HP Officejet Pro 8620: HP Officejet Pro 8620Print will not print oversized envelopes

Similar Questions

• OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

  I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

  Hi @thrandall,

  Thanks for getting back to me.

  My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

  Have you tried these steps in my previous post?

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• Now my HP Officejet Pro more will not print Photos or anything else!

  Here I am once more.  I finally solved the problem that I had been downloading the software for my HP printer after that I downloaded Windows 10.  I could not download any software without getting an error message 'download cancelled '.  I was able to print pictures and letters typed with WordPerfect X 6.  I'm embarrassed to say that I accidentally fell into the solution and now I can scan, send faxes again.  Yay!  Problem is NOW, I'm more able to print photos, or anything else!  I go through all the motions and send the message to the printer to print, but nothing happens.  I have already run the hppiw.exe and configure the printer.  When I try to run the HPPSdr.exe, he unzips the file, the printer appears as "installed" and click on the 'Next', I get a screen with 3 different ways to connect the printer to my computer - I choose USB because it'S the way I was connected.  Then I get a message telling me to do that my printer is on (it is)!  and try a different USB port (I have) or try another USB cable (I HAVE!)  OK, so FINALLY I get to the point where I am able to print on a HP Officejet Pro 8600 N911g series Print Page of Diagnostic quality, AND DOES IT!    But I also know there is a problem with the software and I need to uninstall and click the Support link and the Driver to download new software.  But when I click on the link, I'm told I'm not connected to the internet - here we are again.  I'm exhausted.  I am 65 years old and I've been at this for 96 hours.  I've corrected the problems of scanning, but now I can't print while yesterday I was able to do it!   Arrrrggggghhhhhh.

  Can someone tell me why I get the message 'not connected' when in fact I AM connected to the internet?  sigh/smh

  Hi @Galego,

  Welcome to the HP Forums!

  I see that you can not print with your HP Officejet Pro 8600, on 10 of Windows, and I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Then, run the HP print and Scan Doctor to verify that everything works.

  I hope these steps help!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• OfficeJet Pro 8210: Officejet Pro 8210 will not print - need to finish the setup message

  I have installed, implemented the 8210 OfficeJet Pro, HP Universal print driver HE managed mode, installed ink cartridges and printer alignment sheet printed.

  I plugged it in via USB, and the system set up the printer correctly.  I went to print a test page and the printer displays the following message:

  'To print, you must complete the installation.  Press OK and follow the instructions or choose? ».  I press OK, but nothing is displayed, it just goes back to the main menu and the help screen is useless.

  I can print reports in the menu of the printer very well, it will not just print the system Windows 10.

  I've implemented 8 of them exactly the same way with no problems.  I think I can try free managed mode.

  Does anyone know how to reset the printer to factory specifications, so I can restart the entire process to help self-directed mode?

  I took a cat with HP to solve the problem yesterday.  We had to install the full version of the software rather than the base driver.

  It's strange because I had a different Pro OfficeJet 8210 on my work system a few days earlier by using the old driver.

  In any case, it worked, so the problem is solved.  Sorry for without closing the post earlier.

• OfficeJet J3680, suddenly will not print. Blinking orange exclamation point, screen reads "cartridge error".

  Suddenly, my Officejet J3680 will not be printed.  Blinking orange exclamation point, screen reads "cartridge error".
  No troubleshooting of any help.  What should I do?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet J3680 - drivers - the value for your version of Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3441026&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet J3680 - troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3441026&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP officejet pro 6830: will not print in color

  I just bought an officejet pro 6830 e al. in a printer and I can't seem to print in color. I can copy in color by manually typing the colors and all my test prints out ok too. I even tried to clean the print head.  My operating system is a Mac OS X 10.11 El capitan. Can anyone help with this problem.

  @mzacc, welcome in the community of HP,

  I saw your post about how you are unable to print in color, to your Officejet 6830 and I wanted to share my own suggestions with you. See the link and the steps below and judge. You should be able to print in color later.

  • Click on this link and try all the steps: color or black cartridge isn't printing
  • Here are some other suggestions, I have to try the Mac:
  1. Reset the printing system
  2. Restart the Mac.
  3. Download and install the complete driver: e-all-in-one HP Officejet Pro 6830 Printer series full feature software and drivers
  4. In addition, to download this driver: HP v3.1 for OS X printer drivers

  Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

  Have a nice day

• HP officejet pro 8600 will not print documents

  Printer is set up with Wi - Fi. When I try to print documents system does not see printer, even if it appears as a device in the Control Panel has Windows 7 Home Premium.

  Hi Tombuck,

  I see that you are having problems with your printer.  I would try to help from Hp print and Scan doctor.

  HP Print and Scan Doctor

  Let me know how it goes.

• HP officejet pro k550 will not print a test page using the printer buttons.

  How to print a test page to make sure that this printer is still operational?

  I tried all the instructions release possible jams printer, deleted and reinserted the printheads and clean the rollers.  When you press the keys on the front of the printer, it will not print a test page.  and no led error display.

  The printer has been connected to another computer and stopped working last summer.  The printer does not respond to commands from the computer, nor would he respond to the keys on the front of the printer itself.  I can get the printhead to move using the controls on the front of the printer, however.  The printer is not currently connected to any computer and the nearest computer has not installed the appropriate drivers.  Initially the printer is connected to a desktop computer Dell Windows XP (sp 3).

  Here's how to print a self-test of the control panel page.

• OfficeJet 6500 Wireless will not print black ink. Replaced by the new basket.

  Wagon seems a little different from my previous. I have windows 7 64 bit operating system.

  When you have changed the cartridge, the printer tried to automatic alignment?  How it went? (Success or failure)

  So, you did a printhead cleaning (3 levels is preferable in this case)?

  * Press the key on the front panel of the printer

  * Press the arrow on the right for tools, then press Ok

  * Press the arrow on the right for the clean Printhead and press Ok

  I also remove the black cartridge in the printer and try to clean the electric contacts with a clean, lint cloth and water.  Also wipe the contacts in the printer (make sure it is turned off during this operation).

  There is also a document with the steps to solve a problem of printing such as this one.  The document can be accessed here.

  If you get to step on replacing the printhead, then you have two options.  This being a wireless Officejet 6500 (E709n) it is probably out of warranty.

  (1) we can try the workaround provided by Bob_Headrick in the thread found here.

  (2) you can buy the print head since with CN643a part number HP parts store.  The print head sells currently for about US $70.

  (3) you can buy a new printer because it would be not much more than the printhead and would come with a full factory warranty.

  I hope this helps.

• HP Officejet 6700 Premium will not print in color from Word or E-mail but copies in color

  How can I get my HP Officejet 6700 Premium to print in color from Microsoft Word or email.  It copies in color.

  Thank you.

  I would make sure that black ink is not enabled on your computer.

  1. Select Start menu
  2. go into devices and printers.
  3. right click on the printer, select printing preferences
  4. in the lower right corner, select Advanced
  5. then according to the characteristics of the printer print in grayscale as a drop-down list will appear select off if its turned on.

  Let me know how it goes.

• OfficeJet 6000 E609a will not print from Mac applications.

  I can print the HP utility diagnostics, but I can't seem to get any Mac application to print anything. The pages are always hang in the queue with an unspecified error. I tried ALL the recommended procedures for the diagnosis of this problem, but nothing has worked.

  I have proposed several times, and it often works.  Make sure that your OS X is healthy:

  1. download and install Mac OS X 10.6.8 updated Combo.
  2 download and install the Apple for Mac OS X v10.6 HP printer drivers.

• My Pro 100 will not print Yellow

  Any suggestions?

  I noticed that my bad air impressions and I noticed that I had not filled the yellow in some time.  I ran test pages and it was the only color not print.

  I thought that the ink was old and I put in a brand new yellow ink and it still does not print.  I tried a deep cleaning and the printer do not think that something is wrong.  Also if I touch the tip of the yellow ink on a paper towel, yellow ink comes out.

  Thank you

  Try this: http://www.castleink.com/category/82/Cleaning-Clogged-Canon-Print-Heads.html?language=en

• HP Officejet 4630:4630 will not print both sides

  When printing from Wordperfect or other software gives me is no longer able to select 2 sided.  If I select the file > print, I like the pop - up printing.  I then click on properties, I give myself the pop-up page layout.  I click on advanced, and given a screen than ever, I remember having seen it before, it has only three options in this regard: paper/output, graphics and Document Options.  The Document Options has only an option, print in grayscale

  How can I get my print double-sided rear?

  I only did the following two steps:

  • Uninstall the software. Uninstalling the printer software
  • Reinstall using the printer HP install wizard for Windows.

  And it worked.  Now, I can print double-sided.

  But, the installation wizard has been a pain.  He kept cancel my download just before he finished, and he took a number of re-tent before it worked.

  Ted

• OfficeJet 6700 Premium: HP Officejet 6700 suddenly will not print wireless

  I used my printer with my iMac, iPhone and iPad wireless with no problems, but today when I want to print wireless suddenly nothing happens. When I check the printer queue to see what the problem is, everything seems fine, it says: "printing - the printer is in use", but nothing happens in the printer. I clear the queue and you try to print a PDF document, a website, an email... but the printer does not have one of this command. I check the wifi conection and they are both connected to the same network. I am able to print the status report and the network directly from the printer Configuration Page.

  I have run out of ideas of how to solve this problem, apart from the connection with the USB cable, which will solve the problem of computer printing, but not from mobile devices.

  Do you have any sugestion for this problem?

  Easy things first. Power off the printer and the router. Turn on the router and wait 3 min. turn on printer and check that it connect to your router. Try now.