HP Officejet Pro 8610: The 8610 Pro Officejet will analyse to 14.04 Ubuntu?

Similar Questions

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• HP Officejet Pro 8620: HP Officejet Pro 8620Print will not print oversized envelopes

  I thought I had followed the instructions allegedly simple re plug my new printer HP Officejet Pro 8620 in turn. Something to do with the connection via ethernet? I plugged it with a money USB cord.

  Then, when I tried to print something printable HP, the site does not recognize or find my printer.

  I also can't seem to print envelopes of various sizes. The instructions to keep your printer drivers on the evolution of the saying.

  Can you please help? The saleswoman of Staples said it would be easy. HAH!

  Thank you for your time and let me ride my rants. I enjoy your site and it.

  Hello

  HP pads are only available in the network connection, and no USB connection.

  To connect the printer to the network yoru connect it to your router wirelessly or through an Ethernet cable to any of the router LAN port, then you can activate printable HP.

  You must reconfigure the printer by opening the HP Officejet Pro 8620 software, and then click the utilities tab.

  Click Printer Setup and software and follow the steps to connect to a network printer.

  To set a custom size support size envelope follow these steps to configure the size within the confiugration forms your system, then the size configured support will be available in the print driver.

  You can follow these steps to set a medium size custo:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5367613/document/c03890386/

  Note that the printer supports a size order of 76 to 216 mm (3.0 to 8.5 inches) wide and 127 to 356 mm (5.0 to 14.0 inches) long. any value higher or lower is not supported and is not listed by the print driver.

  Shlomi

• HP Officejet Pro 8500 will not send or receive faxes

  HP Officejet Pro 8500 will not send or receive faxes. 'Run Test Fax' indicates that everything passes.

  Then see HP support pages for your model, its their equipment & the fax is independent of the victory

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• Adobe Premiere Pro CS6 will work on the Nvidia gts 450 graphics card? Otherwise, what is the alternative?

  Hello everyone, I wanted to know if Adobe Premiere Pro CS6 will work on Nvidia gts 450 graphics card? Otherwise, what is the alternative?

  If your nVidia card at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a 'support for the cards' file - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

• First Pro CC blocks when you scroll through the sequence in the timeline - Audio Waveform will Virgin first

  The description is in the title: first Pro CC blocks when you scroll through the sequence in the timeline - Audio Waveform will Virgin first.

  Just started today, will not stop now blocks after a minute or two, and he always does when I scroll through the timeline of a sequence.  First of all, the audio waveform becomes empty.

  What is going on?

  Date/time:	2014-10-22 12:16:16.078-0400
  OS version:	Mac OS X 10.9.5 (13F34)

  Report Version: 11

  Anonymous UUID: E1BCDCD7-6284-3012-9151-FF85491060DA

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGBUS)

  Exception codes: KERN_PROTECTION_FAILURE at 0x000000011d74b000

  VM regions near 0x11d74b000:

  	VM_ALLOCATE	000000011d 748000-000000011d74b000 [12K] rw-/ rwx SM = PRV
  -> BATTERY CARE	[000000011d74b000-000000011d74c000	4 K]-/ rwx SM ZERO battery guard for threading 4 =.
  	Battery	000000011d74c000-000000011d7ce000 [520K] rw-/ rwx SM = COW 4 wire

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  Hi 5 deadly venoms

  This problem is resolved in the 9.0.1 update. Please update the application of a patch.

  Thank you

  Kevin

• First Pro CC will not import the .mov files

  Problems with first Pro CC, I can't import. MOV files created with my Canon 6 d.

  If I try to import the files, I get a msg of error "File not supported" very generic.

  It is a new installation of first CC on a new computer. I was able to import them using first Pro CC on the old computer.

  QuickTime will play well these files on my new computer.

  Premiere Pro CS6 will import these files to the new computer.

  First Pro CC would open them well on my old computer.

  I don't know yet where to start. Any help would be appreciated.

  Here are my system details:

  • 10.9.3 OSX
  • new Mac Pro
  • 3 GHz 8-Core Xeon E5
  • 64 GB OF RAM
  • The files are on the G external drive - Tech Thunderbolt.

  Well, I uninstalled and reinstalled first CC and all works well. No idea what went wrong, but its working now.

• Why Acrobat 6.0 Standard recognize the scanner but Pro 9 will not?

  I use these two programs on an Intel Mac (same machine), 10.5.8 Progam.  My Acrobat 6.0 Standard pulls into the scanner immediately, but my Pro 9 will not recognize the scanner.  Is there something I need to do to get the Pro 9 to recognize the same scan?

  Go back to your other thread and read my last post on the SANE / S.A.N.E. Project The TWAIN driver.

• Satellite Pro P875 will not display on '3D ready' 3D projector emachines V700

  Hello

  I am struggling with the display of 3D on a 3d ready projector emachines V700.
  I tried different software, stereoscopic player, CyberLink DVDPlayer 12 without success.

  CyberLink DVDPlayer is configured to use the Intel card - which will not limit its possibilities to use the 3D Vision NVidea support?

  On the NVidea Control Panel, the option for the specification of the graphics card is grayed out and configured for the use of the Intel card, for all CyberLink programs.

  The error message I see, is that the software can not enable 3D support. I used the mode "120 time sequential 3D LCD.

  The Toshiba Bue Ray Player has yet identified the Blu Ray in 3D, as it seems.
  It shows 3D blu ray than 2D and 3D button is grayed out.

  I have:
  Toshiba Satellite Pro P875
  HDMI cable
  EMachines V700
  Shutter 3D glasses: Hi Pro shock

  Hello

  From my point of view, you can use this capable 3D projector as part of the nVidia 3D vision.

  http://www.nvidia.co.UK/object/3D-vision-main-UK.html

  As I m not wrong not the display/projector must support 120 Hz and must be set to 120 Hz in order to use the 3D side-by-side mode.

  In addition you need a compatible software/player stereo standard (for example 3D VISION video player)

• My macbook pro battery will not hold a charge

  My macbook pro battery will not hold a charge. I took in an Apple reseller and claimed him install a new battery. He said that my battery was still good. I asked him to install a new battery just to have a brand new machine. With the new battery installed, the computer still will not hold a charge for very long. I got the Apple dealer and he ran several tests without conclusive results. I always have a laptop that will not hold a charge and must be connected to use for any period of time. Can anyone offer a solution? Thank you.

  Try a reset of the SCM.  System sometimes forget the management of his own material. Reset the management system (SCM) controller on your Mac - Apple Support

• OfficeJet 4620 analysis no or copy but no print

  My Officejet 4620 analysis no or copy but no print. The top is out, but I had reset (I hope). Unable to get above where take place tie scan and copy.

  Hello dbertentha,

  Welcome to the HP Forums.

  I see that you have a problem with scanning and make a copy.

  I see that you said that the upper part of the printer broke but you were able to get back on and now that is where the problem is happening with not being able to scan or copy.

  You are able to print, so we know that you have a communication between the printer and the computer.

  I do not think that this could be a hardware problem and if this is the case, we will then have to contact HP Total care.

  To contact HP Technical Support. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• my xp pro laptop will no longer updates from Microsoft.

  my xp pro laptop will no longer updates from Microsoft. I tried the automatic correction of Microsoft and a manual fix listed but not affect?

  This may have been following a 'clean' without a backup registry.

  Them

  Hi,

  It would help if you provided the WHOLE message and CORRECT, including all codes completely written word for Word - this can often help us identify the problem.

  If you think you know when it started, and it is recent, then see if a system restore to before that the problem will work.  If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  When everything is fixed, get rid of any program you use to do a cleaning of the registry.  Even if it wasn't the cause, it could easily be the next time.  It is poisonous to your system and is not necessary because Windows is a research work on its own.

  ***************************************************************

  Try the following compliments of Alvise - MVP:

  1 open administrative tools by clicking the Start button, and then click Panel.In control of administrative tools type search box, click on its entry.

  2. double-click on Services.

  3. in the Services dialog box, click Background Intelligent Transfer Service (you may need to scroll to find it, the entries are in alphabetical order).

  4. observe the selection (indicated in the third column) State. If you see it stopped, click the right mouse button on the Background Intelligent Transfer Service, make sure that she she defined to automatic and click Start. (If it does not start, click dependencies and do the same for each of them to confirm that they are not the cause of it starts do not.) Continue to the end, then reverse at the beginning and see if she will now stay on automatic and start and stay started. Do the same for services that follow if they does not start).

  5. in the Services dialog box, click Windows Update (you may need to scroll to find it, the entries are in alphabetical order).

  6 observe the State of selection (indicated in the third column). If you see it stopped, click the right button of the mouse on Windows Update and make sure that it is set to automatic and click Start.

  7. in the Services dialog box, click workstation (you may need to scroll to find it, the entries are in alphabetical order).

  8 observe the State of selection (indicated in the third column). If you see it stopped, click the right button of the mouse on my computer and make sure it is set to automatic and click Start.

  9. close the Services dialog box.

  Reboot and see if that helps.

  *********************************************************************************

  If this does not work,

  In C:\Windows\SoftwareDistribution, find and delete the content (but not the folders themselves) records ONLY the following two: downloads and the data store.

  If this does not work, try this: click Start > run > paste the following command into the Run dialog box, and then press ENTER. Wait for the success message.

  % SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

  If the above does not help, then I recommend the following in order of presentation:

  Try to reset components WU:
  How to reset the Windows Update components?

  Try the system update readiness tool:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try the Fix WU Utility:
  Repair & difficulty of the Windows with Fix WU Utility updates | The Windows Club

  ***************************************************************************************

  I hope this helps.

  Good luck!