HP Officejet Pro 8600 more than network problem

Similar Questions

• OfficeJet Pro 8600, more than 8600: Airprint loses connection

  After turning on the printer, I can use airprint on Mac or iPad for 1 minute about. Then the connection is lost.

  Printer is NOT in the list of Apple airprint more.

  HP working on a solution, or I change something?

  Hey @phterhorst, welcome to the Forums of HP!

  I'd love to help you with your JO 8600. I understand your description that you are only able to print using the AirPrint feature for about a minute then the printer is no longer available. It seems to me like a problem with the network connection between the router and the printer. Please first take a look at the document following and well it works sometimes and you can't see a message as mentioned here, the steps can help: what to do if you see a "No AirPrint Printers Found" message on my Apple device? What happens if I experience problems when I try to use AirPrint?

  If the problem persists, in order to isolate the root cause of the problem is the router or not, I recommend allowing the direct wireless and put your devices on the network printer. This isn't my proposed solution, just a test to see if the devices maintain a connection when we eliminate the router. Here is some information on Direct wireless and how to connect with this method.

  Let me know how it goes. If the original document of AirPrint helps you solve the problem, please be sure to mark your post as solved by clicking on the accept button Solution below.

  See you soon!

• HP Officejet Pro 8600 more: problem with HP Officejet Pro 8600 more light

  As soon as I turn on my printer after some time one get a short flash printerscreen code: B84D7A4. Subsequently, I get the massage that I have to powerdown the printen and turning the power on again. This repeat hisself without end. If I disconnect the network cable from the printer starts normal. As soon as I connect the network cable, I get the same error code.

  If I connect to another network port, I have the same problem.

  Who knows the solution for this.

  I can still print via USB cable in. But I don't get the option to the printerscreen: SW update.

  Greetings @HPofficejetPro,

  I saw your post about the problems you are having and I can find some things that you can try.

  Have you tried another ethernet cable?

  The same thing happens when you connect with a USB cable?

  HP regularly publishes updates of firmware that can also correct the problem you are experiencing. With the USB cable is connected, you can click on this link to download the firmware update for the. HP Officejet Pro 8600 more e-All-in-One Printer - N911g.

  Is the printer connected directly to a wall outlet or a surge protector or a power bar? We want to connect it to a wall outlet so that we can eliminate the source of energy as the primary cause. See this document for more information on the problems when connected to an uninterruptible power supply/Strip/surge protector power (Note: this document is not limited to printers Laserjet.)

  Please let me know the results, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• OFFICEJET PRO 8600 Plus: OFFICEJET pro 8600 more

  I have been using my OFFICEJET pro 8600 more for a few years with no problems until now. It is connected wireless to my network and it is unusual. I can print a single item and then it loses the connection. I have to turn the printer off and power turn it back on, then I can print another point and it disconnects again...

  very frustrating that someone knows how to fix this?

  I use Apple and PC. Same question with all devices and computers.

  Thank you

  Greg

  Hello! Welcome to the HP community @WilSwann,

  I have seen your post on how your printer is disconnect your wireless network and wanted to answer with my suggestions.

  Check out this link and try all the steps that are listed here. Normally, they help with this type of concern and hope that they will help fix yours too!

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  If there are any problems, please let me know
  
  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• OfficeJet Pro 8600 more printer

  I just bought the printer more Officejet Pro 8600 & installed without any problems, but it doesn't connect to the internet/web services? It is connected to my home network & print etc, but when I try to activate the internet according to the guidelines, it searches for a while with "Enabling Web Services (ePrint & Apps)" on the screen & then reads "Web Services (ePrint & Apps) could not be activated.

  When I tried to activate the web service during the instalation, reading pages as if she did not go off I would go to a page to download the necessary drivers but this never happened and the only thing I could do was to select the button 'Next', who finished the installion without the work of internet/web service.

  Does anyone know of this problem and if so, please can you me how to connect my printer to the internet.

  It's great to hear Roses66. "If you could mark my previous post with the ' accept as Solution" it will help others in this community to find our easy conversation.

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• OfficeJet Pro 8600 more Scan to the computer

  OfficeJet Pro 8600 more "computer scan", "Save as editable text" computer PC with Win 7 and JO 8600 Pro installed and operating normally, JO 8600 Pro on a wired home network.

  How does the 8600 file names and how can I control the names.  My 8600 JO ProPlus is name my text files using a name I once attributed to a sweep of several weeks rather than use some name generic scan or the date!

  To change the settings of advanced scanning

  Function of your printer, advanced settings contain options to adjust the brightness, contrast, quality scan, set the OCR language and change the destination of digitization.

• HP OfficeJet Pro 8600 more: right margins are ignored

  HP OfficeJet Pro 8600 more

  Windows 7 Pro 64-bit

  The new installation of Win 7 + SP1 + all available updates (this occurs on both this system and on a network XP system)

  The right margins are ignored on all documents sent to the printer.

  Have reinstalled the printer printer twice, without success.

  Printer paper options are set to 'Custom' quality (whatever that means) and plain paper (letter size).

  It doesn't seem to be an option for shrink-to-fit in Outlook 2010, so I bet the problem is a driver conflict. Try using a different driver for the printer. I'll link the instructions below. Let me know what happens.

  How to assign other drivers to print in different Versions of Windows

• "Scan To E-mail" configuration on HP Officejet Pro 8600 more N911g

  It's the same problem reported by several other users of this forum to which no solution has been provided.
  
  I was not successful to set up the scan e-mail option for a HP Officejet Pro 8600 more N911g bought 12 August 2012 and using CLP1CN1150CR firmware.
  
  I'm trying to do through the interface of the Web server built into the printer from an iMac running Mac OS X 10.6.8 and the 5.8.0 HP utility.  More specifically the page under 'outgoing Scan-> Scan to E-mail-> e-mail profiles.
  
  I tried 2 SMTP from different servers, each one works well to send the email from the computer: Apple iCloud mail service (formerly Mobile Me, formerly known as.) Mac) and AT & T Net messaging service.  I checked the server name, port number, and authentication login and password were all correct.
  
  When scanning to email serves as the printer, I get an error message: unable to connect to the server.  Check the address and the name of the server.
  
  During a test of the computer when configuring a profile of outgoing mail, I get an error message: the device was unable to send the test e-mail message. (EmailAccounts-timeout).
  
  When I try to configure the page under "Settings-> E-mail Alerts-> mail server" and use exactly the same values as those in the e-mail profile out above, registration and Test option fails with an error message: the device was unable to send the test e-mail message.
  
  Oddly enough, I am able to use the client to the computer with the option scan to the computer-> e-mail in PDF format or by e-mail in JPEG format.  With this option, the file is scanned and added as an attachment to an e-mail message from the Mail in Mac OS X client.  The e-mail message is sent via SMTP server even when I press the button send.
  
  All the error messages seem to indicate that the client software of electronic mail of the printer is unable to establish a connection to the SMTP server.  However, it is unclear what configuration setting is one that could be the cause of the problem.

  After further research, I noticed that there is another default possible values of port Simple Mail Transfer Protocol (SMTP):

  • Port 25 is the standard SMTP port number.
  • Port 465 is the number of SMTP over SSL, Secure SMTP (SSMTP) port.
  • Port 587 corresponds to the port number dedicated for a presentation Mail (MSA) Agent that uses a variant of SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the filing of mail service.

• do I have to buy color ink cartridges? HP Officejet Pro 8600 more Windows XP

  HP Officejet Pro 8600 more

  Windows XP

  The printer will not print anything (including black and white which is my default setting), at least that I have installed a new yellow ink cartridge.  He says that the cartridge is exhausted and must be replaced before printing.    I have black and white printing color cartridges? Is there a solution? Thank you very much.

  DavidDavid salvation,

  Yes, you will need to replace the yellow cartridge to continue printing. Here's a good explanation of the design of the print mechanism, and what is needed to keep them in good working condition. Your printer is user replaceable print head. With this printer's ink lines that need to be filled in ink in this way that the print head should not be clogged jets in turn cause poor print quality problems.

  Written by Bob_Headrick on the wire note: http://h30434.www3.hp.com/t5/Other-Printing-Questions/Officejet-8500-won-t-print-Black-ink-only-if-other-colors-are/m-p/1706581#M67899

  HP, as other printer manufacturers, offers you with permanent print heads printers requiring ink for all colors, avoid the print heads.  HP, like some other manufacturers, also offers printers with user replaceable print heads.  These may of may not require ink in all colors in print, even though damage may occur if the print from the cartridge empty.  Finally, HP as some other manufacturers also offers printers with the printhead into the ink supply.  He is replaced at each change of cartridge.  These printers will happily print with a diet low, empty or many deleted completely same models.

  When you buy your next printer (from HP or from another manufacturer) be sure that you understand what is the type of printer and choose one that fits your needs.

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• HP Officejet Pro 8600 more paper tray will not go

  [In the case of a post to repeat it is because I could not tell for sure one was actually published.]

  Product name: HP Officejet Pro 8600 more. OS is Windows 7

  First of all, I saw many possible solutions in Google search, and many of them related to the HP printers support blogs and none of them have worked for me.

  Like so many others, the problem started with my change drawer to manage envilopes. Many worked, but now the drawer don't go all the way - it stops at 9/16 inch short to be completely closed.

  I adjusted and readjusted the tray for legal size.

  I shook the left and right drawer closing.

  I removed all the paper and two sizing medium frame settings.

  I checked the track inside and the slider on the status bar and see no obstacles.

  I raised and lowered the ramp at the end; It lowers at the beginning of the slide.

  By pulling the drawer I found a slight resistance during his visit to the position of 1 inch.

  I slipped the paper-stop in and out and it positioned perfectly.

  I cycle powered by the printer.

  I can't help but think there must be simple somethinbg behind it all. Maybe a bit of lubricant in the mechanism?

  Help, please.

  I was right - something simple. Me. It seemed that the ferry was going all the way because of the gap between the drawer and the housing. I thought it was a problem because I have sent to the printer of things would not print. I still don't know why, but it seemed to be a problem with the mechanical - 'print' in applications is dimmed. But now everything seems to be in order. My apologies to those who have spent the time thinking about my 'problem'...