HP Officejet Pro 8600: print the page top

When I print the forms on the internet - in this case a specific Web site - printing cost overruns the right margin of the page, so I see all of the form that is being printed.  Last year when I printed this form, it fits on the page very well.  Same computer, same printer

This happens on a number of sites that I deal with, so I don't think that there is a problem with the site, I think it's a problem with the installation of the printer, but I have no idea what could be the cause of the problem.  Any help would be appreciated.

Hey @Monajo,

Thanks for getting back to me regarding this printing problem.

Now that we have isolated the problem to a problem of Mozilla Firefox, we can work toward a resolution. To begin troubleshooting I have you check the page scaling settings within Firefox. Please follow the steps below.

1. open a Web site that you want to print from Mozilla Firefox

2. click on the Firefox Menu option and select print

3. you will now see a print preview of what will Mozilla Firefox 'send' for your printer to print. Click Page layout on the top

4. in the Page layout dialog box, you can select the 'reduced to fit page width"or"scale"option If this is not the case try first "Reduced to fit Page Width" option. If it is already selected, choose the scale option. You can play with the scale. For example, I adjusted my scale to 20%. When I hit OK, the print preview window shows the document to print as tiny. That's what your printer will print. If it is too small, you can click the Page Setup button again and adjust the scale until you find a scale that displays the preview before print correctly.

5. press print once you make all necessary settings.

Don't forget, your printer will print than it is "said" to print through the preview window before printing.

Please let me know if the setting of the "Shrink to the width of the Page" or "Scale" options fix this problem for you. Good luck!

Tags: HP Printers

Similar Questions

  • HP officejet pro 8600 prints the document around, but on any OTHER page

    Please see above the subject.

    Printer preferences changed.

    Five test pages print.

    It worked. No blank pages of morse.

    What now? Let set to the "BEST?"

  • OfficeJet pro 8600 print a single vertical black line when using the charger

    OfficeJet pro 8600 print a single vertical black line when using the charger

    Hi @realestatejeann,

    I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

    Vertical stripes, lines or streaks on Copies, faxes or scans.

    If you need help, let me know.

    Good day!
    Thank you.

  • OfficeJet pro 8600 printer-how to make this program work and installation?

    I have problems printing. I wonder how to ste it to the top and do work.

    Moved from feedback

    Original title; printer Officejet pro 8600

    Hi David,

    1. what operating system is installed?

    2. what security software is installed?

    You can go through the printer manual to know how to set up the printer and make it work.

    You can also refer to these items and check if that helps.

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

    http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

    I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

    Hi @Procats,

    Welcome to the HP Forums!

    I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

    Please, try the following steps:

    Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.
  • OfficeJet Pro 8600 causes the computer cursor indicate that the system is busy (turning circle)

    I have connected the Officejet pro 8600 printer to my wireless home network and continuously now the cursor on the computer will indicate that the system is busy producing a turning circle every 5 to 10 seconds. The computer is running Windows 7 Home Premium 64 bit operating system.  I went to the Task Manager on the computer and has determined that a file named HpNetworkCommunicator.exe is the origin of the problem in cycling on and off (looking for a signal). I turned on the printer and the file remains on and the problem is solved. However, I don't want to leave the printer at any time, is anyway to stop this file from the search for the printer when the printer is turned off?  Thanks in advance.

    Hello

    Please follow step one below and check for any progress:

    http://support.HP.com/us-en/document/c03191239

    If the problem continues without change, follow the second step as well.

    Kind regards

    Shlomi

  • HP Officejet Pro 8600: Printer does not print in color

    I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

    Hi @monitons,

    Welcome to the Forums of HP Support!

    I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

    To determine the cause, I would like to use this document:

    If the problem persists, I suggest you try a new complete set of ink cartridges.

    How many times have you filled out the ink in these cartridges?

    TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

    Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • OfficeJet Pro 8600: White scan Pages of the feeder of the Officejet Pro 8600

    Trying to browse the food tray, scanner empty pages. Analysis on the flat. I tried to restart the laptop and printer also does to unplug for a minute.

    Hey @cornerstone1,

    Welcome to the Forums of HP Support!

    I see that your Officejet Pro 8600 e-all-in-one printer is the digitization of the blank pages to your machine in Mac OS x 10.8. I can help you with that.

    First of all, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once this is done, we will do a few things to refine the question. To do:

    1. Place a page with printed face down on the flat.
    2. Place a page with different print material face up in the ADF Document (CAD).
    3. Make a copy of the printed page.

    The next steps will depend on what is printed.

    If the printer made a copy of the page on the flat:

    The printer does not detect anything in the charger. Try to insert a blank sheet of 8.5 "X 11" or A4 paper and see if you hear a noise or identical to "document loaded Original" message. " If you have not the printer will need to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

    If the printer did a Virgin copy:

    Take a blank sheet of paper, write a 1 on one side of the sheet and number 2 on the back side. Then insert the paper in the tray and make a copy. If you still see a blank page then the printer will have to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

    If the printer made a copy of the page in the ADF:

    There is a problem with the drivers scanner on your Mac. To correct this:

    1. Unplug the USB cable from the printer, if it is connected to your Mac.
    2. Click Apple, system and print and Scan preferences.
    3. Hold down the CTRL key and click on the picture of the printer on the left.
    4. Click on reset printing system.
    5. Open Applications and your Hewlett-Packard folder.
    6. Launch the HP uninstaller.
    7. Open Applications, utilities and disk utilities.
    8. Click "Macintosh HD" on the left.
    9. Click on verify disk permissions. This should take about 10 minutes.
    10. Click on repair disk permissions. This should take about 10 minutes.
    11. Restart your Mac.
    12. Download and install the latest drivers by clicking on this link.

    At this point, you should be able to scan from the ADF.

    Please let me know if that solves your problems by clicking on accept Solution below my post or if you have any other questions. If not, have a great week!

    If you appreciate my help please click on the icon below my post thumbs up.

  • HP Pavilion: validation of the officejet pro 8600 printer failure

    I am connected to my Officejet Pro 8600, can be seen in the list of printers, I can send documents to the queue print - but when I try to complete printing, he seeks the printer and I get the message "printer Validation failed."  Help, please!  It works perfectly fine on other laptops in the House.

    Hi @CAAJ,

    Thank you for joining the Forums of HP Support!

    I see that you have installed the printer, but it still won't print. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.
    What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?

    If the problem persists, try the steps in this guide:

    I hope this information is useful. Please reply to this message with the results. Good luck!

  • How are added to the HP Officejet Pro 8600 printing solution Center

    The center of printing solutions shows my Photosmart C5580.  No idea how to add an OfficeJet Pro 8600?

    Shlomi Hi and thanks for a quick response.

    I had hoped to add 8600 Solution Center as an HP upgrade / download link in the menu Wizard printer you mention using the icon, re - set the default printer for the "8600 Fax.

    He also changed the list of this menu screen to be only four: HP printer Asst (but does nothing when a click), Set Prefs, see what printing and the printer to customize.

    Previous menu, as you no doubt refers, had several printer features that included all submenu links functions, I used (including to scan a doc, preferences, etc.).  Frustrating...

    After uninstalling and reinstalling, tweaking, etc, I always have this quick menu by clicking on the icon of tune.  I have tried different methods of scanning as the right click on the printer in Control Panel devices, but the scanning from which lead to a horrible list of basic functions, a confusing list of formats, etc.

    Finally, I did a scan in the screen menu of the printer who made a point "scan" in the Start Menu, I right click it to pin that on the Start Menu, then created a new shortcut on the desktop with the path to him... and now the icon / printer works to get the menu scanning.  Phew!

    About the loss of the Solution Center is regrettable.  Very handy tool to do the various tasks and the refinements of a scanned document that do not exist in the limited functions / buttons on the 8600 scan menu results.

    At the same time and while I'm... To the laserjet subject large workhorse of HP LJet 1320, several other positions and all forums have problems loss of functionality after passage from XP to Win7.  I finally got all but one device works (PCL6/5th, printing on both sides, etc.), but the pilot is only 600 dpi quality close to the project, instead of the prior 1200 dpi (especially good for forms, thin fonts, etc..).  Which is just a discharge on the technology and support for the products that brought me as a customer to use HP in the first place.

    Thanks again for your reply and your suggestions.  Ready to try anything to solve the so-called reliable downloads / upgrades.

    Best regards...

  • OfficeJet pro 8600: printer works fine, but the software is not

    Printer works fine.

    However, the HP support the program "HP OfficeJet Pro 8600" will not start. I can see it in the HP folder under all programs, but clicking on the program name has no effect. The program name poins to "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage Start

    In addition, in devices and printers in Control Panel, the printer connected displays. By double clicking on the icon takes me to...

    Opening HP All - in - One Printer Remote takes me to the window right... but the printer shows offline, and the various functions (scan, fax, etc.) are not available. (As noted, the printer is currently online, and I can print correctly.

    Connection to the wireless printer.

    All these functions work fine if I call them from the physical control on the front of the printer Panel.

    I don't know if these are two separate issues, or the two aspects of the same problem.

    Any thoughts?

    Thank you.

    Hello

    Try to install the following hotfix, then try to open the HP Officejet Pro 8600 software:

    http://support.HP.com/us-en/document/c03640384

    You can see any difference?

  • Unable to connect my Officejet Pro 8600 to the network because of administrator settings

    Hello

    I recently bought an opportunity of Officejet Pro 8600 and I am unable to set it to my home network.  When I put in place-> network-> Wireless Setup Assistant (and all options in the network menu and many others) I get a message that says: "this feature has been locked by your system administrator or the person who set up the printer."

    Help, please.  How to get around this problem and unlock all the menu items that are locked?

    A milion, thank you

    D

    Hello derekd01,

    Welcome to the HP Forums!

    I understand that you are unable to connect wireless Officejet 8600 because you receive a message "this feature has been locked by your system administrator. I will do my best to help you!

    There is an administrator through the Embedded Web Sever settings, but in order to access it, it must be connected to a wireless network. Unfortunately, you are unable to access the wireless configuration. There are two options you can try:

    (1) you can connect an Ethernet cord, and then go to the Embedded Web Sever.

    (2) you can install the printer on your computer by a USB cable. Complete installation, and then follow this HP document convert a connected USB printer wireless. Once this operation is complete, you can access the Embedded Web Sever.

    Once you get this printer, follow these steps in the Embedded Web Sever:

    (1) at the very top of the page, click on settings, then password settings
    (2) if there is a username and password, please remove this item and click on apply

    Please post your results, I will be looking forward to hear from your part have a good night!

  • OfficeJet Pro 8600 print Face down

    OfficeJet Pro 8600 n911a 8 32-bit Windows

    It seems that if I print a single page with automatic duplex printing disabled, the printed page is put in the face of to the top output tray.  If I do the same with duplexing on (back long edges), the page is placed in reverse.

    Is this normal or preventable?

    Hello

    I don't know why your old printer make this but all 3 printers (from 3 providers) at home do the same thing and I can access dozens more by other sellers to work and they also do the same thing.

    Forward, thinking to print documents pages MULTI 2-sided, if all are facing upward, you must sort the documents by hand unless you print last page first.

    Kind regards.

  • OfficeJet Pro 8600 more full page

    How can I get the HP Officejet Pro 8600 more printing bleed? In portrait mode, it leaves a. 1 "margin on the right side and bottom. I went into the menu advanced and selected without border and use of photo paper.

    Thoughts?

    Hello

    Which application do you print? What is a photo/image or text? Please check the following information (from manual page is #43):

    Kind regards.

  • OfficeJet Pro 8600 - Print margins are off, slow and noisy printing

    I have problems printing my printer HP Officejet Pro 8600. When I am able to print the process is extremely slow and the printer made a lot of noise before and during printing. In addition, the margins are off compared to those on the document itself. The left margin is so great that it is cut a part of the document on the right side. I tried to unplug and restart the device and it is set back to the factory, but the questions remain. I printed a test page and it looks good, but speed, noise and margins continue to be a problem. How can I fix these problems?

    Thank you!

    What you mentioned, it seems that something is happening with the material. Here are two links to try to fix it, please choose the one that corresponds to the computer you have

    Slow printing in Windows: hardware issues

    Slow printing in Mac OS X 10.4 and later versions: printer problems

Maybe you are looking for