HP Officejet Pro 8600: Officejet Pro 8600 does not print after changing again router
8600 worked fine on wireless for a few years. Have just changed provider of broadband services and installed a new router - I ran the Setup wireless on the 8600 and it tells me 'successful connection' but blue light wireless is disabled and when I try to print from any PC in the local network printer shows as offline. I deleted the settings of the printer to a PC and tried to reinstall, but the printer cannot be found. Next steps?
Hello
Thanks for the comments. That is to say that it is not found, because the printer is not connected to the network.
Here's what we recommend:
1. replace the default wireless networks.
This resource will help you:
Restore the default network printers
2. We recommend that you use the Auto Connect (AWC) for your printer Wireless HP software installation.
Download and install the FULL features software, this wizard will help you:
HP printer install wizard for Windows
http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
If you are not familiar with the AWC, this resource will help:
Setting up the printer using HP Auto Connect Wireless wireless
Hope that helps solve your problem!
Tags: HP Printers
Similar Questions
-
my printer does not print after a new router, I configured it but still does not
I have a new router and configured it for my printer a Kodak ESP5250, I did all the things the computer told me to to try to resolve the problem, restart spooler ect, but it still won't print and I'm on my work please help. Thank you
Thank you very much for your help, I was told by a friend to the support ring at Kodak who I did it remotely, they got into my computer and solved the problem, still not sure it was good. I was impressed by the response here and it was fixed in five minutes. So if anyone has a Kodak printer that does not print from the computer, but the impressions of the printer, this is the road to go down. Thanks again for your help.
-
After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).
A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.
Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?
Thanks for your help.
Hi DaGeLi,
· Provide us with the complete message you receive.
Follow the methods below:
Method 1:
You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852
Method 2:
If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console
How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545
Otherwise, you may need to make the boot floppies. See the link for the procedure below:
http://support.Microsoft.com/kb/310994
You can also contact the manufacturer of the system to get the Windows XP CD.
For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think
-
Satellite Pro L40 does not start after changing the BIOS settings
Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.
There is no password on the bios... How would a BIOS reset to normal?
I put a windows disc now, I hear the disc spin but nothing on the screen
(I think that I have come to the right place on the forum)
It s a Toshiba Satellite Pro L40 model psl4be.
Thank you
> There was no bios password... How would a BIOS reset to normal?
You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order
But I doubt that this problem is related to the BIOS.
Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.Try connecting an external monitor and check if you can see something on the 2nd screen.
-
My Officejet 4620 Wireless does not work after resetting my router.
Today I had a problem connecting to the web. I called support of techinical AT & T who got my wirelesss router back up and connecting with my laptop. Everything worked OK except my 4620 Officejet who is communicating with the router. The blue, the light wireless flashes. The printer will copy manually.
Hi J-R-Y.
The flashing light indicates that your printer is no longer on the network, but assuming that the SW is always installed. Here is the link to a tool called HP Print and the doctor Scan that you can use to understand and help you solve the problem. The link here will take you to a downloadable document that contains information about the use of printing HP and doctor Scan, as well as a link to print HP and doctor Scan. If you have problems in the future, recommends using this tool as a first step in the resolution of printing and scanning issues. I hope that this solution works for you http://support.hp.com/us-en/document/c02073861
-
Windows 8 Pro key does not work after changing HARD drive
I had bought a Lenovo machine without installation of the OS and installed a Windows 8 Pro (and not an upgrade).
After activation ( laptop settings-> activate Windows ) and control, the copy of Windows has been properly activated.
The machine worked fine for 7 months before the hard drive crashed and I had to replace it. (Without recovery).
On installation the same Windows 8 Pro on the new HARD drive again, it shows " this key did not work." "If please check and try again or try a different key"
Please suggest a solution to this problem.
If my copy of Windows would have been an upgrade version, it would not have worked the first time.
Have you bought a copy of manufacturer of OEM of Windows 8 Pro system? Because there was no full version boxes retail copies of Windows 8 Pro. The following work around to try to see if it works with your copy and then try the phone activation;
http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html
Activation of the phone:
1. press the Windows key + X , and then clickrun, and then type: slui.exe 4
2. then press the ENTER"" key.
3. Select your "country" in the list.
4. choose the option "activate phone".
5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
6. explain your problem clearly to the support person.
-
Adobe Acrobat Pro DC does not print after update
Hello
I have a client who is tried Acrobat Pro DC, before buying and recently installed an update of Adobe. After that, she can no longer print to Acrobat Pro DC on a network print server printer. She clicks print in the print applet and nothing happens. It is not the coil in AcroPro, is not be wrapped up in the service of the coil, and it prints on the printer. No errors come at all. Already have tried all solutions in print troubleshoot PDF in Adobe Acrobat and Reader and none of them were working a repair to AcroPro and temporarily disable the anti-virus. Other applications, including the AcroReader DC can print fine on the printers on the print server. AcroPro DC will print on a local printer on a network running the same driver as the print server. Operating system is Windows 10 is 64-bit, OS Server R2 Print Server 2012. Solutions or insight would be helpful.
Thank you
Hi oz.o@tnp ,
Please follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.
Would please check after you disable you the safe_mode in Acrobat program ask: -.
Acrobat > edit > Preferences > (enhanced) protection > uncheck "Enable Mode protected at startup" & "Enable Enhanced security."
Then in this same option, on the bottom there is an option to "Add host" where you can put the name of the server & then OK.
Relaunch the application and check for the same thing.
If the problem persists, please check with the different user account to reproduce the problem.
Kind regards
Christian
-
HP Officejet 7612 large format: HP7612 will not print after change of router
I just changed my router a router Orange Virgin
Wireless printing was good before but now do not print.
The printer wireless network test results show all works well, but it will not be printed
All advice welcome
Reinstall the drivers and full software again.
-
Color LaserJet CP1025nw: printer does not print after changing cartridges
I just inserted cartridges M, Y and C in my printer. They are official cartridges 126 a. I followed all the instructions (shook gently, removed the orange protective cover and pulled the Ribbon out). I inserted one at a time, waiting after each insertion for the printer to run through its cycle. Then I tried to print a color print job with no luck. Then I tried to print a simple typed page - once again, no luck!
Is it possible to print a test page? I don't get any messages on my computer. When I look at the print queue, it says "error printing". Help, please! Thank you.
Note later: my mistake! I turn on the blue light from the top; Once lit, the printer has been good to go. Can tell you that I'm not very technologically savvy?
So it works very well now?
-
HP laserjet p1006: does not print after changing the toner
I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!
Hi @cindycb,
Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
Make sure all the orange, packaging material is to remove the toner.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
Try and print a self-test on the printer hardware to see if it is a hardware or software problem.
Open and close the cover five times quickly. It should print a page with black lines on it.
You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.
You use Genuine HP Toner?
Please let me know the result and if there is anything else I can help you. Thank you.
-
HPDeskjet 3070 DOES NOT PRINT AFTER CHANGING CARTRIDGE.
After changing all four cartridges in printer Deskjet 3070, is no longer prints black, produced a blank sheet on the copy function and will only print jpg files, this happens with the Dell laptop on USB or network, also Dell laptop computer on the network (not tried USB). The printer worked perfectly before the change, on the site of consumables HP HP cartridgesare. This is the third change of cartridge (HP, always) since the purchase of the printer in November 2011, they appear in the last four months.
Hello JohnFo
So the color is printing, but not black? What happens if you make a color copy by using a black text word document? I suggest as a result of the article below. It contains troubleshooting steps for the white pages. If the problem persists check the next few sentences.
Printer prints white sheets of paperThe problem could be a bad cartridge. Before working on the printer as the article suggests you should contact HP. All authentic HP ink cartridges come with their own warranty, so if you call HP on the cartridge, you should be able to replace to help determine if the cartridge is the problem.
-
First Adobe Pro CC does not work after update code 0xc000001d
First Adobe Pro CC does not work after update code 0xc000001d
W7 OS 2
Hi Gernots,
For a fix, update for first Pro CC 2015 (9.2).
Thank you
Kevin
-
Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages
the printer is not the shades of grey even print cartridge is not yet empty
y at - it software for hauler color printing?
Thanks for your comments
Hello Nilsvolkel,
Thanks for the reply.
I'm sorry for the late reply.
I appreciate your patience and time.
Do not require any special software.
However, you can use the steps in the following articles and check.
Reference:
http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7
Please keep us informed.
Thank you
-
OfficeJet 8600 does not print faxes
OfficeJet Pro 8600 more. Windows 7. Printer receives a fax but does not print. Go to tools Fax and select fax reprint in memory. How can I put it all simply print faxes as they come?
You are welcome. In fact, I thank you for your patience with me. This looks like a simple décor, such as Fax To PC is turned on. How the printer is connected (USB, Ethernet or wireless)?
Do you get a fax notifications on your computer? I created a digital Fax folder using the digital Fax Setup Wizard and it asks if you want to automatically print incoming faxes. I will include a picture and let me know if this configuration page looks familiar.
-Setting up digital fax HP to save received faxes to your computer- click on this link for more information about the digital fax to PC configuration.
The best way to know if put you it in place is to go into your basic fax settings and select HP digital fax at the bottom of this menu. If he tells you to complete the installation, then you have not done this.
I think that maybe it's the feature prevents printing immediately your fax. This will work only if you have set up the printer on a wireless network.
Maybe you are looking for
-
new iPad 2 Air restore your last backup of old iPad. It was "Updated iCloud parameters" for more than 3 hours. is this normal?
-
Portege Z830 - fan noisy and almost always running
My new Portege Z830 has the issue of noisy fan and almost always running which has been said here before. Recommendations were that we download bios 1.6. But I checked and that the version is already installed on my machine. I also adjusted the power
-
Can I use the Satellite A215 for Satellite L305-s5921 recovery disk
My laptop crashed (series Toshiba L305-s5921).I do not have the restore disks, but I have the recovery disc for my Toshiba A215 series. Can I pick up my laptop with this drive.
-
Why did you remove the option the APP for AppleTV Radio Music in this new update?
I'm only not is not thrilled, in fact completely disappointed, the Radio part of the music app has been removed? What was the point of this?
-
cannot uninstall or reinstall iTunes
like many people here, I use XP Pro 32 bit sp3 and IE 7 but I use Firefox am unable to completely uninstall or reinstall iTunes and have been at that moment, about 10 days attempted to understand speech and do the step by steps, but nothing helps I d