HP Officejet Pro 8600 all-in-o: scanning and e-mailing

Similar Questions

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• HP Officejet Pro 8600 All in one – elbows / folds document

  I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

  I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

  I have the same problem, but just behind the box!
  IT IS SHAMEFUL! The printer is practically unusable!

  Sometimes it shredded paper!

  The printer driver is also very basic, compared to Canon for example.
  On top of that, it does not save the changes to your settings,
  We have to bury in the HP software!

  Also, the printer is unable to make a copy without border.

  And last but not least the printing quality is very poor.
  my printer Canon does better printed with generic ink...

  It is also large and noisy.

  I completely regret my purchase.
  I can't even sell it now as it's deffective.

• OfficeJet Pro 8600 Plus: problem of scanning the computer

  I have a HP Officejet Pro 8600. It is configured for a wireless connection.  All the features work, i.e. copying, printing out of internet/office, Fax, with the exception of scanning.  The printer is displayed the "OS is not taken in charge for this feature.  He has never done this before.  I was always able to scan to my computer before. My OS is Windows 7, 601.64.  I tried to reinstall the HP with the provided CD, but which does not allow me to run that is.

  Any suggestions before I have throw out the window?

  Hello

  Can scan you from the HP Officejet Pro series 8610 software by clicking Scan a Document or Photo?

  If not, try after HP print and the doctor Scan by selecting the difficulty of analysis:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E013-1&h_keyword=DG-NDU

  What are the results reported?

• ANALYSIS QUESTION - OFFICEJET PRO 8600 - ALL-IN-ONE

  I HAVE A HP OFFICEJET PRO 8600 PREMIUM E ALL IN ONE-N911N PRINTER.  I have
  HAS RECENTLY HAD SOME PROBLEMS WITH THE SOFTWARE/DRIVERS DESKTOP, WHERE THE
  SOFTWARE DOES NOT OPEN ON MY DESTOP.  I CONTACTED HP TECHNICAL SUPPORT. THEY
  TOOK CONTROL OF MY DESKTOP AND MY SOFTWARE HAS DETERMINED COULD HAVE BECOME
  CORUPTED AND SO DOWNLOADED FROM THE HP WEB SITE LATER
  THE OFFICEJET 8600/DRIVERS SOFTWARE VERSION, AND THAT SEEMED TO
  SOLVE MY PROBLEMS, UNTIL I DISCOVERED WHAT I BELIEVE, IT IS A BUG OR HAS
  SERVICE CAPACITY FORGOTTEN WHEN SCANNING BY USING THE MOST RECENT SCANNING
  SOFTWARE.   THE QUESTION IS, WHEN YOU USE THE 8600 DESKTOP SOFTWARE TO ANALYZE
  A DOCUMENT: IF I SCAN A FEW PAGES USING THE DOCUMENT FEEDER, THEN,.
  BEFORE I SAVE THE FILE, I WOULD LIKE TO ADD ANOTHER PAGE SCANNED, TO THIS
  SAME FILE, BUT YOU WANT TO ADD THIS EXTRA PAGE USING THE FLAT GLASS
  (NOT THE DOCUMENT FEEDER), THE SOFTWARE NOT ME LETS NOT DO THAT. THE
  SCANNING SOFTWARE IS ALWAYS LOOKING FOR THE PAGE EXTRA (S) TO BE
  ADDED, COMING THROUGH THE DOCUMENT FEEDER (SOFTWARE ONLY)
  RECOGNIZE ADDITIONAL PAGES TO COME FROM ANOTHER SOURCE, OTHER THAN
  FROM THE SAME SOURCE YOU STARTED SCANNING WITH). I'VE ALWAYS BEEN ABLE TO
  DO THIS WITH MY OLDER VERSION OF THE DESKTOP SOFTWARE (CD VERSION ONLY)
  CAME WITH MY PRODUCT), BUT SINCE I DOWNLOADED THE LATEST VERSION, IT
  DON'T ME LETS NOT START SCANNING OF A DOCUMENT FROM A SINGLE SOURCE (DOCUMENT
  FEEDER OR FLAT) AND ADD EXTRA FROM ANOTHER SOURCE () PAGES
  CHARGER DOCUMENTS OR FLAT).  IS THERE A BUG IN THE SOFTWARE?  TO
  SUMMARIZE THE PROBLEM: WHEN YOU START A SCAN USING THE DOCUMENT FEEDER.
  WANT TO ADD ANOTHER PAGE SCANNED ON THE GLASS FLAT, THEN
  SAVE ALL PAGES SCANNED IN A FILE?  YOU CAN'T DO THAT WITH THE MOST RECENT
  SOFTWARE (DOWNLOADED FROM HP WEBSITE), BUT YOU CAN THE MAKE WITH THE
  CD VERSION OVER OLD ONES. IS THIS FEATURE MISSING FROM MOST RECENT SOFTWARE?

  OK, the new SW to use can be found here:

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Download and install this.  This will install an application on your system, called "HP Scan" extended.   This software is designed to work with any recent HP scanner that has already installed the drivers.    The software does not replace your existing HP Scan supplied with the appliance.  It is rather an alternative which offers many more features than what came with your device originally.    This software is already available with the new HP machines.

  The selection of the default source is 'Use document feeder so burdened', so you should be able to scan from the ADF or flat all in one session.

  Enjoy!

• HP Officejet Pro 8600 - do not install scanning software

  Hello

  I bought a HP Officejet Pro 8600 more and the software in the box was for Window XP or Windows 7, I am running Windows 8.1. I tried to download the drivers from the wensite of HP, but I get an error message saying: the file is corrupted, or when I click on the e button to download nothing happens.

  I am currenlty printing using a USB cable but I need to scan documents, can you please help?

  Thank you

  Helen

  Hi, give the HP printer to try the Setup Wizard. (link)

• HP Officejet Pro 8600: Upgrade to Windows 10 and does not recognize the printer scan function

  What should I do to get my scanner to work with Windows 10?

  Hello

  Re-install or update software and driver help. But what is your HP Officejet Pro 8600? HP Officejet Pro 8600 - N911, it must be* where * can be from a to z.

  Kind regards.

• OfficeJet Pro 8600: Replacement of the 950 and 951 with 950XL & 951XL cartridges

  I replaced all cartridges start-up who were 950 & 951 with 950XL and 951XL. I now have a lot of wet ink over printed pages and printing is unreadable. It is the upgrade to XL one no no?

  XL 950 and 951 cartridges should work correctly in the Officejet Pro 8600, I had no problems using it in my Officejet Pro 8600.

  Are your cartridges HP is authentic or third?  The latter often have problems, see the third part study here:

  http://www.buyerslab.com/products/samples/HP-inkjet-cartridges-vs-refilled-cartridges.PDF

• my HP Officejet Pro 8600 more is always offline and no longer print

  I use my HP Officejet Pro 8600 with wi - fi.

  He worked for 3 months, Las week that it no longer works.

  I checked the Ip address, I checked the connection... Nothing works

  It's really frustrating

  Thanks for the help

  Chiara

  Hi @Mizia , welcome to the HP Forums there!

  I saw your post on your Officejet 8600 more disconnect it from your wireless network, and I hope to help. I have some suggestions for you to try below which might help to restore the connection between the two.

  Try power cycling network devices:
  Turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).
  Plug the router back in and wait another minute, turn on the printer and the computer.

  Try the procedure described in this document:

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi

  I hope that the connection is when you have completed the steps above. If there are any problems, please let me know the details and also include with which operating system you use on your computer.

  Have a great Monday!

• OfficeJet Pro 8600 - How do I 'create and print a copy to one side of a duplex ID '?

  How do I "Create and print a copy to one side of a duplex ID" which is advertised as a feature in the commercial documentation for HP OfficeJet Pro 8600?

  I read the community forums help and documentation of the printer without result.   Any help would be appreciated.

  simple.
  1. press on copy
  2. click on settings
  3. click on 'Copy ID' and select 'on '.
  4 OK

• New HP OfficeJet Pro 8600 more - can I install and use the 2nd tray of my HP OfficeJet Pro 7700?

  I would like to install the 2nd tray of my old HP Office Jet Pro 7700 under my new of OfficeJet Pro 8600.  Can I do this?

  The 2nd of the Officejet Pro 8600 paper tray is quite different from the 2nd series printers Officejet L7700 paper tray.

  * The 2nd tray for L7700 series is compatible with: L7580, L7680, L7780, L7550, L7650, L7480, L7750, L7590 and L7555.

  Click on the link provided here to access the HP Shopping site where you can buy the tray paper 8600 2nd.  The current price is $79.99 usd.

• HP OfficeJet Pro 6960 All-in-o: scan multiple pages to a pdf file

  Hello

  I recently bought this printer/scanner and I'm very happy with it. I just have a problem with the scanning. I can't find a way to save several pages in a single file. I use the document feeder and go through all the pages, but they appear as separate files. I'd appreciate any help on how to solve this problem. Thank you very much.

  Hello
  
  Thank you for using the HP Forums.

  This resource will help you:

  HP Officejet Pro 6960 series: scan a document of 6 pages 2 sides using the ADF

  Hope that helps!

• This officejet pro 8600 is not duplex scan size of different pages, only the size of page letter

  I have a desktop hp jet pro 8600 and printer. My original printer scanned pages front and back of different sizes, the printer stopped scanning properly and I replaced with the same model. Now, this printer can not scan other than letter size paper. I can only scan two-sided letter-size pages! The reason why I bought this printer has been for its scanning capabilities. I talked to support HP they said it scans only some dimensions of the page in duplex mode. Please HP DIFFICULTY this problem and give your customers the ability to SCAN RECTO VERSO DIFFERENT SIZES of PAGE. I've been with hp for many years, printers, laptops and a computer

  Message reads

  "The document feeder only supports analysis for some sizes of paper double-sided. If your original is too long or short, use the scanner glass.

  HP I'm supposed to use glass scanner page-by-page, I bought a officejet pro for special to spend less time scanning features manually. I wonder what the reason for this restriction of page size, it worked on my previous printer.

  I solved this problem without downgrading the firmware to version CLP1CN1232AR.

  I downloaded and installed HP Web Jetadmin to do this (www. HP.com/go /webjetadmin). Then, I followed the instructions on the manual (http://h10032.www1.hp.com/ctg/Manual/c01943164.pdf) to activate this option.

  The image I used was obtained on the HP ftp site: ftp://ftp.hp.com/pub/networking/software/pfirmware

  The name of the image is: ojpro_8600_n911_g_n_1232A_09272012.ful.rfu

  Now, I can scan both sides of the legal size.

• All-in-one Officejet Pro 8620: officejet pro 8620 all-in-One scan negative

  How to scan negatives and 35mm on a HP Officejet Pro 8620?  I recently read it is possible on older versions, but can not find all the information about the printer I have.  Please answer quickly because it's something I have to do for my business.

  Hello

  Negative scanning requires a special film holder (as in This example), indeed such was offered by older models and not in the past years.

  The 8620 do not offer this kind of functionality, as well as any current inkjet all-in-one device and you can't scan negatives with your printer.

  Only proffesional scanners offer a these these days, not all in one of the devices.

  Here's the only model I have managed to find to your purchase today, there could be some more and it's worth trying a such google searh:

  Digital flat HP Scanjet 5590

• HP Officejet Pro e-all-in-8610: scan to email

  I got my printer put in place so that I could scan something to my personal e-mail but my password recently changed on my email account, so it is no longer lt me scan.  When I try it says the password is incorrect, but I can't understand how to change the password in the printer so that it can connect again.  Help please!

  Spoiler (Highlight to read)

   

   

  Hi @lmdant02,

  Thank you for joining the HP Forums!

  I understand that you can't replace your password with your HP Officejet pro 8610 e-mail scan and I am happy to help you!

  Use the built-in webserver (EWS) to set up scan to email.

  NOTE:

  During the process of setting up profile, you may be prompted for the name of the SMTP server, SMTP port number or authentication information. You can contact the electronic/Internet mail service provider or system administrator to get the information. SMTP server names and the names of ports are usually easy to find by doing a search on the Internet. For example, to use terms like 'the gmail smtp server name' or 'the yahoo smtp server name' research.

  1. In the Dock, click HP utility.

     • If the HP utility is not on the dock, follow these steps:

       1. Double-click your hard drive.

       2. On the left, select Applications.

       3. Double-click the HP folder.

       4. Double-click the HP utility.

  2. Click Scan to E-mail, and then click on Start scan to E-Mail Setup. The integrated Web server opens in a new window.

     NOTE:

     If you get a message saying "Safari cannot verify the identity of the site", click on continue.

  3. Click the scanning tab, and then click Scan to E-mail Setup.

  4. Click outgoing e-mail profile.

  5. Click new and then enter your email address.

  6. Enter a name to display the control panel of the printer to identify the profile of this email.

  7. Enter or confirm the appropriate SMTP server and SMTP port information.

  8. If you usually have to enter a user name and password to connect to your e-mail account, enter this information in the fields of electronic authentication.

  9. Click Next.

  10. If you wish, enter a PIN to restrict access to this e-mail security profile.

  Source: analysis of the Panel (computer, email, MEMORY or network folder).

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this information helps!