HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

Similar Questions

• How do we install a hp p [hotosmart C6280 all in one printer under windows 7 with dial-up modem]

  How to install a printer HP Photosmart C6280 on my HP windopws 7?  I have dial-up modem. I have the CD but it's for windows 2000; XP and Vista. Windows 7 does not support it. Could someone help me with the steps to get windows 7 to accept the printer?

  You can order a CD or download the driver on this linkHP.

• Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

  I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

  What happens and how can I solve this problem?

  Hi TM1997,

  Thanks for the reply!

  Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

  Have a great weekend!

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8620 e-all-in-one printer windows 8

  Printer e-all-in-one-HP Officejet Pro 8620 Windows 8.

  wireless printer is. printing from iphone is OK

  Since my PC win 8 not sending a file to filesgo-printer - printer not respongding - no message.

  I have install new printer 8620 on 8600 series of drivers printer or printing only from my PC

  How can I fix the thanks of printing problems

  Hi @yosiwajcenberg , welcome to the forums there.

  I read your post on your Officejet 8620 do not print for you, on your system Windows 8. I suggest you try the following steps.

  1. go to your control panel and uninstall your printer.
  2. hold your key to Windows and the R key on your keyboard to invite the run dialogue box.
  3. Type "coil" and press enter or click OK.
  4. Select and open the drivers folder, select the x 64 folder if you have a 64-bit operating system or the w32x86 if you have a 32-bit operating system.
  5 open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6 reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  I hope that helps!

  Have a nice day

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

  Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

  Hello dhe8011,

  Welcome to the HP Forums!

  I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

  Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

  Let me know if this document solved your problem or not.

  Impatience on your part.

• Pages come out White HP Officejet 6500 has e-all-in-one printer.

  I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
  Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

  Thank you
  )

  Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

  Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

  Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

  Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

• HP Officejet Pro 8600 e-all-in-one printer - N911a user manual

  I have a HP Officejet Pro 8600 - N911a e-all-in-one printer and can't locate a manual for it.  Is there one online? Thank you...

  Hello sforcer,

  Here is the User Guide:
  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03026243-3.PDF

  You will be able to find several other manuals from the link following, if the user's guide is not specific enough.
  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults/?sp4ts.Oid=4322914

  I would like to know how it works for you.

• HP Office Pro 8600 e all in one printer wizard disappeared

  I am running Windows 7, Office Pro 8600 e-all in one

  Out of the blue, two laptops in the House lost priner Assistant and all of its features (fax to the folder, etc.).

  Windows has had some updates for a few weeks so I can only assume it follows from there.

  For two laptops, I uninstalled and reinstalled the CD and the software of latest driver on the site of hp without success.

  I ran HP print and scan doctor without success.

  Any help would be greatly appreciated... I am at a loss.

  Hello

  On the start menu click programs and select HP, then select the HP Officejet Pro 8600 folder and proceed with the uninstall.

  Then download and install the following software, do not use older since the CD or software programs you can registered on the HP site in the past as the problem will remain while any previous software used:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4158&product=4323659&sw_lang=

  Once you have finished, restart your PC and click the HP Officejet Pro 8600, located on your desktop.

  Please let me know the results,

  Shlomi

• Is the Officejet 7612 A3 e-all-in-one compatible with windows 10

  Hi, I am looking to buy the Officejet 7612 A3 e-all-in-one and I was wondering if it is compatible with Windows 10. Thanks for your help

  Yes

• Problems with my laptop and my HP C7280 All in One Printer

  I have a network problem which gives me fits. I have a HP Wireless HP C7280 All in One Printer in one of my rooms where my desktop computer. My son and I have all two laptops that we have been able to use wireless network mode to print on the 7280. One day that my laptop (HP dv5-1002nr) even though it shows I am connected to the IP address of the printer, no longer cause the 7280 printing. All parameters show that I am connected, but when I print and go to device settings it shows the document is waiting and then print, but nothing prints from the printer itself.

  I checked all the network settings, reset everything again, downloaded the latest drivers and all without success. Today, my son has had 2 other laptops and was able to print wireless to the 7280 and it was also able to print wireless from the desktop in the same room as the printer, so we know that the issue is not with the printer. Some of these laptops are also HPs.

  At first I thought that maybe there was a problem with my LAN driver but check that and everything appears to be functional and up-to-date. What is strange, is that I can email this cell phone to my modem wireless of course work in this regard. However, no matter what we did to make sure that all our drivers and settings are correct, we are still unable to make the printer print.

  Anyone have any ideas because we are totally frustrated.

  If it looks like your question:

  After you install the product on a network, you turn off the computer, and then, and the product loses functionality. The product is no longer prints and disappears from the icon of the product in the menu devices and printers in Windows 7 (64-bit).

  Try this fix:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-89191-1&LC=en&DLC=en&CC=US&OS=4063&Product=4022343&sw_lang=

• Large Format-Officejet 7500 a e-All-in-One Printer - E910a help

  I'm considering the purchase of a large e-all-in-one printer Officejet 7500 a - E910a printer for my business Format. I need to know if this printer print borderless on a 8.5 "X 14" brochure. Thank you.

  I pulled up the specifications of the eAiO Officejet 7500 a Wide Format, found here, to see what this printer could handle for borderless paper sizes.

  The printer can print 8.5x11, A4, B5, A5, A6, 5 x 7, 11 x 14, 12 x 12, 11 x 17, 13 x 19, A3, A3 + and 5.1x7 in printing without margins, but the 8.5x14 does not provide this option.

  I hope this helps.

• How do you resize a copy on HP Officejet Pro 8600 e-all-in-one printer - N911a

  In other forums, they tell you how to resize a copy, but I can't find what they need on my printer. I think my printer is different and does not have the fetures that talk about these other bodies. I want to know if it is even possible to resize copies on my particular model: printer e-all-in-one HP Officejet Pro 8600 - N911a

  Hello again modell7,

  I am pleased to hear that we were able to get this problem solved for you.

  Thanks for the kind words as well.

  If this isn't a lot of difficulties, please click accept as the Solution to the bottom of my post so that others can take advantage of these troubleshooting steps.

  It has been a pleasure to work with you and please feel free to write me again at any time with any other questions or concerns you may have.

  Have a great day.

  See you soon,.

• OfficeJet Pro 8620:8620 all in one printer color printing incorrect, even if the quality is good on tests

  My printer is only about a year and I had no problem with him until more recently. I only use hp ink cartridges. It prints color orange when I want to print the colors pink and Red/pink when I want to print Brown. Most of the other colors print normally. I cleaned the print head, which does not help at all and made a print quality test, each test to come out totally fine. Colors are not dimmed, there are no missing lines or anything like that, it's just printing wrong colors from time to time, as on some documents. Any suggestions?

  Hi @mcorinn,

  Welcome to the Forums of HP Support!

  I see that you experience problems printing some documents with your HP Officejet Pro 8620 printer in Mac OS X 10.6. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. There could be corruption in the files/application on the Mac or a problem with the printer driver. If the 'print quality test' report print correctly, this is not a hardware problem.

  Are you able to print from TextEdit? What were the results?

  If some documents are the problem, they could be corrupted.

  What application you are printing from?

  Try to create a new document with the color to see if it prints correctly. What were the results?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!