HP OfficeJet Pro 8600 N911a, no PC Interface to the printer

Similar Questions

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• HP Officejet Pro 8600 all-in-One - footer of the printed Page is cut

  When I print from a Web page, the footer is cut off.   How can I get this back to the way it was?

  I got the impression during almost 6 mos.  The problem is everything that happens.

  The footer of break was the result of opt for printing "without borders". Change to 'print with border' in printing preferences that he fixed.

• OfficeJet Pro 8600 Premium head alignment all-in-one printer

  I have a new officejet Pro 8600; everytime I try to align the print head prints four monotube black red lines then there is a noise very loud and I gives me a paper jam error. I checked and double-checked and I'm sure that I removed all packaging. The printer will be page nt a pri at the time very well. But I can't use the feature in advance such as printing on both sides of the paper.

  Any suggestions would be helpful. I can not even find the 800 number in the manual.

  Thank you in advance.

  Hi mrdlf,

  I noticed your post on your Officejet Pro 8600 not align correctly and indicating a paper jam error. I'll make some suggestions for you and publish the links below. Links are to the troubleshooting guides that I hope will help you with this problem.

  I'll also post details of HP. If the steps do not help, I suggest to call the HP Technical Support to see if they have other options for you.

  Paper jam error message

  An "alignment failed" Error Message appears on the all-in-one

  Contact HP worldwide

  Good luck to you,

• HP Officejet Pro 8600 N911a: Default community names

  Hello could someody help me know if its possible to change the default community for all the printers?

  This is because it is considered as a vulnerability by CVE

  HP Color LaserJet CPImpresor. 3525

  HP Officejet Pro 8600 N911a

  Thank you very much

  I suspect that @jfba done refers to the SNMP community name, not the name of the printerto Windows .

  I have no idea if this can be changed on the Officejet Pro 8600 printers; LaserJet 400 Pro M475dn, the value can be changed via the Integrated Web server interface:

  

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• HP Officejet Pro 8600 N911a: can not save scanned documents

  button to scan save the docs is grayed out after the scan is finished and ready to save the step

  Hi @orthoman,

  Thank you for joining the HP Forums!

  I understand that you cannot save documents scanned with your HP Officejet Pro 8600 N911a printer. I'm happy to help you!

  Please take a look at this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Hope this guide helps!

• HP Officejet Pro 8600 N911A: firmware

  I have a HP Officejet Pro 8600 N911a

  Serial No. [personal information]

  Product # CN578A

  Service ID: 23174

  Firmware version: CLP1CN1435AR

  QUESTION: Is the original firmware that came pre-installed on this printer purchased on 06/23/13.

  To be honest, I had problems with the operation of the printers over time, successfully resolved.

  I am led to understand that a later version of its Firmware is available. If that is correct, do I need?

  What are its advantages? How I did it acquire? Will receive installation instructions?

  There are further problems with the new Firmware? Thank you in advance for your help!

  ultimately, here's what happens: I had the chance to find a link on the site of "BD" that has allowed to circumvent the 'salary aid Tech' (involved only) help. For linking real chat... I got a tech, explained what was going on, he asked me to open Bitdefender a page says, asked what he's been selected... then instructed me to change about 3 settings. "BD" to close and reopen it... then try to access then asked me to test the "computer scan"... It worked like a charm! Apparently, BD software with the settings of the Moose saw an intrusion unauthorised and killed the linlk from computer to printer/scanner and killed the link.

  Once, I didn't know what to do in the future, everything worked fine... I can't tell you how many hours I spent with other BD technicians and HP is trying to solve this problem.  So, now I can place a document (etc.) on the printer scan window, go back to my computer open the link and the Voirledocument and adjust the scan size, part of the image, size and other graphic possibilities.    Because by sheer luck, I found a link to chat with a technician who knew their product and in a few minutes (not hours) directed me to a resolution that no cost me $ $ no matter what.

  Than k you, Lucien of Bit Defender!

  FORGET THE TECHNICIANS 'FEE' OF THE PHILIPPINES... (FOR REASONS I will not GO IN, I'M FLUENT IN 2 DIALECTS OF THE FILIPINO LANGUAGE - TAGALOG & ILANCANO), EVEN WITH THAT HAVE TOOL, HP 'TECH' could FIND THE TOILET WITH A TORCH!

  Message to MEG WHitman... Unload your stock, sell the House and get out of here before its TOO LATE.

  Even a deaf, dumb and blind person can comprhend this situation... Fill in the blanks...

• HP OfficeJet Pro 8600 N911a - two-sided copies

  I'm eager to take a two originals face and make a copy of both sides.  When I press the ECO button it says that this option is disabled.  I can't understand how to turn it on.

  Hello chogan

  The ADF on the Officejet Pro 8600 N911a doesn't have the possibility to make a double-sided copy. This is because the ADF doesn't have a duplex unit to get the original in paper and flip so that the other side can be copied.

  You can make copies front and back of the dumpster by setting the option and flipping the page once the first side is copied.

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.

  

• OfficeJet Pro 8600 N911a: N911a of suddenly unable to analyze HP

  I have an Officejet Pro 8600 N911a who, until a few days ago, was fully functional on my home wireless network. I am running Windows 10 on my computer. Out of the blue, the analysis feature has become non-functional 2 days ago, give me a message on the printer that the function computer scanning was enabled on the computer. Unable to solve this problem through managing the digitization of printing software to computer section, I finally uninstalled the HP software and downloaded the full setting software and driver package on the HP site for a new installation and configuration. I have had no problem adding the printer and its connection to the network through devices and printers in Control Panel 10. As before, I can print without problem, but when I try to scan, the printer status screen informs me that the function computer scanning must be enabled via the printer software. My current situation is that when I run the printing software, it goes immediately to the printer configuration screen and then hangs on 'check the network environment,' let me do the software already installed. So it seems to me went from bad to worse, because I have more access to the software is of the other features, such as ink cartridge levels. I looked online for a solution for 2 days now without success, any suggestions would be greatly appreciated. Thank you.

  Good news! Rerun the Print and Scan doctor was a complete and utter success! The printer is now on the network with full functionality restored, as well as for printing, as well as windows. Sunshyn2005, I can't thank you enough for the time and effort that you put into this! Thank you very much!!!

• Addressing the memory card SD embarked on my HP Officejet Pro 8600 N911a directly from a PC

  With my 6500APlus the memory card SD has been accessed in my case as http://192.168.0.111 \memory_card but this syntax does not work with the HP Officejet Pro 8600 N911a. Can someone tell me what syntax will work?

  Dean

  Hi deanp,.

  Follow these steps to map the card reader

  1. Insert the memory card into the printer
  2. open my computer
  3. click on network drive mapping
  4 Select the letter of the drive you want and enter the folder \\192.168.0.111\memory_card
  5. click on finish, and the Player opens for access to the files

• several vertical black lines trying to copy using automatic power HP Officejet Pro 8600 N911a

  30 - 40 randomly spaced verical lines length of page when you try to copy using automatic feeder

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 n911a.

• Storage of an HP Officejet Pro 8600 N911a

  I have a HP Officejet Pro 8600 N911a and should not be used for 6 months. What is the best was to keep it in working condition. Is it possible to store it or should I periodically send an email to the printer using HP eprint and having the printer print a page or two every few weeks? Does anyone have any suggestions?

  Thanks in advance for your help.

  Stephen06128

  Hello

  Please follow the steps mentioned in the document below.

  http://support.HP.com/us-en/document/c03007680

• HP Officejet Pro 8600 N911a will not print from Windows 8.1

  I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

  Also, there is a single instance of error code 74899

  The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

  Firmware of the printer is: CLP1CN1416AR

  Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

  What should I do next to be able to print from my computer Windows 8.1.

  Steve

  Note: This is the first issue I had with this printer that was bought a year ago.

  Hello Steve, I hope you're well

  Thanks for getting back to me with your info!

  Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

  I hope that this is the solution!

  Have a great Monday!