HP OfficeJet Pro 8600: Analysis of the function of the computer no longer works. Get the error "User name or password Incorrect"

Similar Questions

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open.

  Hello

  OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open. How to fix Ica?

  Operating system is windows 7 but I do not connect to the PC again

  Please Help me ASAP

  Concerning

  Check the document I linked below. Let me know if it worked or not.

  http://support.HP.com/us-en/document/c01626835

• Why my firewall only use the domain user name and password for login and enable passwords, not a different password enable as do it my switches? RADIUS config looks the same...

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Question:

  Firewalls Cisco requires that one level of password, i.e. the domain user name and password are used for logging as that to reach the global configuration mode.

  Background:

  We have several network devices Cisco, put in place who authenticate to our Windows using NPS (Windows 2008 R2) DC. Switches we have implemented the function exactly as we would wish that they need your domain user name and password to connect to the device. Then they require a separate password when you use the enable command, it is stored in Active Directory:

  Switches:

  User name:domain-username

  Password:password-field

  SWITCH >Activate

  Password:Enable-password - to-Active Directory

  SWITCH #.

  Firewalls (as they are now):

  User name:domain-username

  Password:password-field

  Firewall >enable

  Password:password-field

  FIREWALL #.

  With the firewall, however, they require your domain user name and password first and then your domain password again when you use the enable command. I want to reuse the firewall to use the level that currently switches enable password rather than the password of domain. The appearance of the current configuration as follows:

  Current configuration of the switch:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  AAA authorization exec default local radius group

  AAA - the id of the joint session

  ACCT-port of 1645 auth-port host 192.168.0.1 Server RADIUS 1646

  Server RADIUS ports source-1645-1646

  RADIUS server key 7 1234abcd

  Current configuration of the firewall:

  RADIUS protocol AAA-server DC01

  AAA-server DC01 (outside) host 192.168.0.1

  authentication AAA ssh console LOCAL DC01

  Console to enable AAA authentication LOCAL DC01

  1234abcd keys

  Any help would be great, thanks!

  You must use GANYMEDE + instead of RADIUS for this.

  Here, you can use command sets in the results section of the policy.

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in one class. How to unlock my password. Carol in English

  I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in ONE class. How to unlock my login and my password, so that I can use it for all classes. Carol in English

  "Remember Me" for the site connections automatically when you return to the Web site is done with a Cookie the site in Firefox.

  Try to clear your Cookies for this Web site.
  
  Tools > Options-> life privacy - Cookies = the button show Cookies.
  
  You must use the custom settings for history at the top of this tab to see the View the Cookies button.

  Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.

  Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
  When you are finished click Close.

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• HP Officejet Pro 8600 scans to the computer windows 7

  I am using Windows 7 on my desktop at home for the first time (since a few weeks ago). I got this HP Officejet Pro 8600 for at least a year now, and it was easy scan documents using my Windows XP.

  This morning, I scanned a document on the Windows 7 system, but tonight the icon ("HP Officejet Pro 8600") does not show the scan option. I am stunned. I need to scan more than a few documents and cannot find out how to access this feature. Help, please!

  Hi delphine and welcome to the forums of HP!

  I see you have a 8600 Officejet which seems to no longer provide the analysis option. I will certainly do my best so that he could share with you scanning capabilities

  It's really weird that you get is no longer the option scan so I suggest that you run the HP print and Scan Doctor and see if it finds problems first. If she says that everything out very well we should be able to get an icon on your desktop HP Scan so that you can just open it directly.

  To do this, click the start menu, click programs principally made, click the HP folder, click on the HP Officejet Pro 8600 folder and then right click on the HP Scan, select send to and Desktop. Then, you will see an icon on your desktop that says HP Scan and you don't have to go through the HP printer Assistant longer.

  I would like to know how it goes for you!

• OfficeJet Pro 8600: communicating with the help of consumption on HP products

  My immediate problem is that my printer does not print after installing new HP ink cartridges. It worked very well, and I had a weak color and a black ink supply, so I replaced all the.

  The biggest problem is that we cannot reach, talk, email or instant message someone connected remotely to HP.

  They have a shield until molasses made up a wall of 40 regions, departments or products, followed by a re - direct to sub contract of sale or repair companies that appear when you try to click on certain areas to help.

  It is very difficult to get real help from HP directly.  Sales and marketing and promotion.  It is senseless to have an image of high class and the name and not standing behind your product, service, information or assistance.

  It makes people go to another brand name in the future.  I have a HP4215 printer / a 4180printer of HP and an Officejet PRO 8600 wireless printer, a HP Pavilion CPU and an HP laptop.  But for the life of me, I can't reach everyone out there to tell me how to fix or troubleshoot the product.  And tryng to find a local repair for printers? Is not the case.

  So MY question is, either A) how to make a rep from HP to contact me about my problems, or B) how to get the most money for my HP products when I jump from another brand that has the customer service?

  Thank you.

  R. Adams

  Hi @Arley2u ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about this here.

  Kind regards
  George

• HP OfficeJet Pro 8600: Scan - disable the 'Save' button with MAC OS 'SIERRA '.

  Hello world

  I have an Officejet Pro 8600 installed in a Macbook pro.

  After having upgraded to Mac OS Sierra (10.12) 'Save' button in the HP scanning software is now disabled when the save screen appears. Save documents are possible using the 'Test' option in the menu "Preferences".

  It worked fine with the latest version of 'El Captain'.

  I've searched for scanning HP new version for Mac OS Sierra, but nothing.

  Someone has any idea how to solve this problem?

  TKS in advance.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• OfficeJet Pro 8600: Officejet Pro 8600 unspecified on the laptop

  After the most recent upgrade Microsoft 10 (29/09/16), my laptop won't recognize not the Officejet 8600.  No problem with the printer before that. The list of the laptop the printer as Unspecified. OfficeJet bought 18/02/12. Is there an Officejet Pro 8600 driver needed?

  Thank you

  Hello @dhzz,

  Thank you for your response.

  (1) the printer EWS must appear on the browser before moving on to the next step. Please make sure that the printer and the computer are connected to the same network. If the SAP is not displayed, it means that the printer and the computer are on different networks. Get IP address and enter in the address bar of the printer. The image below is an example for a printer EWS. Please note how the IP address is entered (marked inside the red rectangle).

  

  (2) the link I provided was a 'and' added in the end. So try the address without 'and': http://ftp.hp.com/pub/softlib/software12/COL40129/bi-108860-3/OJ8600_Basicx64_1315.exe

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet Pro 8600: Where is the HP OfficeJet Pro 8600 scanner software?

  I had to go Mac machines, and when you are here looking for the latest version of the software for this product, I'm only given the opportunity to download HP Easy Start. On the old machine, I got 3 scan from HP and other utilities. I can't find that this software scanner anywhere and therefore cannot scan on this net machine.  Can someone point me to download appropriate software please? Thank you. Here's where I was looking: http://support.hp.com/us-en/drivers/selfservice/hp-officejet-pro-8600-e-all-in-one-printer-series-n9...

  Found in the Apple App Store, now called HP Easy Scan.  Could make this more clear in terms of support!

• HP OfficeJet Pro 8600 icon opens the screen on the desktop but does not scan option

  HP Officejet Pro - N911a e-all-in-one printer
  Serial number:
  {Removed privacy}
  Product number: CM749A

  When I opened icon HP OfficeJet Pro 8600 I see no lopnger options to select scan or fax from the computer monitor screen and HP printer assistance does not open.  How can I fix it?

  My solution was to delete and reload the software.  I downloaded the software from the HP support site and installed on my hard drive.  It worked.

• OfficeJet Pro 8600 analysis stops at Midway

  With the help of a relatively new in Officejet Pro 8600 on my iMac with OSX Mavericks.

  Printer is set up wireless, printing works fine. Scanning did too, until yesterday.

  When I scan a document through HP application scanning, or Mac "scanner" that appears in the Printers window, the printer is now the noise, the status bar starts and then stops. It does not move. I left it like that for hours, just to see what happens, and when I come back the job has been cancelled.

  Wireless connection is obviously good, as I can print and even when scanning printer responds immediately. It just isn't really complete - or even apparently start - the scan.

  Any idea of what is the cause? It seems that this could be a faulty machine.

  Thank you!

  Hello vertov,.

  Welcome to the Forums of HP Support!

  I'm sorry to hear you're having this problem with your 8600 scanning. A quick way to determine if your printer is having a hardware problem, make a copy.

  If the printer can make a copy, it is not a problem with the hardware with the scanner from scanning. If a scan failure is present on the printer, try looking in the steps detailed here: A 'Scanner failure' Message is displayed on the printer control panel.

  Also it is better to have the printer connected to a wall outlet directly for power, this will help you understand why: issues when connected to an uninterruptible power supply/Strip/surge protector power.

  I'll come back and get your answer.

• HP Officejet Pro 8600 more cause the crash

  I have a HP Officejet Pro 8600 Plus, it is usb connected and connected wireless.  Sometimes when I print it (not always) causes a blue screen to appeear and the computer reboots and asks me if I want SafeMode ect.  Anyone else has this problem or knows what could be causing the problem?  I am running Windows 7 Home Premium 64 bit, with a modem cable for internet and a Linksys E1200 Wireless N network connection router enemy.

  Remove the printer from the system and uninstalling all the software.  Download and install the software features and drivers complete form here.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4323648

  Now install it and try again.