HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

I need the hp Device Manager configuration so I can use all the options off the officejet.

Problem solved.

The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

Tags: HP Printers

Similar Questions

  • OfficeJet Pro 8600 Plus does not fax

    He just did not react, even if the Test Fax is OK (all PASS). I did a lot of testing. Sometimes (well only once so far), it does not recognize a call (I call from a cell phone, but I know clients that it does not meet either ordinary fax machines) and connect. Sometimes, he gets the call, but ask me to accept it, although the auto answer is on. And most of the time, almost always, it does not react at all.

    It is a series of N911g Officejet Pro 8600. Brand new. It is connected to my PC (win7U) via USB, no configuration wireless fantasies at all. I tried to install manually and with the wizard, both directly on the printer to the computer. Everything fine each time, including a successful fax test all. But then no reaction. The line is a Fax line, with its own number, only for faxes. No problem to send faxes. I have tested the line on another printer (Epson PX830), with the same cable, just unplug the phone line on the Officejet and plug it into the Epson: no problem, all calls answered.

    Any ideas? Thank you!

    It works with the new NT. I was even able to programm with the fax: for lines analog, you will need to enter your analog number manually in the NT by using an analog phone (or perhaps a more intelligent device for the pros, I guess). I just send faxes empty a little with the codes as numbers. I got an error message from the phone network, but the new testament had already swallowed the codes from here here. I have not tried the cable: too happy it works finally.

  • What do you do if your cd/dvd drive does not exist in the Device Manager but always turns upward when you put a disc?

    HI, I lost my cd/dvd drive. It was there before, and when I had a successful previous problem to solve this but not this time. I did the upper and lower bit of regedit but without success. When I picked up this last time I learned to do something with the power reset but can't remember how now.
    I can't even get off the ground with the help of microsoft as cd/dvd players do not appear on my device manager.
    I use a portable Pavilion of HP9000 with a play version of Vista that is updated.
    Everything else works fine but just not drive.

    Hello

    I would like you to follow the steps below and check them off if they help.

    Step 1:

    I suggest to Uninstall third-party software for CD burning temporarily and check if the CD is recognized.

    Step 2:

    I would say that you go to Device Manager,

    a. click on 'View' and 'show hidden devices ',.
    b. once the device is found, click top and "search the hardware changes.

  • My new HP Officejet Pro 8600 N911a does not allow a webscan

    My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

    Anyone has a suggestion to solve this?

    Hello tutoke

    The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

    1. Click settings
    2. Click the administrator settings
    3. Check Webscan
    4. Press on apply downstairs.

    Try to scan the image.

  • computer (Vista) tells me there is a problem with a scanner, I have not, say to uninstall, but it does not appear on the Device Manager

    tried to install camara, but when it says click on your product, but the camara is not on the list, only scan appears on the list, but I don't have a scanner. tried to uninstall, but does not appear on the Device Manager. try to download programs, and they do not arise in Start menu, just uninstall it list? Thank you

    Hello

    I suggest to uninstall unwanted software from your computer and then try to install the camera. Visit the link below to find the steps on how to uninstall programs "programs and features".

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    After you have installed the camera, please check in the folder C:/Program files if it shows there.

    It may be useful

  • DVD/CD drive is not visible in the Device Manager, but it works.

    Original title: My dvd/cd drive is not visible in the Device Manager but

    This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

    Hello

    See the methods listed in the article mentioned below.

    My drive does not appear in Windows Explorer

    http://support.Microsoft.com/kb/330140

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

    See this link to view the hidden devices:

    http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

    I hope this helps!

  • HP Officejet Pro 8600 Plus do not print hardcover

    I tried the solutions posted: 1) made sure the tray 2 is not installed. (2) printed 100 white pages of plain paper. (3) modified preference hardcover and paper media.  However, I always get out of paper message when you try to print on thick paper.

    This is a new printer. Help!

    Hi hubox,

    Welcome to the HP Forums!

    I understand that your HP Officejet pro 8600 more do not print card stock, and I'm happy to help with this problem!

    To get help, I'll need to know:

    In the meantime, please take a look through this paper guide. ' A ' Out of paper ' or 'Choose the motor at a standstill' message and the printer not picking up or feeding of the paper in the main tray.

    I hope to hear from you and thank you for posting!

  • OfficeJet Pro 8600 Plus: can not get the printer to function after installing new wireless router

    I recently changed routers from D-Link to a Netgear R6400.  I could get my desk, the laptop and the i - Pad to connect to the new network, but not my HP Officejet Pro 8600 more.  When I try to change the IP address, which is what I think I do, the screen indicates "this feature has been locked by your system administrator or the one who put up the system."  I'm the only one using this printer and I put in place originally, but I do not remember 'locking' anything.  Will you please tell me how to solve this problem, so I can use the printer again.

    Hello

    Thank you for using the HP forum.

    A suggestion that we recommend is to uninstall and reinstall the software FULL of features.

    Alternatively, you can try the doctor print and Scan?

    Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

    http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

    Hope that helps.

  • HP Officejet Pro 8600: Printer does not print in color

    I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

    Hi @monitons,

    Welcome to the Forums of HP Support!

    I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

    To determine the cause, I would like to use this document:

    If the problem persists, I suggest you try a new complete set of ink cartridges.

    How many times have you filled out the ink in these cartridges?

    TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

    Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • OfficeJet Pro 8600 Premium: HP OfficeJet Pro 8600 Premium does not print Windows with Word 2016 10 envelopes

    After that I have upgraded to Windows 10 and Word 2016, envelope and label printing feature would no longer work on all-in-one printer, HP OfficeJet Pro 8600 Premium.  Please provide any possible solution.

    Hi @dshirley22,

    Thanks for the response back.

    I would at this point uninstall all previously installed printer software. If you need assistance, here is a document that can help - uninstalling the software of the printer (Windows).

    Once the software is uninstalled, use the HP printer installation wizard to help install the software. This tool will search and find the version of the drivers and the printer software up-to-date.

    Please let me know if that solves the problem, or if you need assistance.

    In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • OfficeJet Pro 8600: Officejet Pro 8600 OCR does not not on Windows 10

    I need analyze many articles and OCR is essential. I tried to use the program to scan HP on my computer, but it does not give me the option to save it as an indexed PDF. I uninstalled the HP software and I tried to reinstall from the disc supplied, but it does not work because I'm running Windows 10. I then downloaded the software from the HP Web site, but when it came to choose what I want to be installed, he said what I.R.I.S. OCR is already installed. I checked in my programs and it cannot be found. In any case, I continued and opened to the top of the HP screen and tried to scan, but it doesn't always have the option to indexed PDF. I tried the solution resolved on another thread and completely everything reinstalled, but nothing has changed. Then I found another thread with a link to a download Readiris Pro 14, but it says that I need to finish activation by putting the rear HP CD, which does not work because I'm running Windows 10. So now I can scan, but I have no OCR.

    What should I do?

    I could solve the problem.

    I used the instructions on another post to completely remove the OCR using Microsoft Fix It application, which then allowed me to download the HP software again and install it from scratch. Now I am able to install the OCR software that comes standard with HP printers.

    This is the post with the solution: http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/How-to-completely-uninstall-all-traces-of-HP-Photosmart/td-p/2468991

  • HP Officejet Pro 8600 Plus: Streak black left on the original after copying Document

    Product: HP Officejet Pro 8600 more N911g, only one month, bought at HP online

    Problem: Each document that I put into the automatic document feeder coming out with a black streak in the center of the paper. The copy is a perfect quality, while the original is left with the brand. I don't see a roll of Center when you open the service on the ADF Panel, but I'm probably wrong. What should I do?

    If the line appears on the original after running through the ADF? The line does not appear on the copy image?

    * If this is the case, then I advise you contact HP Technical Support on this product because it is very new, as mentioned above. HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

    HP Technical Support call case form:
    http://goo.GL/w7Hgh

  • OfficeJet Pro 8600 Plus: scans with USB, Ethernet 10 Mbit/s but with 1 Gbps

    I installed my router a Netgear router from 100 Mbps to 1 Gbps router TP LINK Archer C8. I use a printer more Officejet Pro 8600 with scanner. Scanned the fin on the Netgear router, it is not scan with TP link sanner. I get an error "Scanner communication cannot be established. I changed to a USB connection and was able to scan successfully. I noticed the printer only has 10 and 100 a half and full speed duplex settings. The scanner is not compatible with a 1 Gbps puts? I uninstalled and reinstalled several times printing software.

    UPDATE : tried the HP Scan and Capture application in the Windows store. Works very well. Must be some type of problem with the native drivers scan and connections broadband.

  • Realtek NIC does not show in the Device Manager - until a hardware scan is done

    A few months ago, I purchased a dv6 3240us and not downgraded to XP Pro win7 no problem, everything has been installed - everything I tried worked fine without any problem at all. I do not use this computer on the Internet - but I got the opportunity to connect the NETWORK card to a piece of equipment, I was working on that. When I went to change the IP address of the laptop - no local NIC (supposed to be Realtek) present in the Device Manager.  I installed the driver when I went down to XP without error.  I can only see the wireless adapter and it also shows on the system tray. When I right click on network adapters in Manager devices and do a scan for the hardware - the Realtek card is? and now everything works fine until I stop, then I have to go the process again. I watched the Realtek driver and he says its all working properly - any suggestions?

    Hello:

    I'm not familiar with the BIOS settings too consumer laptop, but see if there is a setting for a LAN Power Save Mode - maybe in the configuration menu of the device.

    On HP Business laptops, there is such a context, and the default value is enabled. What is this setting is to remove the wired NETWORK card at least that the PC is plugged in and connected to a LAN cable. This saves battery power.

    They also have a LAN/WLAN definition switch that disables the NETWORK adapter when the other is in use. For example, if I plug a wire to my Wired NETWORK card, my wireless NETWORK card is automatically disabled.

    If you have such a LAN Power Save setting, turn it off, and your NETWORK card must always be visible in Device Manager.

    Paul

  • HP OfficeJet Pro 8610: 8610 does not connect to the password protected network (but connects to the unprotected network)

    I had a HP 8600 that connected to my WiFi at home.  It broke and I replaced it with a HP 8610.  When I try to connect the new printer to my WiFi at home, it is not identifying the printer in the search process.  I have searched the forums and tried to correct the problem and nothing works.

    HOWEVER, I've set up a WiFi comments without password protection and when I am connected to this network, the HP software recognizes the 8610 and I can install it.

    I hope that the foregoing will provide enough information to identify the source of the problem and a solution (easy) (?).

    Thanks in advance for your help.

    -JW

    Hi @JDWUser,

    I'd love to help you with your 8610 replacement printer. I understand that you had the 8600 on your network, but the 8610 will configure not to password protected network. I recommend you to go through this guide How to find the WEP or WPA key or the password of your wireless network, just to check your wireless password.

    Is your password contains special characters that maybe the printer does not? Are adjust you upper and lower case? I know that you explained that your password has not changed and that the printer has been configured successfully on the network before, I'm just trying to isolate a potential cause.

    Restore the default network on the printer then rerun the wireless Assistant might help.

    What is your type of encryption, and who is your supplier of router?  I saw a problem recently with WPA2 secret codes, but this issue seems to be from some routers and firmware updates.

    Please do not forget to keep me informed of the outcome of your efforts in order to contact you, and don't forget to post back with the asnwer the questions I asked. Thanks, I look forward to hear from you.

Maybe you are looking for

  • IP default GPIB-enet/100

    I have a GPIB-ENET/100, which has been reset to factory default. I want to set a new IP address for her, but I was not able to know what is the default IP address, so that I can put IP my computer and subnet mask to allow me to find it on the local s

  • Problem using analog feedback on pix7340

    Hello I try to use analog ForceFeedback on one of my lines on pxi 7340. The problem is that MAX always use encode as your comments even though I have set up as analog. MAX I disabled the encoder and activated the ADC suitable for axis and set the pos

  • moved taskbar at the bottom right

    The taskbar at the bottom of my PC are moved to the upper right side. How can I move it? It also causes my window size to be only 90% of its normal size.

  • WRT300n: disable 802. 11B wireless

    Is it possible administratively disable 802. 11 b radio on WRT300N? The reason is to not let the 802. 11B client to connect to my router, while 802.11 g and 802.11n clients should get access to the network.

  • How to disable the UI on A2109

    I noticed in my question about 2 Anti Virus programs exisiting on the same shelf witout rooting togethr I could go back to settings and disable Norton and then I could install my favorite Anti Virus safe. My question is if I can do the samething to g