HP Officejet Pro 8610: Question of PARANOID GUY
Hi, so I recently set up my 8610 and used the wireless option. I want only ME as the only user of this printer wireless. When I install, however, he only asked for the IP address of the printer, which is located in my computer control panel (when scanning for devices to add) addition to the Panel of the printer itself. So my question is, can anyone with any WiFi access my printer and print stuff on it, given that they have the right drivers? If this is not the case, what exactly is the security feature because I seem to detect a. Only computers that connect to the specific wifi that uses the printer can access? What exactly are the other limits people to just use?
I also see the direct wireless option, which is an IMPRESSIVE safety feature, but it seems that I have to cut my current WiFi to be able to print it is out of the picture.
I use that laptop / no need to print from mobile or whatnot. Thank you very much
The HP wireless Direct inded option require to connect network printer.
The HP printer will be available for any device connected to the same network as the printer, assuming that your wireless network is protected by word - that limit other users access to the printer, as they can not connect to your wireless network.
Tags: HP Printers
I am aware of both a pages facing two options on back page. Now, I'm trying to figure out if I can copy two pages in front of two pages by using the Officejet pro 8610.
The HP Officejet 8610 does not support automatic double-sided copy of a centre but only duplex printing.
The duplex is only available model 8620 or 8630.
You can use the HP scanner software to scan document manual duplex print it to work around the problem.
You can find the specifications of the product below:
HP Officejet Pro 8610
HP Envy laptop
8.1 Windows X 64
Printer will not print back of the pdf booklet by choosing the best quality.
Get the message "Cancel printing" on printer when trying to print the second side.
kicks then paper.
In addition, printer does not multi make page print job when printing on both sides Word 2013
document. Stops at random page number, get message «Cancellation of print» print
Complete features uninstalled and reinstalled software by following the instructions
by HP Support Forum's message dated 23/09/2014. Problem
There are still.
So happy to hear that everything is in place and functional for again you!
Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.
Better luck in the future and have a great day!
After an update of Windows 10/diversion, my HP Officejet Pro 8610 is more listed in printers. I tried to reinstall everything, restarting, disconnect, find printer can't find anything (the printer is right next to me).
Thank you for the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.
For the best experience on HP forum, see our Guide to HP Forums to learn more.
The printer is not detected after Windows update. Is this fair?
I would definitely help.
First, uninstall the old drivers installed in your PC by following the steps below.
- Right click on "Start" and select "programs and features".
- Find the option that the printer name and then click "Uninstall" on the top of the window.
Restart the PC and download the latest drivers for the printer from the link below and install the printer. It should work.
I hope this helps. Let me know to learn more
Happy to help you. I work for HP
Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "
My printer has ceased to recognize its ink cartridges. In a first stage, the problem happened occasionally and could be fixed by installing and reinstalling the cartridges or just wait a few days, but now it is continuous.
When I turn on the printer, it immediately gives me an error (without code), saying that it cannot find the cartridges. All four are marked on the screen as not found. I followed the instructions of troubleshooting here: http://support.hp.com/us-en/document/c04090902
The cartridges are genuine, they are the ones that came with the printer. I removed the, checked the contacts of the four. They look damaged or dirty, but used a cloth to clean all anyway. Put back them, did not help. Checked the latch, it was in the correct position. I even tried the restart without result.
I tried to replace the cartridge with a new one (again, product HP genuine), but does not replace the printer either. And because all cartridges have failed at the same time, I can hardly belive the problem lies in them.
I come from Finland, and I've not found a phone number, I could ask for help. Does one exist even for my country?
Welcome to the Forums of HP Support! I hope you enjoy your stay here.
I see that your Officejet Pro 8610 e-all-in-one printer does not recognize the cartridges. I could help you with that, but it seems that you have already found the HP document that will guide you in troubleshooting. Instead, you can contact HP (in Finland) support by clicking this link.
I hope you get your sorted question and I hope you have a great weekend!
If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.
Everything tonight. We just purchased two HP Officejet Pro 8610 and has set up in the office, however, we found that even though we have activated the auto answer feature, or machine automatically answers. Instead, they always ask a manual "Yes, go ahead and answer this question" a key that does not work for us because we have not often the people around these machines.
Running a Test Fax report I got the next to a print to...
Fax hardware Test: PASS
Fax machine connected to the telephone wall jack Active: PASS
Telephone cable connected to the appropriate Port on the Fax: PASS
Using the phone cord with the Fax Type: PASS
Tone detection: PASS
Fax Line Condition Test: PASS
Auto answer: on
Rings before answer: 2
Fax paper size: letter
Tone or pulse composition: composition of tone
Volume Fax: soft
Distinctive ring: simple Cycles
Availability of recomposition: Redial
No response recompose: no reminder
Automatic reduction: on
Backup Fax reception: on
Error Correction mode: on
Fax speed: medium (14400)
Fax transfer: Off
Communication error Redial: Redial
Our header and the number have also been defined. Right now I guess I missed something in the user manual, as is the case with the machines. Maybe someone knows of what I missed?
I think it's related to distinctive ring setting. Have you tried to put the distinctive ring for all the rings feature and see if the printer can automatically respond?
If you are using distinctive ring service, please refer to the user manual on the distinctive ring setting.
If you don't use a distinctive ring service, make sure that the Distinctive Ring
function of the printer is set to all rings.
Hope this can help.
Dear HP guys!
I'm officially confirm that I used compatible cartridges for my MFS and don't need no guarantee for this. Please just return old version of the software for my device so that I can use it. I bought this unit for my private needs and according to the Russian law, I am free in what to use with it.
p.s. I always buy Komus - your recommended non compatible cartridges.
Future prospects for the quick response.
My 8610 rose like a Phoenix from the ashes)))
Click on the link below (PS any updates from HP)
... the truth is always on the side of cheating on her...
just started using my officejet pro 8610. love it but I can't seem to aline sheets of labels when I print multiples. When I print 3 copies it will make good on the 2 / 3. I have the tray loaded with about 50 sheets of paper of reg and then ask my sheets of labels above. Have I not it overloaded or what.
Welcome to the HP Forums.
I see that you experience a problem when you attempt to print more than 3 pages of paper for labels at the same time.
You said that you have plain paper in the status bar, as well as the label paper. Please delete. Use just the label paper when you print labels. It would be the same scenario that you were printing photos and using photo paper. Remove all of the regular paper.
If you still have questions or if you have any other questions, feel free to write me again.
See you soon,.
HP OfficeJet Pro all-in-One 8610 print intermittently
This is a request for additional assistance from HP, Apple and AT & T Community Forums
Machines and affected software:
Printer HP OfficeJet Pro 8610 e - All - In - One.
Serial number: CN4CNE3463
Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)
iMac 21.5 inch late 2009 (daily use)
Serial number: W89415S5PC
OS X El Capitan: Version 10.11.6
MacBook Pro 13.5 inch late 2009 (occasional use)
Serial number: W8942UW766D
OS X El Capitan: Version 10.11.6
MacBook Air 13.5 inches mid 2012 (daily use)
Serial number: C02HX3ZADRVC
OS X El Capitan: Version 10.11.6
Wireless router: AT & T U-verse ARRIS NVG589
more AT & T Wireless Access Point VEN501 device
Wireless Router Range Extender: Linksys RE6500
Multipoint unresolved printing problem:
HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.
09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:
(1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.
(2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.
(3) tried to scan the printer for iMac's wireless: would not scan.
(4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.
(5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 . The results have been mixed:
(a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.
(b) the iMac to the router and wireless router for printer: test page will not print.
08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.
AT & T: recommended
(1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.
(2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.
AT & T told me that the printer should work fine now.
Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:
Wireless to the router for printer
Wireless to the router and Ethernet cable for printer
Ethernet cable to the router and wireless to a printer
Ethernet cable for printer
Another experiment on 11/09/16 led to erratic printing depends on the original machine:
1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).
a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)
b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria
Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.
2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.
I'm sorely need a remedy to this overall situation.
- What is originally intermittently, the HP printer?
- What is originally a wireless printing and Ethernet to vary?
- What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
- The question one demanding a new router?
- DOE the question indicates the need to uninstall the printer and then perform a reinstall?
- With all machine software updates could be software problems cross machine?
Link to the firmware.
I have a question about printing and adjust it.
I have an image that I want to print, and it is great.
I have 2 printers an epson and an officejet 8610.
When I print on my Epson printer, the image is shrunk and print everything on one page.
But each big image that I try to print on the 8610, it prints some parts of the image to other pages.
I'm no shrink to adjust option in the settings of the printer and my programs are already developed shrint to print.
So, how to activate or find the shrink to fit on the 8610 printer?
I have instant ink if I want to print on the 8610, but since it prints on several pages, it must continue to use my Epson currently.
Your help would be greatly appreciated.
Thanks in advance
Thanks for joining the Forums of HP Support with your print request.
I understand that you use a HP Officejet Pro 8610 e-all-in-one printer with a Windows 8.1 computer and you try to print a large image file, but there is no scale to move page or reduced to fit option so the image is printed on several pages. I would like to help with that.What program you are trying to print from?
How better to analyze photos w OfficeJet Pro 8610
I saw on YouTube there is a possibility to configure settings on app scan to detect the sizes photo placed on the glass and also scan several photos. I can't find these settings when I open my scanning application
Note: downloaded the web driver and have not installed the disk due to the lack of hard drive on my MacBook Pro.
found the answer to my own question - Apple - printers scanner system preferences control settings - NOT of HP scanning App
Took 2 hours but bat pay $ 99 for the one-time support of HP
HI, I have the HP Officejet Pro 8610, I downloaded the HP all in one application.
I can print the pictures very well, but no matter what size option, I selected (4 x 6, 3 x 5 ets) - still, it prints a picture 8 x 10 - can someone help or give me the sense that the impression of small photos?
Welcome to the HP Support Forums!
I understand that you have some problems with small photo printing from the application of all-in-one remote control for your Officejet Pro 8610 e-all-in-one printer. I can help with that.
What is happening is the size option you are using is select the paper size in the printer, not the size of the photo. If you want to print photos of 3 X 5 or 4 X 6 then you will need to reduce the size of the image before you load the all-in-One Remote App or load 3 X 5 or 4 X 6 photo paper in the printer. A final alternative is to print from a Windows PC or a Mac instead, that would give you much more control over how pages are printed.
Please let me know if this helps you with your printing. If this answers your question or solves your question then click on accept solution and if you appreciate my help then please click the thumbs up icon. You will find the two below my post. If not, have a great day!
The printer driver installation fails with:
Call to DrierPackageINstall returned error 1627 for package
"C:\Program HP HP Officejet Pro 8610\DriverStore\Yeti\hpvyt13.inf"
Tried to install base drivers and a full suite as a user and administrator. Also tried a clean boot (close unnecessary services and restart). I went to look for the file in question, but it does not appear to exist (there is no HP directory in Program Files).
This can happen for several reasons, most common duration to a problem with the registry permissions.
I would suggest trying the following tool, it is a 3rd party utility that analyze and repair registry permissions, and so you can use it at your own risk (I used it several times without any problems):
Click the Start button and let a few minutes (it may take some time, about 5-10 minutes), the journal stated: "" once it ends.
Then try to reinstall the HP software and check for the difference.
If the same continues I suggest contacting HP sopport to continue such troubleshooting.
You can find the detais contact for your region below:
Hope that helps,
I bought a HP Officejet Pro 8610 a few months ago to use mainly for scanning and copying for a home business. I could not get the printer to print a sheet of paper without deformation of paper and printing things on an angle. I use paper nine of a ream of fees. I tried to reload the paper, using less paper in the tray, using more paper in the tray, etc. My main Canon printer has recently died, and now I have to be able to print business documents and controls on my HP printer. Any suggestions?
Welcome to the Community Forum of HP.
A few ideas
The printer may need to be aligned after you do not use as a regular printer for a long time.
Down 2/3 of the way through the document, find "step 4: calibrate the line break"-you want to complete it!
Belle is not usable equal
The HP 8610 can care for the moisture content of the paper, or maybe the printer doesn't like the weight of the paper you are trying to use. This is the simpler, more straightforward answer.
Assuming that you selected correctly before the type of media in the printing preferences for the printer knows what kind of paper to expect and how to react - the printer is maybe not able to manage this particular test. If this is the case, and regardless of the perception of the quality of the paper, there is no way to force the printer to accept this document. It is not a question of "bad paper" - it is a question of how the printer sensors respond to the book.
Beautiful paper is not always equal paper which is printed on each printer. HP printers are not the only picky ones in the world. All printers of high quality can respond to the report in this way. You don't have to use paper HP, is told by the way. Try different papers. Place this paper somewhere cool and dry to store and try again later.
If you have not already done so, you can set the media type in printing preferences.
Setting the media Type tells the printer what kind of paper be expected; the printer sets the reels and the spring tension to pull the paper into the printer correctly.
The case of the order of the missing pages
You mentioned something in passing that might be important:
You will use your OfficeJet 8610 to print checks.
If printing of cheques requires a feature 'Page Order' of the printer, you may be interested in the following:
See the entitled subject
- Page order - front to back / back to front
- Option 1: Use the OfficeJet Pro 8600 driver
Click on the thumbs-up Kudos to say thank you!
And... Click on accept as Solution when my answer provides a fix or a workaround!
I am happy to provide assistance on behalf of HP. I do not work for HP.
When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.
I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds. Also this operation and in him plugging in several power strips and directly into the wall outlet.
I was able to restore the default settings at one time. This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.
Welcome to the Forums of HP Support!
I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.
I take a flashlight and look inside the obstruction.
Use this guide to check obstructions:
I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.
If you have completed all the above steps and your product still has a problem, service the product.
If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.
Contact HP for service in all countries except Asia-Pacific.
What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on options contact HP - click Get phone number
File number and phone number are displayed.
Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
Maybe you are looking for
Just upgraded to El Capitan. When I select an Album for a slide show, only the first frame appears, with the title of the album. I tried all variants of projections, but nothing works!
Although my BIOS reports 2G of memory, control > system reports only 1 G. Have any thoughts as to why windows does not recognize the other 1 G memory. I have HP Pavilion Media Center TV m7480n.
The vi's drivers for a PCI based receiver RF called winradio card. The library is accessible here: http://www.winradio.com/home/downloadlabview.htm. I thank you for your time and any service, you can provide. Andy P.
original title: repossitioning icons I put all my icons on the desktop I would like it but on a restart they will jump to another applicant. How can I keep them I would like them?
My cd rom is not reading the disc, I put in and when I goto the cpu page it listed in cd drive f: VZaccess Manager then how do I get it turned back on to my cpu cd player? Also, I can't my cpu to read my printer or scanner when I plug it in it he rec