HP Officejet Pro 8600 e-All-in: print queue Hung

Similar Questions

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• HP Officejet Pro 8600 Plus: Scanner/Fax, printing of two black lines on documents

  When you use the document for scan, copy, fax feeder, etc. the document always ends with two vertical black lines in the middle of the page.  I read a few other posts similar to this and tried all the advice, and nothing seems to have worked.  So far I've tried: cleaning the machine reset, turn it off for a period of time and again, disconnect it from the power supply for five minutes and by him plugging plug (which were the advice given in other posts).  Thanks in advance!

  Hi @JHurkett.

  Welcome to the Forums of HP's Support. I understand that you found lines in the scans and faxes of the ADF. I would like to help.

  If please examine this message and try the steps that you have not already done so. HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• OfficeJet Pro 8600 +: OfficeJet Pro 8600 + very slow to print

  We recently purchased a new MacBook.  From the beginning on this MacBook, our HP 8600 printer takes long time to start an extremetly to print.  Sometimes it prints ever.  The printer is set up wireless.  Sometimes the print area will say that is having problems connecting to the printer, but not always.

  This only happens on this MaxBook.  I have an iMac and a Windows laptop, both connect to the same wireless printer.  Both of these printing devices print jobs fairly quickly.

  I downloaded the new drivers.  Uninstalled and reinstalled the printer.  Restarted the printer and wireless access point.  Disabled iPV6.

  Don't know what else to try.

  Hi @JH99,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 is slow to print on a wireless connection, with your Mac. I'm happy to help you!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know the results. Although the guide title does not match your question, I think that these steps will help.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Thank you for posting!

• HP Officejet Pro 8600 Plus do not print hardcover

  I tried the solutions posted: 1) made sure the tray 2 is not installed. (2) printed 100 white pages of plain paper. (3) modified preference hardcover and paper media.  However, I always get out of paper message when you try to print on thick paper.

  This is a new printer. Help!

  Hi hubox,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8600 more do not print card stock, and I'm happy to help with this problem!

  To get help, I'll need to know:

  • If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  • If the printer is connected, USB, Ethernet, or wireless.
  • If the printer is capable of making copies of itself.
  • If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  • The size of the stock card.
  • The weight of the cardboard.

  In the meantime, please take a look through this paper guide. ' A ' Out of paper ' or 'Choose the motor at a standstill' message and the printer not picking up or feeding of the paper in the main tray.

  I hope to hear from you and thank you for posting!

• The HP OfficeJet Pro 8600 does support e-print? I am running Win 7 Pro 64-bit

  Can you please tell me: the HP OfficeJet Pro 8600 does support e-print?  I can't find or generate or figure out how to create an e-mail address for this printer.  Thank you.

  Hello BoPeepLamb,

  8600 printer OfficeJet does support ePrint. You can access the e-mail address of printers by allowing Web Services to the main display on the printer. The icon is located on the top left corner of the screen and looks like the sheet of paper with circles behind it. Before you can enable Web Services, you must ensure that you have a valid internet connection first.

  Once you have enabled Web Services, you should have a print sheet mobile printing with a printer code and the link to http://www.eprintcenter.com where you can create an account and customize your e-mail address printers.

  If you have any other questions do not hesitate to reply to this message and I'll try to find an answer for you.

• OfficeJet Pro 8600 e-all in one; "Center of HP, print Web Solutions, etc. have not installed.

  Windows 7; Wireless network; Today, I installed my new e-all-in-one Officejet Pro 8600 wireless printer. When finished, I was able to print, I have created e-print, and the scanner works, but did not find what was once called the "Solutions Center HP" that I could click on choose scanning, check the ink supply, get 'Help' and so on.  A HP 8600 printer icon installed on the desktop, but when I clicked it, it was just a bunch of meaningless jibberish, but had no function. I went to 'Start', then HP and was able to somehow make a "Scan icon" to open.  I don't have the ability to implement "WEBPRINT", nor REGISTER MY PRODUCT and so on. In other words, the installation has not finished. I tried putting the CD back in, but no additional options were available except to reconfigure them, etc.  Thank you for your help.

  PM sent on washer

• How do you resize a copy on HP Officejet Pro 8600 e-all-in-one printer - N911a

  In other forums, they tell you how to resize a copy, but I can't find what they need on my printer. I think my printer is different and does not have the fetures that talk about these other bodies. I want to know if it is even possible to resize copies on my particular model: printer e-all-in-one HP Officejet Pro 8600 - N911a

  Hello again modell7,

  I am pleased to hear that we were able to get this problem solved for you.

  Thanks for the kind words as well.

  If this isn't a lot of difficulties, please click accept as the Solution to the bottom of my post so that others can take advantage of these troubleshooting steps.

  It has been a pleasure to work with you and please feel free to write me again at any time with any other questions or concerns you may have.

  Have a great day.

  See you soon,.

• HP Officejet Pro 8600 e-all-in-one printer - N911a user manual

  I have a HP Officejet Pro 8600 - N911a e-all-in-one printer and can't locate a manual for it.  Is there one online? Thank you...

  Hello sforcer,

  Here is the User Guide:
  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03026243-3.PDF

  You will be able to find several other manuals from the link following, if the user's guide is not specific enough.
  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults/?sp4ts.Oid=4322914

  I would like to know how it works for you.

• HP Officejet Pro 8600 e-All-in: extended image printing time

  I work in a center of art and we always print pictures from the internet and stored images to use with our classes.  We have 2 8600 photograph printers and both extremely slow.  It may take up to 3-4 minutes to print a picture.  We also have a Dell PC that has no problem printing in a reasonable amount of time for the size of the image.

  I tried affecting the project settings & directly connecting to the printer and have had no success in reducing printing time.  Someone had this problem?  My next step is going to be uninstall and start again if none of you have an alternative for me.

  Thank you

  MCM1

  Hey @MCM1,

  Welcome to the Forums of HP Support!

  I understand that your two printers of HP e-all-in-one Officejet Pro 8600 printing slow computer Mac OS X 10.8. However, they print at a normal speed of your Windows System. I would like to help you today with this slow printing problem. Because printers print well to a Windows system, I don't believe that this problem is the printer hardware or connectivity related. I think rather than the print driver or incorrect is used on the Mac OS System X 10.8. Or, there may be a conflict occurring on the Mac printing system. Therefore, I will ask you to perform some standard Mac troubleshooting for this problem. Can I please you follow the steps below.

  Step 1: Check of driver:

  To start I have to confirm that your Officejets HP using HP driver and not the generic Apple Airprint driver print.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected and not the Airprint.

  

  6. click Add to add the printer to the list.

  Once the printers have been confirmed as using the correct printer driver, please test printing an image. If the slow printing problem continues to occur, proceed to the next step.

  Step 2: Reset the printing system:

  Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under "Reset printing in OS X Lion system" that the steps are the same for Mac OS X 10.8. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do not return in your HP Officejets currently Add.

  Once the reset is complete, proceed to the next step.

  Step 3: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, follow the steps in step 1 and step 2, depending on how you originally installed printers.

  Once the uninstall is complete, please continue on.

  Step 4: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 5: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 6: Install devices:

  Please click here to download the latest package full feature software and driver for your printers. Once the download is complete, follow the prompts on the screen to install the HP Officejets. Once the installation is completed successfully, please test print to confirm that the slow printing problem has been resolved.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet pro 8600 vertical black lines printing when you use the scanner/copier of SMA

  I have an Officejet Pro 8600 Plus model N911g that I got a year out of warranty. Worked perfectly until this week when I scanned approximately 50 pages through the ADM.  During the process of digitisation of the black vertical lines began to appear on documents that are scanned or print (color or BW) through the ADM.  Scanning or printing directly from the scanner glass is not the problem.

  I checked, cleaned and cleaned all (rolls, strip scanning, scanning glass) it is possible via the information provide in these forums from other veins knows on their production lines.  No change...

  I unplugged the printer all the network and fax cables and tried scanning or copying with the power of the device, NO CHANGE.  Don't know what the next step might be other than the factory reset (don't have documentation on this process).  Additional suggestions would be appreciated.

  Bcrigler

  Hello

  Please go through this document from HP, this problem is because of the dust or some contamination on glass scalled

  http://support.HP.com/us-en/document/c02881567

  Here is a video, the printer is not JO 8600 but the mechanism is the same, then even this video will be a great help

  http://www.YouTube.com/watch?v=CGn7FJvH8sE

• OfficeJet Pro 8600 Premium: HP OfficeJet Pro 8600 Premium does not print Windows with Word 2016 10 envelopes

  After that I have upgraded to Windows 10 and Word 2016, envelope and label printing feature would no longer work on all-in-one printer, HP OfficeJet Pro 8600 Premium.  Please provide any possible solution.

  Hi @dshirley22,

  Thanks for the response back.

  I would at this point uninstall all previously installed printer software. If you need assistance, here is a document that can help - uninstalling the software of the printer (Windows).

  Once the software is uninstalled, use the HP printer installation wizard to help install the software. This tool will search and find the version of the drivers and the printer software up-to-date.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet Pro 8600 Plus: problem of print head

  Have had this printer for a couple of years without any problems.  All of a sudden getting the message: printhead appears to be missing, not detected, or incorrectly installed. Lived all the recommended diagnostic checks but still a problem. I got it working the first time but then after a few days print message pops up again. The message won't let me come back to the homescreen on the printer.  I took it by a realignment and the printer prints a test page. If the printhead has been the problem, then I thought that he would not be able to print a test page. Any suggestions?

  Thanks for your support Gemini02.  As well as through the HP recommended diagnostic tests I blush as the printhead to hot water, but still the same message. I also downloaded and reloaded the drivers, but to no avail.  The machine is 3.5 years old and so I came to the conclusion, it exceeded its use by date.  The cost of a new print head is $ 70 while the printer, HP Officejet pro 8600, is now manufactured and was replaced by the Officejet pro 8620 which sold $275 by HP.  HP said that because of the age of the printer, there is no guarantee that a new printhead will not solve the problem.  I then bit the bullet and ordered a new printer.

• HP Officejet Pro 8600 e-All-in: similar question: not able to 'change the Scan tasks '.

  I have a similar problem as "ccb531", released 23/07/2015 08:22. I am unable to "Change Scan tasks" with the HP utility software. It gives the dialog box box below I need to install "HP scanning software".

  

  I installed the driver (alone) which is available on the site of HP support for my printer (HP Officejet Pro 8600 - N911a) and my operating system OSX 10.11.1 (El Capitan).

  I also followed the procedure that has been described by the support team in the post of 'ccb531', published 23/07/2015 08:22. That is to reset the printing system,uninstall the drivers and software, (repair your disk permissions is not longer available on osx 10.11), install all updates Apple and reinstall your software and drivers. But with the same result.

  Have I missed any other driver that is not listed on the support site or is the HP Easy Start on 18 November 2015 2.1.0.66 driver not yet fully functional for El Capitan?

  Any help would be much appreciated since I can't change the scanning resolution when scanning my documents on computer from my printer document feeder if the documents are too large to be useful.

  Thank you.

  Hello

  Install the HP Easy Scan app below, then try to change the scan tasks once more:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi