HP Officejet Pro 8600 all-in-One - footer of the printed Page is cut

Similar Questions

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• HP Officejet Pro 8600 All in one – elbows / folds document

  I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

  I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

  I have the same problem, but just behind the box!
  IT IS SHAMEFUL! The printer is practically unusable!

  Sometimes it shredded paper!

  The printer driver is also very basic, compared to Canon for example.
  On top of that, it does not save the changes to your settings,
  We have to bury in the HP software!

  Also, the printer is unable to make a copy without border.

  And last but not least the printing quality is very poor.
  my printer Canon does better printed with generic ink...

  It is also large and noisy.

  I completely regret my purchase.
  I can't even sell it now as it's deffective.

• ANALYSIS QUESTION - OFFICEJET PRO 8600 - ALL-IN-ONE

  I HAVE A HP OFFICEJET PRO 8600 PREMIUM E ALL IN ONE-N911N PRINTER.  I have
  HAS RECENTLY HAD SOME PROBLEMS WITH THE SOFTWARE/DRIVERS DESKTOP, WHERE THE
  SOFTWARE DOES NOT OPEN ON MY DESTOP.  I CONTACTED HP TECHNICAL SUPPORT. THEY
  TOOK CONTROL OF MY DESKTOP AND MY SOFTWARE HAS DETERMINED COULD HAVE BECOME
  CORUPTED AND SO DOWNLOADED FROM THE HP WEB SITE LATER
  THE OFFICEJET 8600/DRIVERS SOFTWARE VERSION, AND THAT SEEMED TO
  SOLVE MY PROBLEMS, UNTIL I DISCOVERED WHAT I BELIEVE, IT IS A BUG OR HAS
  SERVICE CAPACITY FORGOTTEN WHEN SCANNING BY USING THE MOST RECENT SCANNING
  SOFTWARE.   THE QUESTION IS, WHEN YOU USE THE 8600 DESKTOP SOFTWARE TO ANALYZE
  A DOCUMENT: IF I SCAN A FEW PAGES USING THE DOCUMENT FEEDER, THEN,.
  BEFORE I SAVE THE FILE, I WOULD LIKE TO ADD ANOTHER PAGE SCANNED, TO THIS
  SAME FILE, BUT YOU WANT TO ADD THIS EXTRA PAGE USING THE FLAT GLASS
  (NOT THE DOCUMENT FEEDER), THE SOFTWARE NOT ME LETS NOT DO THAT. THE
  SCANNING SOFTWARE IS ALWAYS LOOKING FOR THE PAGE EXTRA (S) TO BE
  ADDED, COMING THROUGH THE DOCUMENT FEEDER (SOFTWARE ONLY)
  RECOGNIZE ADDITIONAL PAGES TO COME FROM ANOTHER SOURCE, OTHER THAN
  FROM THE SAME SOURCE YOU STARTED SCANNING WITH). I'VE ALWAYS BEEN ABLE TO
  DO THIS WITH MY OLDER VERSION OF THE DESKTOP SOFTWARE (CD VERSION ONLY)
  CAME WITH MY PRODUCT), BUT SINCE I DOWNLOADED THE LATEST VERSION, IT
  DON'T ME LETS NOT START SCANNING OF A DOCUMENT FROM A SINGLE SOURCE (DOCUMENT
  FEEDER OR FLAT) AND ADD EXTRA FROM ANOTHER SOURCE () PAGES
  CHARGER DOCUMENTS OR FLAT).  IS THERE A BUG IN THE SOFTWARE?  TO
  SUMMARIZE THE PROBLEM: WHEN YOU START A SCAN USING THE DOCUMENT FEEDER.
  WANT TO ADD ANOTHER PAGE SCANNED ON THE GLASS FLAT, THEN
  SAVE ALL PAGES SCANNED IN A FILE?  YOU CAN'T DO THAT WITH THE MOST RECENT
  SOFTWARE (DOWNLOADED FROM HP WEBSITE), BUT YOU CAN THE MAKE WITH THE
  CD VERSION OVER OLD ONES. IS THIS FEATURE MISSING FROM MOST RECENT SOFTWARE?

  OK, the new SW to use can be found here:

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Download and install this.  This will install an application on your system, called "HP Scan" extended.   This software is designed to work with any recent HP scanner that has already installed the drivers.    The software does not replace your existing HP Scan supplied with the appliance.  It is rather an alternative which offers many more features than what came with your device originally.    This software is already available with the new HP machines.

  The selection of the default source is 'Use document feeder so burdened', so you should be able to scan from the ADF or flat all in one session.

  Enjoy!

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP OfficeJet Pro 8600 N911a, no PC Interface to the printer

  Win 7 Home Premium, 32-bit and 64-bit PCs, wireless connection to the printer OfficeJet Pro 8600 N911a.

  When clicking on the icon of the desktop printer, or to access the HP program in the start menu, MS Notepad opens the interface instead of the interface coding. It's a constant problem since the installation of the software in November 2012. The software has been installed on all three 3 PCs with the disc that came with the printer. All three 3 PCs suffer the same problem of no interface, only Noptpad with the code.

  I uninstalled the drivers and firmware (using Revo) completely and reinstalled from the HP Support download site. The problem remains.

  The interface of Scan function works perfectly in the start menu.

  Other than that, the printer works fine when access to it to print from the sites, as well as the printer works perfectly with all functions when using the control panel touchscreen printer.

  Any suggestions or help appreciated.

  Bob

  Hi Bobhist,

  I understand that you have a 8600 Officejet which is not able to open the wizard in the printer on 3 different computers. I'm sorry to hear what is happening, but I'd be happy to help you!

  I would recommend you have a look through this HP Printer Wizard opens with an error in Script or in Notepad and you should then be able to use everything as planned.

  Hope this helps, have a nice week end

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• Hello, impossible to scan to PC Windows Vista HP w1707 HP Officejet Pro 8600 all-in-one...

  ... and send a scanned to an e-mail document. Copier and fax are fully functional. Computer error does not recognize the printer. They communicate in all directions. Could I miss printer software? Thanks for any help and advice, you should be able to provide. Very much appreciated.

  I solved it. Just reverse procedure. Started with the PC to communicate with the printer and all is going well, rather than having the printer to connect to the computer.

• HP Officejet Pro 8600 All in One - power all the time?

  Is it better to keep the printer on all the time or turn in and out as needed?

  Direct from the HP customer service:

• assistants of the printer went for officejet pro 8600 all-in-one more

  until recently, my printer worked perfectly.  all of a sudden the Printer Wizard is over. I can always print from MS Word or other programs but the wizard is important and I need to fix it.

  Thank you so much! It worked perfectly

• HIP L7680 all-in-One renumbering of the printed pages 1-2-3-vs 3-2-1

  Pages are printed in the order of 3-2-1. How to print in the order of 1-2-3? I use Windows Outlook 2003 on XP, I'm trying to print address cards Contacts.

  Hello

  On the tab page paper layout, you should see something similar to this:

  

  Simply select from the front to the back.

  Kind regards.

• Office Jet Pro 8600: all-in-one Officejet Pro 8600

  Hello

  My Office Jet Pro 8600 all = 0n - one did a terible grinding noice when pulling back a page for double-sided copying. Do I nbeed something oil?

  Thank you

  Greg

  Hi @Valdavidian,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 deploys a creaking, after the attempt to copy double-sided. I'm happy to discuss this issue for you!

  "Try rolls of cleaning and the Firmware update by following the steps described in this guide, a ' paper ' or 'Pick motor stalled" Message appears and the printer is not Pick Up or animal....

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this helps and have a nice day!

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi

• Installation of the HP Officejet Pro L7780 all-in-One

  HP Officejet Pro L7780 all-in-One

  Windows 7 64 bit

  Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

  I run the program "to add a series of all-in-one Officejet Pro unit

  I chose the wireless connection

  The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

  He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

  I ran the install several times (also after restart the printer and the computer) moved always

  The connection of printers is configured properly, to the best of my knowledge.

  It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

  I have no idea what to do...

  Hi RazorkillerC,

  You can scan from the HP software successfully?

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• HP Officejet Pro L7680 All - in - One will not print black

  Original title: HP Officejet Pro L7680 All - in - One

  I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

  Hello

  This forum is for comments on the Forums for answers and you should ask at your
  questions in the Windows Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  It also helps us to help you if all the useful information.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==============================================

  In this case you should check with HP Support, their documentation online and drivers,
  and ask questions about known issues in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.