HP Officejet Pro 8600: HP Officejet Pro 8600 not printing pictures

Similar Questions

• HP OfficeJet 4652: Hp OfficeJet 4652 do not print in Windows 10

  HP OfficeJet 4652 do not print in Windows 10, made an update of the firmware, it says successful but no printing after having installed the software.
  Tried different drivers even installed on another computer same thing.

  I can print a report.

  But no testpage print (failure).

  I went back this printer and bought another a HP OfficeJet Pro 8715 now to make things clear, this printer is connected by USB and not wireless, it also would not print same symptoms, it's two thing might software takes another printer HP OfficeJet Pro X576dw which is operated wireless then I unplugged the printer and started on after reinstalling , I realized they were three updates from HP now everthing works fine Yes.

  I don't know if it was unplug the other printer or updates that work.

  All is well now.

  Thanks for your help and your quick response.

  Edward

• OfficeJet k850 do not print

  HP OFFICEJET K850 will not print.  The 'summary' button flashes as soon as I turn it on.  When I push the resume button, it feeds a blank page through and keeps blinking.  There is no other light flashing or on (except the light power button, which is as usual).  I tried to unplug and disconnect all the ends of the rope.  I changed all the ink cartridges and two of the print heads.  But the problem persists.

  Frustrated!

  Hi @sarahehayward,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet K850. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem.

  I would like to try the steps in this guide, the flashing of the lights on the printer HP Officejet Pro K850 series.

  The power light and the led Flash resume

• OfficeJet 6000: OfficeJet 6000 does not print

  Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

  Hello @Pistol_shooter, greetings!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

  I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

  I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

  Please let me know if that solves the problem. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Officejet 6310 does not print in color but Mac prints a color scan

  Officejet 6310 does not print in color but Mac prints a color scan

  Awesome!

  Thank you very much.

• HP OfficeJet 4650: HP OfficeJet 4650 does not print web pages: print from Word etc very well. Using Firefox and Windows 7

  HP OfficeJet 4650 does not print web pages: print from Word etc very well.  Using Firefox and Windows 7

  Œuvres of chrome!  Does this mean I have to give up Firefox?

  Thank you!!!

• My HP Officejet 4500 does not print Office documents or info online.

  My HP Officejet 4500 does not print Office documents or info online. goes through the process, but, not ink. Removed and reinstalled. Same thing. Don't know how to solve this problem

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP OfficeJet 4500 Series - Drivers<- select="" your="" printer and="" then="" your="" windows="">
  http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=OfficeJet%25204500&SearchType=s-002

  HP OfficeJet 4500 - support and troubleshooting<- select="" your="">
  http://WWW8.HP.com/us/en/support-search.HTML?tab=2#/qryterm=OfficeJet%25204500&SearchType=s-001

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My HP officejet 6500 will not print in colour without black. I tried to run the diagnostic, turning / of

  My HP officejet 6500 will not print in colour without black.  I tried to run diagnostics, turning on/off, changing the cartridge, mop up the cart - ink, withdrawal and the cartridges, printing a test page.  All to nothing does not.

  I continued to deepen the forum and found what was a soluntion for me.  I went to the configuration selected, then went to tools, it chose and then select printhead cleaning.  The first time that he clean the printhead, I only got six rectangles colored at the bottom of the test page printed.  My screen then asked if I wanted to get another clean process and I said YES.  Low and behold, the test print page not only the FCMA out with 6 colored rectangles but also tons of alphabets in black.  Hooray! His works again.  Hope this works for you.

• OfficeJet 4622 does not print

  Hello, you told me that the color ink was all that if and I replaced the black ink only, so it's new and complete the printer not printing/copying because there is still a little bit of color ink to print even if the settings have been changed to print in black only... is - this exact?

  Yes, the printer needs in every color and black ink to keep the printhead in health.  If the color ink is completely exhausted it must be replaced.

  HP and other printer manufacturers have technology another printer for different needs.  For ink jet printers:

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The 8040 a Officejet is an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet 8600.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Officejet 4622 is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

• HP officejet 8610: HP Officejet 8610 do not printing on HP premium photo 10 x 15 cm paper

  I tried printing on HP premium photo paper and it does not work. The message of the printer's paper. I tried with one page, 2 and 10 white sheets. The book is marked by HP's print face down. I tried to clean the rollers as shown here: http://support.hp.com/us-en/document/c04117836/

  The printer is new, it is the 4th piece of paper, that I try to print after 2 weeks in our House.

  Welcome to the community @lelouHP.

  I understand that your HP Officejet 8610 knows problems printing on photo paper. I will do my best to help out you.

  Did you try the other troubleshooting steps in the document below?

  Displays a Message "Out of paper" and the printer doesn't pick up paper for Printer series e-all-in-one HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 "

  If this isn't the case, I recommend you try all the steps in order and get back to me with the results as well as the problems or the error codes that you met.

  If you have tried all the steps in this document and you still experience the problem, then you will need to contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf

• HP officejet: Hp officejet 4630 does not print

  I try to print a document from my computer and all I'm getting are dashes or white sheets. I've only used the pronter 4 times because I got it and 2 out of 4 times are to print or copy. There is ink in both cartridges so I don't know why, it's just Govind me white pages. I tried to clean the cartridges and to align it to see if it works, but the alignment page was not printed correctly. His lack of the printer image and most of the lines on who should be present. I know because I still had the first copy, when I did the alignment. I had this for less than a year and hardly used lrinter so I don't know why this isn't the impression that it should.

  Hello!
  Welcome to the HP community @Alewis324,

  I read your post on print quality issues you are facing with your Officejet 4630 and I wanted to answer with my suggestions for troubleshooting.

  Check out the links below and try the troubleshooting steps. If the quality does not improve, contact HP to discuss alternatives to the printer.

  1. Fixing poor print quality
  2. Printer prints a blank Page or doesn't print black or color ink

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' if I'm you guide to a solution!

  Best wishes

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• HP Officejet 6700 does not print

  I have a HP Officejet 6700 connected to my desktop HP w1858.  I can't the computer to send documents to print.  The printer icon has a yellow triangle with a! Select this option.  I tried to download a driver for HP printer, but it still does not print.  Windows does not list the HP Officejet 6700 (7100 & 6500 printers are listed).  Can I use a different printer model to obtain a class driver?

  Hi @katsus98040

  Welcome to the Forums of HP's Support.    I understand that you can't print from your printer Officejet 6700.

  I assume you see the exclamation icon is in your connected HP account.  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

  If I have understood you please let me know so that we can you top and printing.

• OfficeJet 6700 does not print Adobe pdf

  I have a brand new 6700 OfficeJet fine print Word documents. It will not print a pdf from Adobe. The printer begins to cross the motion, but stops and comes out blank. I converted the same file to the word and it printed like that. All other functions work well. All solutions?

  Hello

  Do not click on properties, you should see an Advanced button at the bottom of this screen, click on it.

  Check the print as Image option in this dialog box, and then click OK, to check if that helps.

  If you use another software that Adobe Reader and that you don't see these options, make sure claridy what application used to view the PDF file.

• HP officejet 4630: HP officejet 4630 does not print

  My printer is not printing. When I try to print now come but it dose not print. I tried to print from 2 computers and same problem. Also tried turing the printer works but the problem persists.

  

  Hi @MichalP,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 4630 e-all-in-one printer with a computer Mac OS X 10.11 El Capitan and the printer will not print even though it now says "Printing". I would like to help with that.

  You mentioned that you tried a second computer and it did the same thing. The second computer is a Mac as well?

  I would start by doing a Reset of the power on the printer. Maybe the printer is in an error state.

  

  It looks like the image that you tried to load didn't download successfully so I'm not able to see what it was.

  Please let me know if the power reset helped, or if you need further assistance. If you need to return, please indicate which operating system and uses the second computer.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!