HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

Similar Questions

• OfficeJet Pro 6830: there is a problem with the printhead - estimate of repair costs?

  Getting the message "There is a problem with the printhead".  Found the document tracking and troubleshooting got to step 3 where it says "the printer to Service."

  Naturally, when I checked, I found that our guarantee missed three weeks ago.  The printer lasted more than a year...

  No idea what it would cost for this repair?

  Or given the pricing model for ink jet printers, are we better off he throw?

  We had an Epson printer that has lasted several years; Maybe we should go back to them?

  Hello

  Try to contact the HP Support by filling out the form below, you will receive a case number and the details of the phone:

  Note: Changing the country click and select your region as required

  https://support.HP.com/us-en/contact-HP/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308

  Be sure to have proof of purchase available to provide the necessary technical support representative.

  In my opinion, that they might be able to help without charge if shortly after the end of your warranty period (even though I'm the head of my experience, not on behalf of HP).

  Do it as soon as possible and let me know how it goes.

  Shlomi

• OfficeJet Pro 6830: There is a problem with the printhead

  There is a problem with the print head.  Or can not find the print head

  This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

  turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• HP OfficeJet Pro 6978: There is a problem with the printhead

  I am trying to install my new printer.  Turned on, the screen displays this message: "Is there a problem with the print head."  I have downloaded all the software and drivers, installed ink cartridges that came with your printer, followed the troubleshooting online and still the message will not go away.  I registered the product and tried to contact the HP support, only to get the message that this device is no longer supported by the HP BRAND - it's NEW!  I can't find phone # for support, so I'll try this forum.  If no help, I will just return it.  Very frustrating.

  As it is brand new is not same Jack with it. Take it for a full refund and buy something else.

• HP Officejet Pro 6830: There is a problem with the printhead (0xc19a0003)

  Hello

  Hoping someone can help me. Bought my printer only within the last few months & this error. Followed the reset of the measures recommended & also used the doctor HP soft but still no luck. Appreciate any advice.

  Thank you

  Kenny

  Hi Kenny, the best bet is to contact the HP Support that you will need a replacement printer. If you are based in the United States on the link verifying contact support at the top of this page...

  http://support.HP.com/us-en/document/c04839288

  Can you please let us know how you get on?

  Thanks, Ciara

  

• There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  Why?

  Please tell us what Adobe application you are trying to download. Please try creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• N911a HP Officejet Pro 8600 error scanner cannot communicate with the computer.

  Original title: is anyone has the sweep of HP Officejet Pro 8600 n911a problems when you use Windows 7 Pro?

  Just bought this laptop of HP Pavilion dv6-7138us, and had the updated operating system upgraded to Windows 7 Pro, directed by Office Depot until I take possession.  The all-in-one HP Officejet Pro 8600 n911a (bought a few months ago) will be analyzed to this laptop.  I can't access "managing the scan of the computer."  When I try to open the scanner of the icon, the message begins with "scanner cannot communicate with the computer."  I was on the HP support forum, tried to uninstall and reinstall the driver, even tried to download the driver on the net, you run printing HP & scan doctor, tried all disconnect them reconnect restart options, all without success.  The functions of printer normally with this laptop and the printer function scanner AND correctly on other two laptops running Windows XP Pro.  Which makes me suspect that this is a problem Windows 7 Pro.  Could this be just?

  My apologies if this isn't the right forum for my problem.  Please redirect me if this is the case.

  Any real help will be GREATLY appreciated.  It's so frustrating!

  Thank you.

  Hello

  1. you have any security program installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to disable any anti-virus program and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can also run the printer Troubleshooter and check if it helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 3:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  See also:

  "The computer cannot communicate with the scanning device" Error message in Windows Vista

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=NL&DocName=c00852756&LC=en

  I can't scan in Windows using the HP software

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=4323659

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• Cyan is not printing on HP Officejet Pro 8500 has more - Air bubbles in the ink tubes

  Hi all

  I know why cyan is not printing.  It is because of the following:

  Ago, I ran out of ink cyan printing ("please replace cyan before continuing").  I live in a remote area and was not able to buy a replacement cyan cartridge, so I read on a hack on the Internet, that was to fool the printer into thinking that the cyan cartridge remained inside ink (just basically restricting the measure gauge so that it read the Full cartridge).  I did it because I had a print document that requires only the black ink, so I knew that this wouldn't be a problem.  Then life happened and I completely forgot my little shortcut, and my wife printed a number of color photos.  I finally had time to cartridges, and I now understood that cyan is not print at all.  I have now opened up the printer and realize that the cyan ink tube is full of bubbles...

  I tried to fix this by printing A4 pages that are for the most part, cyan, but without success.  I even tried to put pressure on the ink cartridge cyan in order to flood the cyan ink tubes - also, it does not work.  I read somewhere that there is a way to actually get some printers to pump tubes with ink, is - it possible on the Officejet Pro 8500 has more?

  Of course, I did all the tools that are pre-set to the arsenal of 8500, but still no luck.

  I know I'm in the situation I am purely because I don't use the device as intended, and people that no one is to blame but me, but I'd appreciate any help you could provide.

  Thank you

  John

  John, looks like you have a problem with the ink system. Unfortunately, what it looks like happened here, is that your ink nozzle, tubing and probably-print head have put dry for cyan. Work around is pretty neat, but it really is only recommended for a very temporary solution. If the ink has dried in the piping, but elsewhere in the printer then can be a decent chance that this printer will be not likely reprint the cyan. You can try to run the automatic cleaning process (up to three times I would say) via the Tools menu in the Setup (the wrench).

  In addition, I'm not sure that this will be a question that has a simple resolution. Apologies, John.

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• Satellite C750-A103 made a lot of noise - problem with the cooling system

  My toshiba machine made a lot of noise... like a plane. And it gives me the message "a problem with your cooling system has been the detection.

  Turn off immediately and come back for the service "."
  What should I do? It has been recently formatted, also?

  + The message was edited: mode number + added

  You did not provide details on your laptop model and system that is installed on the laptop.

  Even his I don't know how old is the laptop, but according to this short message, it looks like there is a problem with the cooling system.

  Probably notebooks cooling fan doesn t work properly and the unit cannot be cooled as it should this can lead to cell damage through an internal temperature longer.

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• OfficeJet Pro 6830 e: Message 'there is a problem with the printhead"

  How can I fix there is a problem with the print head.

  Hello

  If I could get help on the questions of my print head on my e-ALL-in-one-HP OfficeJet Pro 6830 series. I found information on the HP site that there are problems with this series and there may be given replacement printers. idk

• Officeject Pro 8600 Plus: Officejet Pro 8600 will copy in color but not print in color

  I have an Officejet Pro 8600 Plus able to make copies of color, but it will not print in color of my office.  My printer uses the version of the firmware CLP1CN1416AR.  When I go to print a document in color, I go to the properties of the printer and then advanced and set print in grayscale on Off, but I get still only prints in grayscale.

  Thanks for your suggestions Zac.

  1. we have tried using several different programs (paint, Microsoft Word, Adobe Acrobat, a test of the printer properties page, etc.), but all printed only in grayscale.

  2. it's connected via Ethernet cable to our Wi - Fi wireless router and then to our laptop.

  3. the ink levels are all above 40%.

  I had already tried electric bike on the printer several times as well as the computer, which did not help.  I tried to change the printer settings default to print in gray and then changed them back to the color, but that did not help either.  I tried resetting the printer, mentioned in another thread (unplug the power cord at the back of the printer, while he was conducting, then unplug the power transformer in the decision-making, hold button power printer for 60 seconds, then reconnect the), but which did not help either.  Finally, I uninstalled the Windows printer and reinstalled a couple of times, and finally, it started working properly again, so, apparently, there was a problem with the driver who eventually got cleared up by reinstalling the printer/software/drivers.

  Josh

• OfficeJet Pro 8600 Premium head alignment all-in-one printer

  I have a new officejet Pro 8600; everytime I try to align the print head prints four monotube black red lines then there is a noise very loud and I gives me a paper jam error. I checked and double-checked and I'm sure that I removed all packaging. The printer will be page nt a pri at the time very well. But I can't use the feature in advance such as printing on both sides of the paper.

  Any suggestions would be helpful. I can not even find the 800 number in the manual.

  Thank you in advance.

  Hi mrdlf,

  I noticed your post on your Officejet Pro 8600 not align correctly and indicating a paper jam error. I'll make some suggestions for you and publish the links below. Links are to the troubleshooting guides that I hope will help you with this problem.

  I'll also post details of HP. If the steps do not help, I suggest to call the HP Technical Support to see if they have other options for you.

  Paper jam error message

  An "alignment failed" Error Message appears on the all-in-one

  Contact HP worldwide

  Good luck to you,

• HP Officejet Pro 8600 more indicates 'missing or does not print head ". I followed HP 4 instruct. Help

  HP Officejet Pro 8600 more indicates 'missing or does not print head ". I did 4 HP instructions and now I'm #4: contact HP. I cleaned the heads, replaced the 4 cartridges, removed and replaced the unit restarted, everything. Now what?

  There is a document with measures to help address the missing or condition is not the print head.  This document can be found here.

  From your post, I understand that you did some the most of these steps, but run Solution 4: replace the print head.

  If you are still in warranty, HP can replace the printer/printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082