

    "Please click the Thumbs up icon below to thank me for having responded."

  • OfficeJet Pro 8615: Fax a lot of page at a time

    I used my all-in-one for faxing several times beautifully, but when I need to send a response to an offer of our agency of 33 pages, I guess it was too much to do at once, then divided into two separate Fax. The first batch was 16 pages, but stuck on page 3... error message is no longer received a link or something similar. Tried 3 times separate as this was going on in his Inbox e-mail rather than fax equipment, wasn't sure if it was on his end. In the end, to consider somewhere and pay $33 to get it sent in time and he knew very well. Argh!

    There are a limited number of pages that can be faxed at one point?

    Was it because of printing extremely detailed on these pages?

    There will be more fax regarding the sale of our home and would like to know for the future.

    Thank you very much for any assistance and light any which can bring on this issue!

    Hello @Happpy1,

    Welcome to the Forums of HP Support!

    I understand that you are having problems then to fax multiple pages on your HP Officejet Pro 8615 e-all-in-one printer to your real estate agent. I would like to work with you today with the resolution of this problem.

    According to the specs on your machine management document, found here, your machine is able to contain up to 50 sheets at the same time in the bin. Therefore, if you have important faxes which lie in the ability of 50 pages, you should have no problem loading all pages at the same time and faxes.

    Regarding the question of the communication that you guys met, Fax is old analog technology. Today, the telephone companies offer digital lines. Digital lines are OK to use, but it is much more static noise and interference on these lines which can cause faxes sending and receipt of the questions. If you are unable to fax to several numbers, except one, chances are he may have had an additional inference between your two fax machines that caused the fax failure. The only time where a fax should go to a mailbox is also, if the real estate agent is to use eFax service. eFax is email fax and is something that the Realtor would have subscribed and paid for. It allows faxes go to your email rather than a real fax machine.

    One thing we can do to avoid potential future fax communication problems, would be to change two settings on your Fax. Please follow the steps below to change the settings of two.

    • Set the fax speed:

    Because the digital telephone lines transmit packets at a pace much faster than analog telephone lines, there is a chance that your fax speed may be excessive and these facsimile information packets are lost. This packet loss would result in an incomplete fax, or failure of the fax. I'll have reduce you your speed of fax for testing purposes. If the fax speed does not resolve the problem you can activate it back up to medium.

    1. Press the power button to turn on the printer, if it is not on already.
    2. On the printer Panel, drag the screen to scroll to installationand then press the installation icon ().
    3. Press Setup Faxand then on Advanced Configuration of Fax.
    4. Touch Fax speed.
    5. Touch slow.
    6. Tap the home icon () to return to the main screen.
    • Disable the Mode of Error Correction (ECM):

    Error Correction is normally activated. If your machine detects noises static or interference on the line the fax machine to fail. I'll have you turn off this feature to force your fax to go through, even if the interference is detected.

    1. Press the power button to turn on the printer, if it is not on already.
    2. On the printer Panel, drag the screen to scroll to installationand then press the installation icon ().
    3. Press Setup Faxand then on Advanced Configuration of Fax.
    4. Select the Mode of Error Correction
    5. Press OFF
    6. Tap the home icon () to return to the main screen.

    Once these parameters have been adjusted, try it please send a fax to your real estate agent to see if the problem has been resolved.

    Please reply to this message with the result of your troubleshooting. Good luck!

Maybe you are looking for

  • Cannot enable the Web Server (SSL) site on El Cap Server

    ' tLooking for help here, trying to put in place in El Cap 10.11.3/Server 5.0.15 Web services and the no - SSL server comes just in green in the admn, but the SSL server will not activate. I have an a record for the server to an external DNS server m

  • Skype keeps disconnecting...

    I started Skype on my laptop and after check in and all of a sudden I signed. Thought I have misclicked so signed again. Same story. Sign me out. Abandoned and passed to my PC. Exactly the same thing. I have the most recent version that is not the pr

  • Dual-mode touchpad does not work on Satellite A200-1Y0

    Hello I recently bought a Satellite A200-1YO PSAE3E model. I tried to activate the mode button dual pad, however, sometimes nothing no blue lights met etc. How will I know if this model has this feature? Initially, I got the Alps driver and tried to

  • Problem connecting wireless with my Tecra A8

    Hello I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.I tried several ways to solve this problem.I updated for active connections, then I click on the Connect button after y

  • How display the waveform acquired DAQ card separately in wavefrom graphic

    I NI 9239 DAQ card and it has four channels. I need to create a user interface graphic labview in which I need to display all the forms of four wave separately. If I select all four channels of the daq assistant and connect the waveform table all fou