HP officejet pro 8600: printer will not be used with the document in the queue

Similar Questions

• my HP Officejet Pro 8600 printer will not feed

  All the lights are out on my printer. I tried to unplug, plug is fine, reconnected. Nothing happens. Is there a switch on / off or reset? I've only had this printer for a few months...

  Hello

  I would suggest trying a hard reset with the device. This issue could be the cord powerd.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• HP Officejet Pro 8600: Printer does not print in color

  I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

  Hi @monitons,

  Welcome to the Forums of HP Support!

  I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

  To determine the cause, I would like to use this document:

  • Fixing poor print quality

  If the problem persists, I suggest you try a new complete set of ink cartridges.

  How many times have you filled out the ink in these cartridges?

  TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro 8600 Plus will not be printed

  I just bought a HP Officejet Pro 8600 Plus, and I've connected two PC and two iPads to it.  I also plugged on my Macbook Pro (iOS 10.6.8), but unlike four other devices, the Macbook will not print.

  The Macbook watch the installed printer, sends the print job, but nothing prints.  I reinstalled the printer, the driver updated and reset the system print, all nothing will do.   I know that the Macbook and printer can communicate because I can print a test page for the HP utility in the browser.

  You do not know this information helps, but I have observed in anticipation of eventually being removed from their own print jobs.  I also noticed that, strangely enough, a print job will appear in the queue, I try to print the levels of power, but I was not initialized it.

  What Miss me?

  (Btw, it's a wireless installation.  I read that others troubleshoot using a static address, but this isn't an option for me. My ISP router will not work with a static address.)

  After much research, I found someone else on this forum who has had the same problem and found a solution.  I post the link below in case someone comes on this post.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/OfficeJet-Pro-8600-will-not-print-on-Mac-OSX-10-7-5/m-p/2307027/highlight/true#M80392

• HP Officejet Pro 8600 N911a will not print from Windows 8.1

  I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

  Also, there is a single instance of error code 74899

  The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

  Firmware of the printer is: CLP1CN1416AR

  Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

  What should I do next to be able to print from my computer Windows 8.1.

  Steve

  Note: This is the first issue I had with this printer that was bought a year ago.

  Hello Steve, I hope you're well

  Thanks for getting back to me with your info!

  Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

  I hope that this is the solution!

  Have a great Monday!

• HP Officejet Pro 8600: Printer will be not stupid on loan

  There is a problem with the printer or the ink system. Turn the printer off, then on. If the problem persists, contract HP using guarantee

  Just installed black cartridge then this problem

• OfficeJet Pro 8600 (CN578A) will not feed photo paper.

  New N911A will not feed paper tray default photo. It gives an out of paper message. Regular paper feeds very well. The optional feeder is not installed (I have not). This is a brand new, out of the box machine replacing a C7280 with failure of distribution of ink. I used this article to all my printers previous HP with no problems. This is HP Advanced Photo paper (66lb/10.5 mil, sense of self)

  Just got off the phone with HP... my printer BRAND NEW so... Remove the tray paper... tip top printer has left... using a clean t-shirt... Clean the gray rubber roll... a little... hard paper will feed properly...

  That is all... should not have to do, BUT it's best that packing this f * er on the rise and water and the ascent to Costco...

  have a nice day

• OfficeJet pro 8600 more will not print card stock

  Ok. This is what worked for me. I bought a HP 8600 PRO Wireless today, Sam's Club set it up to print plain paper. Everything was fine. Then I got stock index impression of disorder, 65 lb, 175 g/m2. I kept getting an error "on paper." I changed the mediaprinting preferences: card stock and less paper size: letter of card index. The printer looks bad pick up the first two pages, but then picked up the other four pages and printed. A total of six pages printed on 65 lb, 8.5 "x 11" card stock. I hope this works for you all.

  Hello

  I am happy that the problem has been resolved.

  I would be grateful if you can click on the button of Kudo to show that the problem has been resolved.

• All-in-one printer, HP Officejet Pro 8600 Plus will not print the image in the logo of the company

  I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.

  Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.

  Any suggestions?

  Thank you for responding!

  It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.

  This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.

  I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.

• OfficeJet Pro 8600: Scan will not save

  I just installed masOS Sierra & now for some reason when I scan a document I can't save it to my documents.

  The Save button is there, but not highlighted.

  I restarted in safe mode, rebooted and reinstalled Sierra.

  Does anyone know how to fix this?

  Hello

  Please, try the following:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/upgraded-to-Mac-OS-Sierra-version-10-12-now-cannot-save/m-p/5816209/highlight/true#M153323

  Kind regards.

• HP Officejet Pro 8600 Plus do not print hardcover

  I tried the solutions posted: 1) made sure the tray 2 is not installed. (2) printed 100 white pages of plain paper. (3) modified preference hardcover and paper media.  However, I always get out of paper message when you try to print on thick paper.

  This is a new printer. Help!

  Hi hubox,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8600 more do not print card stock, and I'm happy to help with this problem!

  To get help, I'll need to know:

  • If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  • If the printer is connected, USB, Ethernet, or wireless.
  • If the printer is capable of making copies of itself.
  • If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  • The size of the stock card.
  • The weight of the cardboard.

  In the meantime, please take a look through this paper guide. ' A ' Out of paper ' or 'Choose the motor at a standstill' message and the printer not picking up or feeding of the paper in the main tray.

  I hope to hear from you and thank you for posting!

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.