HP Officejet Pro 8600 Fax (CM749a) Email problem n911a

Hello!

I use a HP Officejet 8600 aio n911a (CM749a) connected to a network via ethernet.

My fax machine is currently set to 'Fax to Network Folder', but I would like to change this to 'Fax to Email. I went to the Fax tab and clicked on the HP digital Fax Wizard to try to change the 'Fax to Network Folder' to 'Fax to Email' but I cannot find anywhere how to do this.

It only allows me to disable the HP digital fax or fax to network folder.

I don't know if this helps, but I have configured alerts to e-mail through EWS/settings/Email Alerts, which seems to work fine. If the printer can send emails.

I would be grateful for your help.

Kind regards

Osman.

Hi Osman,

The HP Officejet Pro 8600 (N911a) support only the digital repository (Scan or E-mail) to a network folder.

Only the Officejet Pro 8600 Plus / Premium models provide the specific functionality.

You can find this information in the product specifications:

Digital sending features
    Scan-to Folder; Fax Archive to Folderhttp://shopping.hp.com/en_US/home-office/-/products/Printers/HP-Officejet-Pro/CM749A?HP-Officejet-Pro-8600-e-All-in-One-Printer-N911a&jumpid=oc_r1002_usen_c-001_r0001&lang=en&cc=us

Shlomi

Tags: HP Printers

Similar Questions

  • HP OfficeJet Pro 8600 Plus - ADF scanning problem

    Hello

    I recently bought this printer and used without problem for almost 2 months. However, right now I am struggling with the ADF.

    When I put a document to scan by ADF, I have a thin, black line on re-impressions. It is on the right side of the page, starts from everything at the top and goes down all the way.

    I have even if it is a kind of alignment line (you know when we write try, or its composition, leave us space on both sides)

    This problem does not exist when I scan and print documents of old school way, aka analysis usual. Only the ADF documents'ed have this problem a little. (The thin black line on things reprinted)

    Any recommendations?

    Best regards

    Update: I did what jason_h suggested in step 1 and it worked, this can be closed:

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8600-plus-ADF-copy-scan-line-down-length-of/m-p/2942099/highlight/false#M69757

  • OfficeJet Pro 8600 Fax 'answers' in case of normal phone...

    I have my Officejet pro 8600 value fax NO response.  But when in phone... via phone calls connected to the phone in the back of the printer... and the line connected to the line port... the fax machine "will answer", which is to connect to the line and interrupt the phone call, I'm... NOT when the phone rings but after a few minutes into the call.  I have to click X on the touch screen on the printer or turn it off in order to retrieve the call.  Does it randomly but quite often to be a BIG problem.  I make sure that the printer is turned off unless I need to print.

    This sounds like a defect?

    No problem.  Hope that works according to a straight line.

  • HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

    I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

    It is said:

    "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

    I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

    HP Officejet Pro 8600 +.

    Product number CM750A
    Sequence number {content removed}
    Not under warranty

    Please notify.

    I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
    http://goo.GL/BXDFf

    It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

  • How legal sheet and officejet pro 8600 fax

    How do fax you a legal form on officejet pro 8600?

    He has not worked for me; There are no settings on the bottom of the screen after using the ADF.  However, what works, it was to set up the legal size in copy mode before faxing.  But thanks a lot for the advice anyway.

  • HP Officejet Pro 8600 Plus - Duplex printing problem

    I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

    He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

    Any suggestions?

    Thank you

    Hey there @operationorphan

    I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

    You can try to update the firmware: get the latest Firmware and updates

    If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

    I hope that helps!

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    See you soon

  • More HP Officejet Pro 8600 - Fax answering incoming calls instead of answering machine

    I set up the fax on my new HP Officejet Pro 8600 Plus & the fax at the end past all test report & yes I used the good cable for the phone (the one that came with the fax) However when someone calls, the fax picks up the call rather than the answering machine.

    Can someone tell me how to fix this please?

    If you get only fax from time to time, I suggest to turn off the auto answer on the 8600, and when you hear the fax tone, * #123 to tell the fax machine to pick up. In this way, you can leave your answering machine like that and do not miss faxes.

  • Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

    I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

    I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

    I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

    HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

    I consider that a resolution of the post!

  • HP Officejet Pro 8600 Premium: change email address on eprint

    I received a used HP Officejet Pro 8600 Premium as a gift. How can I change the email to th ePrint adreess, without knowing the old password?

    Hello

    You can click on the ePrint, and then tap Settings and select Remove Web Services.

    Then, click the icon again and reactivate the web services.

    Follow the steps in the printed sheet, create your own account of HP ePrint and add the printer by following the instructions, then you will be provided with the opportunity to select an address different personalized email for the printer.

    You can follow these step by step instructions to enable HP ePrint:

    http://support.HP.com/us-en/document/c03721293

    Shlomi

  • HP Officejet Pro 8600 Plus "unspecified printer problem.

    I've just set up my HP Officejet Pro 8600 Plus e-all-in-one.  The establishment seemed fine, but when I go to the tab "devices" to "HP" connected there a sign yellow and says that I have a problem with my printer.  When I click on the symbol of the performance, the box says that "a non specifiedproblem has been reported." Please check your printer. ' When I check the printer control panel, there is no reported problem.  The machine seems to print OK, but I want to clarify this error that appears.  Any ideas?

    Also, I've done the restart and sign-off/sign-in stuff, so we can move on to the second order troubleshooting.  Thank you.

    Welcome to the HP support community!

    This error has been reported several times here on the Forum and still no resolution of HP.

    I have the same printer and the same error is reported.  While inconvenient, feel free to ignore it!  :-)

    WyreNut

  • OfficeJet Pro 8600 Plus: officejet pro 8600 fax network

    Hello

    Thank you I have HP officejet PRo 8600 more that has fax functionality and it is connected on the LAN (192.168.100.3).

    I need another application fax FAX talk (my laptop) to send any documents to HP officejet PRo 8600 by lAN for the fax on the actual fax modem so is HP officejet PRO.

    is this possible?

    What is the right configuration to be written in application FAX TALK? This is the IP fax, FAX port, login (username / password)?
    BR
    Ahmad

    Hi @amalla,

    Under Windows, the HP drivers are not considered a TAPI modem.

    Thank you.

  • OfficeJet Pro 8600 - FAX with ATT Ringmaster Service number

    I have a phone line with two numbers, the number of the House and with a distinctive ring fax number.  Send/receive works fine and the machine goes to sleep as you wish.

    When the house number rings, the machine out of sleep.  Is this supposed to be like this?  Whenever the phone rings of House, the machine out of sleep.

    After 5 minutes it falls asleep, as it is supposed to.  I find it odd that she would detect a ring on the home phone number.

    Thank you.

    PS - HP Support had me change the fax settings even though I don't think they understood what I was explaining to them.  After that I hung on to the top of the support, the machine responded as well the house number and the fax number.  I went back to the settings that I had done, but the machine still pop sleep whenever the House telephone number sounds.

    Also, when I turn off the PC, the display on the printer stay on all night.

    Someone at - it help with this (these) issues?

    Hi LeeSoFL,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    From what I understand, when you receive an incoming call, the 8600 fate of "sleep" mode and no matter if it's just a voice call or a fax. This is perfectly normal. As long as the 8600 is not attempt to return to the call voice then everything works without any problem. For the display remaining throughout the night, you may notice that it darkens. If you are worried about remaining on, try plugging the power cable directly to a wall outlet, if it isn't already. HP printers have built in surge protector and if you have connected it to a strip bar, the printer will not get all the power it needs to function properly and cela might be the reason why the screen stays on all night after the computer is turned off. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    Please let me know if you have any questions or concerns.

    Thanks for your time.

  • My HP Officejet Pro 8600 Plus prints emails as landscape only; How to assign default A4?

    All of a sudden my printer has implemented printing of emails landscape mode; How to put in portrait as a default value for printing?

    Hi @OB1214 , welcome to the forums there.

    I understand that your emails are printing landscape. If the problem is that when printing of emails, there may be a setting in your e-mail settings to change the print settings.

    If all your programs print in landscape, check the print on your computer settings.

    Changing the parameters of printing from Mac OS X

    Changing the settings to print in Windows 7

    I hope that helps!

    If the problem persists, let me know the details and also what operating system you are using.

    Thank you

  • HP OfficeJet Pro 8600: Fax spooler

    My fax machine no longer works.

    When you try to send I egt a message "spooler running configuration" for about 10 sec and then that the transmission was abandoned.

    When I run the fax test, the report states that all tests have passed.

    I then tried to send the message from another computer using the same printer, and in this case, it works.

    What should I do to solve the problem on the first computer?

    Hi Emile_M,

    Thank you for your answer!

    Please Contact HP phone support for assistance. Because they have the ability to distance in. (after you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    Contact Microsoft is also not a bad idea.

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    I hope this helps!

  • HP Officejet Pro 8600 more than network problem

    Hi I had this printer for a long time and I recently started to use functions such as printing on my network instead of print wireless wired after having several computers in the House and the feature works very well, but every time I restart the printer (I turn off every day to save energy), the connection does not work , and the display shows something like "not applicable". If I manually connect the printer to the network, then it works. But I want the connection to be consistent, not where I have to manually reconnect to the printer to my router everytime I turn on the printer. All solutions? Online tools that provides HP really doesn't help.

    Hello @thehairdude , welcome to the forums there.

    I saw your post on your Officejet 8600 more disconnect from your network and I am writing to share my suggestion.

    See this link, which will help you to assign a static IP address, which normally stabilize the connection and prevents your printer down the network.

    Printer keeps no connection Wi - Fi

    I hope this helps you!

Maybe you are looking for

  • macOS Sierra problems with screen sharing

    Hello After update to Sierra in two of my Macs, I can´t use the screen sharing. I used to use my second computer using screen sharing, but now, whenever I connect I see the split screen but active areas for use on as sleep, restart and turn off keep

  • ThinkVantage System Update fails to install updates

    Hello everyone I use the update system (SU) in Windows 7 x 64. I tried to update the drivers with it, but after downloading all packages without problem (with SU) and try to install, I get the message that no updates have been installed (SU displays

  • Is there anyone actually followed this forum?

    I am disappointed by the lack of useful answers by apple (or anyone else). Is it only a notice of peer to peer service / anecdotal, or them are there and customers real representatives of the service in question here? Sorry to be in a bad mood, but..

  • System is giving compatibility problems when DotNet2003 is open

    I installed my version of dotnet2003 version of windows vista SP1 microsoft. When I opened the Dotnet, then it shows a message that it has compatibility problems. Pls Help. Because this operating system does not support the framework 1.1 what I have

  • Upgrade Windows of Windows 7 to Windows 10

    Since October 2015, I failed attempted to upgrade Windows 7 to Windows 10. To activate the change to the settings, I had AVG Internet security. Each attempt installation of Windows 10 it fails with and error code 8007003 for which I found no willingn