HP Officejet Pro 8600 won't allow selection of the type of encryption WPA2_PSK.

Similar Questions

• my hp officejet pro 8600 won't print from my ipad.

  my hp officejet pro 8600 won't print from my ipad. ?

  Hello

  Yes.  Try following the instructions here http://support.hp.com/us-en/document/c02623193
  If this does not help, let me know and I'll see what I can do.

• HP Officejet Pro 8600 won't copy

  My new HP Officejet Pro 8600 will not copy.  When I hit print I get an error "scanner failure".

  I called the HP support by phone as suggested, and they had me unplug the printer, then hold the power button in during 15 seconds, everything disconnected in order to "drain the power."  Once I have it plugged it back in and he began to copy correctly turned on!  Hope this helps someone else with the same question.

• HP Officejet Pro 8600 won't stop printing.

  My HP Officejet Pro 8600 bought aproximatelly 4 months after doing some copies of web pages today all a süden after extinction of the last impression continues on its own to spew more than 25 pages of text without a showdown on his own pages.  The printer worked perfectly so far.

  My lap top is a Windows 7 operating system and 64-bit.

  I was not able to stop it until I disabled the printerl.  Can you help me please.  Thank you very much.

  Hi Jabzi, thank you very much for your answer.

  Your answer was correct is an ACCEPTABLE SOLUTION.

  Also I forgot to give a KUDOS then please mark it for me since I was not able to return to the page before this one.

• OfficeJet Pro 8600 Wireless Configuration - print is in the queue, then disappears. Do not print

  I just got the Officejet Pro 8600 as a gift and burden of implementing software and it on my wireless network.  When I try to print an e-mail or a coupon, the command changes to the printer and indicates in the queue. Then after a few seconds, the print queue (work) disappears without printing the document.  This command goes to the HP ePrint feature or the Officejet Pro 8600 network?  It shows the HP ePrint as being on USB.

  I have run all the Diagnostics, downloaded all the new software, software packages and updates.  I spend several hours trying to get to the printer.

  Thanks for any help you can provide.

  Hi @bksechols

  Welcome to the Forums of HP's Support.  I understand that when you send a print job to your printer Officejet 8600 to printing to the queue, then disappears without the printing of the print job.

  To help you, you please provide additional information?

  • How is the printer connected (USB cable, ethernet or wireless)?
  • What operating system do you use?
  • All print jobs fail? If Yes and you are using a Windows operating system, please try printing HP and Scan Doctor for Windows.  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems.
  • When you send a print job are sending the address of electronic mail of the ePrint printer? If so please check The HP ePrint, print not print job if you send the print job using the print command, please see the document of your HP printer print jobs are stuck in the print queue .

  I look forward to hear from you.

• HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

  Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

  Help! PLEASE, I BEG YOU!

  Lacey!

  Hi @L2thaJ,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

  Is the other computer Windows 10 institutions, who works for printing on tray 1?

  It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

  You are able to print to Tray 1, when printing from MS Word or Notepad?

  Please ensure that you use the latest printer driver for your printer.

  Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• 4.3 "touchscreen of the Officejet Pro 8600 Premium could be established in the Spanish language? Help me!

  I just sent an e-mail to HP support, but unfortunately they never told me anything. I need to buy a printer for trade muy and I would like to acquire the Officejet Pro 8600 Premium, but I don't know if his screen 4.3 "touchscreen could be implemented in the Spanish language. So my question is: can the Officejet Pro 8600 Premium touch screen set up in the Spanish language? Please, ¡Anyone help me!

  Yes, you can.

  The 8600 Officejet Pro may be installed in different languages.

  I provide and example of this:

  • 
  • This screenshot is when you select the paper size for copying:

  And another example:

  • 
  • It is the main window of the façade.

  * Don't forget to click on the stars KUDOS say thank you

  * also click on the Solution button if your question is answered.

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• How can I stop my Officejet Pro 8600 one beep every hour on the hour...

  HP Officejet Pro 8600 works very well but the hourly beep is very annoying.

  Hello The_Majar,

  Welcome to the HP Forums!

  I understand that your Officejet 8600 beeps every hour. I will do my best to help you! Please make sure that the printer is connected to a live wall, not a surge protector. I recommend this step, that the printer can not get enough power.

  Then, try to reset the printer for more information, then 60 seconds.

  Please post your results, I'll be looking forward to hear from you.

• HP Officejet Pro 8600 Plus: Streak black left on the original after copying Document

  Product: HP Officejet Pro 8600 more N911g, only one month, bought at HP online

  Problem: Each document that I put into the automatic document feeder coming out with a black streak in the center of the paper. The copy is a perfect quality, while the original is left with the brand. I don't see a roll of Center when you open the service on the ADF Panel, but I'm probably wrong. What should I do?

  If the line appears on the original after running through the ADF? The line does not appear on the copy image?

  * If this is the case, then I advise you contact HP Technical Support on this product because it is very new, as mentioned above. HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

• HP OfficeJet Pro 8600 N911a, no PC Interface to the printer

  Win 7 Home Premium, 32-bit and 64-bit PCs, wireless connection to the printer OfficeJet Pro 8600 N911a.

  When clicking on the icon of the desktop printer, or to access the HP program in the start menu, MS Notepad opens the interface instead of the interface coding. It's a constant problem since the installation of the software in November 2012. The software has been installed on all three 3 PCs with the disc that came with the printer. All three 3 PCs suffer the same problem of no interface, only Noptpad with the code.

  I uninstalled the drivers and firmware (using Revo) completely and reinstalled from the HP Support download site. The problem remains.

  The interface of Scan function works perfectly in the start menu.

  Other than that, the printer works fine when access to it to print from the sites, as well as the printer works perfectly with all functions when using the control panel touchscreen printer.

  Any suggestions or help appreciated.

  Bob

  Hi Bobhist,

  I understand that you have a 8600 Officejet which is not able to open the wizard in the printer on 3 different computers. I'm sorry to hear what is happening, but I'd be happy to help you!

  I would recommend you have a look through this HP Printer Wizard opens with an error in Script or in Notepad and you should then be able to use everything as planned.

  Hope this helps, have a nice week end

• HP Officejet Pro 8600. How do I close the tray to legal paper

  I have a HP Officejet Pro 8600.  I extended the papertray out for legal size paper, and no I can't go up in the.  The book no such n you how to proceed.  Can anyone help please?

  Hi horsewhisperer8,

  You will need to press the blue button in the red square in the image below to readjust the size of paper in the tray.

  

• N911a HP Officejet Pro 8600 error scanner cannot communicate with the computer.

  Original title: is anyone has the sweep of HP Officejet Pro 8600 n911a problems when you use Windows 7 Pro?

  Just bought this laptop of HP Pavilion dv6-7138us, and had the updated operating system upgraded to Windows 7 Pro, directed by Office Depot until I take possession.  The all-in-one HP Officejet Pro 8600 n911a (bought a few months ago) will be analyzed to this laptop.  I can't access "managing the scan of the computer."  When I try to open the scanner of the icon, the message begins with "scanner cannot communicate with the computer."  I was on the HP support forum, tried to uninstall and reinstall the driver, even tried to download the driver on the net, you run printing HP & scan doctor, tried all disconnect them reconnect restart options, all without success.  The functions of printer normally with this laptop and the printer function scanner AND correctly on other two laptops running Windows XP Pro.  Which makes me suspect that this is a problem Windows 7 Pro.  Could this be just?

  My apologies if this isn't the right forum for my problem.  Please redirect me if this is the case.

  Any real help will be GREATLY appreciated.  It's so frustrating!

  Thank you.

  Hello

  1. you have any security program installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to disable any anti-virus program and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can also run the printer Troubleshooter and check if it helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 3:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  See also:

  "The computer cannot communicate with the scanning device" Error message in Windows Vista

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=NL&DocName=c00852756&LC=en

  I can't scan in Windows using the HP software

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=4323659

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• OfficeJet Pro 8600: OfficeJet Pro 8600 is no longer connects to the network

  I serve my 8600 OfficeJet Pro on a local network with a wireless connection to a router. Now the printer will not connect to the router.

  I can ping the printer to the router, then the wireless hardware works. I can print when it is connected with a USB cable, scanning to a USB key, so printing/scanning equipment works.

  WiFi Protected setup does not work. When prompted I press the button on the router for 3 seconds, the printer who sees because I get a 'connection to the network"roundy roundy, but it times out instead to complete the connection.

  The WiFi connection wizard does not work. Analysis of available networks found my network, but when I enter the password, I get a "trying to connect to the Network" roundy-roundy, followed of a message "Wireless invalid password (WPA) has come."

  The printed report assures me that's the wireless works, and that the WPA password that I entered the printer does not match the configuration in the wireless router. It is wrong - it's the same password using my computer and the computer has no problem connecting. I changed the password on the router (and the computer) and tried the new password on the printer, but that does not work either.

  Is there a way to erase the memory of the printer and restore the default settings that can help?

  Temporarily remove the password and all the safety devices on the router. Save the settings. Now try to connect the printer to your SSID not guaranteed without password. Are you successful? If so, go back and add a WPA2-AES encryption with your password and try to log in again. Do not use WPS.