HP Officejet Pro 8600 more - problems of duplex scanning

Similar Questions

• HP Officejet Pro 8600 more: problem with HP Officejet Pro 8600 more light

  As soon as I turn on my printer after some time one get a short flash printerscreen code: B84D7A4. Subsequently, I get the massage that I have to powerdown the printen and turning the power on again. This repeat hisself without end. If I disconnect the network cable from the printer starts normal. As soon as I connect the network cable, I get the same error code.

  If I connect to another network port, I have the same problem.

  Who knows the solution for this.

  I can still print via USB cable in. But I don't get the option to the printerscreen: SW update.

  Greetings @HPofficejetPro,

  I saw your post about the problems you are having and I can find some things that you can try.

  Have you tried another ethernet cable?

  The same thing happens when you connect with a USB cable?

  HP regularly publishes updates of firmware that can also correct the problem you are experiencing. With the USB cable is connected, you can click on this link to download the firmware update for the. HP Officejet Pro 8600 more e-All-in-One Printer - N911g.

  Is the printer connected directly to a wall outlet or a surge protector or a power bar? We want to connect it to a wall outlet so that we can eliminate the source of energy as the primary cause. See this document for more information on the problems when connected to an uninterruptible power supply/Strip/surge protector power (Note: this document is not limited to printers Laserjet.)

  Please let me know the results, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• HP Officejet Pro 8600 more print but not scan

  I have an Officejet Pro 8600 and I use Windows 7 Ultimate (64 bit) and it print and copy but will not scan. I had a hell of a time trying to get this thing to scan - I even spent an hour and a half with HP technical support and they could not fix it and finally gave up and call me Micro$ oft said that it must be a windows problem (Windows is up to date, incidentally).

  I tried to open the scanner software and nothing happens when I click the icon - the loading icon flashes for a second, then only the mouse pointer. Nothing happens if I try to boot from all programs. Nothing happens if I try to scan to the computer of the other printer told me the failure of sweeping and that there could be reasons of severalpossible (unrelated, software used, etc.).

  I have installed and uninstalled. A couple of times he was having trouble with the installation, but finally got it connected. Once it would not uninstall in Control Panel until I did it directly from the HP folder. I connected it by USB and wireless. I installed the version of bloatware. I cleaned that out and I tried the only version of drivers. The HP support person had me go and removed a bunch of stuff in the registry. I tried to run as an administrator. Nothing works. I even tried to scan using Windows Fax and scan. I disabled Kaspersky and made sure that my firewall is turned off.

  I am at my wits end with this and certainly regret my purchase at the moment. Help!

  Hello, it happens to the analysis of Windows (WIA) and generates an error:

  "The Windows Imaging service does not work... If the problem persists, you will not be able to scan using the applications that use this service, such as Microsoft Paint. Scanning software HP could still work. »

  It asked me to restart, and then re-run the diagnostic tests, but I got the same result.

  Then, I jumped to HP Scanner Twain and got another error:

  "The Twain component is not working properly because the product is used by another process. Save your work and close all applications. Turn the product off, turn it on again, and then click on restart and repeat the test. »

  He told me then the problem persists to uninstall the software, then reinstall the Full Feature software (I did, but available).

  * EDIT

  Problem solved!  After you had me run the diagnostic tool I googled the WIA problem and found that many other people had the same problem. A person has a response from Micro$ oft saying that it was a Windows 7 issue and how to fix it - this is the text I found:

  To start the WIA service, you need start all services of dependence. To start the dependency services, please follow the steps mentioned below:

  -> > click on start-> type "services.msc" and press ENTER, once you get up the services window, please do the rest steps.

  -> > first check and write down all the dependency services: -

  -> > right WIA-> properties-> tab dependence, check the services of name listed there.

  It must contain the following services:

  * RPC remote Procedure Call

  -> > DCOM Server process Launcher

  -> > RPC end point mapper

  * Detection material core

  Make sure that all of the above services are started in the services list.

  Last time, we started the Detection hardware Kernel, which solves our problem.

  (Andy, it's important.  Choose "Detection hardware Kernel ' and start this service which should start your 'Windows Imaging Acquisition '.  If it does not then select WIA and change the departure to "automatic".  This fixed my problems) after all dependency services start, please try to start, WIA service to solve the problem of .                                                                                                                                                                                       

  (For those who are doubtful with computers, like me, when you click on the start icon, you can type services.msc in the box of research programs or click on run and type it in there). Once inside the list of services, you can look at the dependencies by right-clicking on the Windows Image acquisition service and selecting Properties. Take note of these dependencies. Then back to the main list and watch to see if these dependencies are started. My Shell Hardware Detection says disabled, so I right click on it; However, starting selection is grayed out and I couldn't select it from the drop-down list box, so Startup type I selected Automatic, apply, close the Services window and then started my Scan software and presto, it worked.

  Thanks for setting me on the right track!

  
  

• HP officejet pro 8600 more and how to scan in word?

  How to scan into a word with a HP officejet pro 8600 document more? Why is there no selection for microsoft word given to Adobe PDF? How something to analyze in Microsoft word 2007?

  There is no way to scan directly to Word.  Simply not possible on this printer.  Not sure if this is possible on any printer to scan directly to Word.  What you can do, and it of a bit tedious, scan the document into a .pdf file, save the PDF, open the PDF, select all the items in the document, copy it to the Clipboard (Ctrl + C or right click and select copy), open Word, create a new document and paste the Clipboard into the Word document (Ctrl + V or right click and select Paste).  It is the only way to get the scans in word without conveting them form a .pdf, .doc or .docx.  I'm sorry.

• "Scan To E-mail" configuration on HP Officejet Pro 8600 more N911g

  It's the same problem reported by several other users of this forum to which no solution has been provided.
  
  I was not successful to set up the scan e-mail option for a HP Officejet Pro 8600 more N911g bought 12 August 2012 and using CLP1CN1150CR firmware.
  
  I'm trying to do through the interface of the Web server built into the printer from an iMac running Mac OS X 10.6.8 and the 5.8.0 HP utility.  More specifically the page under 'outgoing Scan-> Scan to E-mail-> e-mail profiles.
  
  I tried 2 SMTP from different servers, each one works well to send the email from the computer: Apple iCloud mail service (formerly Mobile Me, formerly known as.) Mac) and AT & T Net messaging service.  I checked the server name, port number, and authentication login and password were all correct.
  
  When scanning to email serves as the printer, I get an error message: unable to connect to the server.  Check the address and the name of the server.
  
  During a test of the computer when configuring a profile of outgoing mail, I get an error message: the device was unable to send the test e-mail message. (EmailAccounts-timeout).
  
  When I try to configure the page under "Settings-> E-mail Alerts-> mail server" and use exactly the same values as those in the e-mail profile out above, registration and Test option fails with an error message: the device was unable to send the test e-mail message.
  
  Oddly enough, I am able to use the client to the computer with the option scan to the computer-> e-mail in PDF format or by e-mail in JPEG format.  With this option, the file is scanned and added as an attachment to an e-mail message from the Mail in Mac OS X client.  The e-mail message is sent via SMTP server even when I press the button send.
  
  All the error messages seem to indicate that the client software of electronic mail of the printer is unable to establish a connection to the SMTP server.  However, it is unclear what configuration setting is one that could be the cause of the problem.

  After further research, I noticed that there is another default possible values of port Simple Mail Transfer Protocol (SMTP):

  • Port 25 is the standard SMTP port number.
  • Port 465 is the number of SMTP over SSL, Secure SMTP (SSMTP) port.
  • Port 587 corresponds to the port number dedicated for a presentation Mail (MSA) Agent that uses a variant of SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the filing of mail service.

• do I have to buy color ink cartridges? HP Officejet Pro 8600 more Windows XP

  HP Officejet Pro 8600 more

  Windows XP

  The printer will not print anything (including black and white which is my default setting), at least that I have installed a new yellow ink cartridge.  He says that the cartridge is exhausted and must be replaced before printing.    I have black and white printing color cartridges? Is there a solution? Thank you very much.

  DavidDavid salvation,

  Yes, you will need to replace the yellow cartridge to continue printing. Here's a good explanation of the design of the print mechanism, and what is needed to keep them in good working condition. Your printer is user replaceable print head. With this printer's ink lines that need to be filled in ink in this way that the print head should not be clogged jets in turn cause poor print quality problems.

  Written by Bob_Headrick on the wire note: http://h30434.www3.hp.com/t5/Other-Printing-Questions/Officejet-8500-won-t-print-Black-ink-only-if-other-colors-are/m-p/1706581#M67899

  HP, as other printer manufacturers, offers you with permanent print heads printers requiring ink for all colors, avoid the print heads.  HP, like some other manufacturers, also offers printers with user replaceable print heads.  These may of may not require ink in all colors in print, even though damage may occur if the print from the cartridge empty.  Finally, HP as some other manufacturers also offers printers with the printhead into the ink supply.  He is replaced at each change of cartridge.  These printers will happily print with a diet low, empty or many deleted completely same models.

  When you buy your next printer (from HP or from another manufacturer) be sure that you understand what is the type of printer and choose one that fits your needs.

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• OFFICEJET PRO 8600 Plus: OFFICEJET pro 8600 more

  I have been using my OFFICEJET pro 8600 more for a few years with no problems until now. It is connected wireless to my network and it is unusual. I can print a single item and then it loses the connection. I have to turn the printer off and power turn it back on, then I can print another point and it disconnects again...

  very frustrating that someone knows how to fix this?

  I use Apple and PC. Same question with all devices and computers.

  Thank you

  Greg

  Hello! Welcome to the HP community @WilSwann,

  I have seen your post on how your printer is disconnect your wireless network and wanted to answer with my suggestions.

  Check out this link and try all the steps that are listed here. Normally, they help with this type of concern and hope that they will help fix yours too!

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  If there are any problems, please let me know
  
  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• HP Officejet Pro 8600 more paper tray will not go

  [In the case of a post to repeat it is because I could not tell for sure one was actually published.]

  Product name: HP Officejet Pro 8600 more. OS is Windows 7

  First of all, I saw many possible solutions in Google search, and many of them related to the HP printers support blogs and none of them have worked for me.

  Like so many others, the problem started with my change drawer to manage envilopes. Many worked, but now the drawer don't go all the way - it stops at 9/16 inch short to be completely closed.

  I adjusted and readjusted the tray for legal size.

  I shook the left and right drawer closing.

  I removed all the paper and two sizing medium frame settings.

  I checked the track inside and the slider on the status bar and see no obstacles.

  I raised and lowered the ramp at the end; It lowers at the beginning of the slide.

  By pulling the drawer I found a slight resistance during his visit to the position of 1 inch.

  I slipped the paper-stop in and out and it positioned perfectly.

  I cycle powered by the printer.

  I can't help but think there must be simple somethinbg behind it all. Maybe a bit of lubricant in the mechanism?

  Help, please.

  I was right - something simple. Me. It seemed that the ferry was going all the way because of the gap between the drawer and the housing. I thought it was a problem because I have sent to the printer of things would not print. I still don't know why, but it seemed to be a problem with the mechanical - 'print' in applications is dimmed. But now everything seems to be in order. My apologies to those who have spent the time thinking about my 'problem'...

• My OfficeJet Pro 8600 more returns "not recognized computer" when I scan from desktop computers.

  My 8600 OJPro more has been configured to recognize my Dell computer.  What settings should I on my computer for the printer OfficeJet Pro 8600 more allow scanning from my Dell desktop?

  I would try to run printing HP and doctor Scan first to see if the problem can be solved with this automated tool.  Click here to access the tool.

  Thus, there are measures to check the WIA service:

  (1) type services.msc in the section run or search programs and files

  (2) scroll the WIA: Acquisition of Image Windows service

  (3) to ensure that this service is running.  Click on stop, and then restart to ensure that the service is running properly

  (4) restart the PC to see if WIA will resume functionality

  (5) check the properties (right click on WIA) 2 dependencies are defined

  (6) check to make sure that the remote procedure call (RPC) is running

  (7) check the detection equipment core and make sure that this forum works

  Let me know how it goes.

• HP OfficeJet Pro 8600 more: right margins are ignored

  HP OfficeJet Pro 8600 more

  Windows 7 Pro 64-bit

  The new installation of Win 7 + SP1 + all available updates (this occurs on both this system and on a network XP system)

  The right margins are ignored on all documents sent to the printer.

  Have reinstalled the printer printer twice, without success.

  Printer paper options are set to 'Custom' quality (whatever that means) and plain paper (letter size).

  It doesn't seem to be an option for shrink-to-fit in Outlook 2010, so I bet the problem is a driver conflict. Try using a different driver for the printer. I'll link the instructions below. Let me know what happens.

  How to assign other drivers to print in different Versions of Windows