HP Officejet Pro 8620: Im a line is printed to the bottom of each page I copy via adf, including analyses

Similar Questions

• HP Officejet Pro 8620 e-all-in-one printer windows 8

  Printer e-all-in-one-HP Officejet Pro 8620 Windows 8.

  wireless printer is. printing from iphone is OK

  Since my PC win 8 not sending a file to filesgo-printer - printer not respongding - no message.

  I have install new printer 8620 on 8600 series of drivers printer or printing only from my PC

  How can I fix the thanks of printing problems

  Hi @yosiwajcenberg , welcome to the forums there.

  I read your post on your Officejet 8620 do not print for you, on your system Windows 8. I suggest you try the following steps.

  1. go to your control panel and uninstall your printer.
  2. hold your key to Windows and the R key on your keyboard to invite the run dialogue box.
  3. Type "coil" and press enter or click OK.
  4. Select and open the drivers folder, select the x 64 folder if you have a 64-bit operating system or the w32x86 if you have a 32-bit operating system.
  5 open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6 reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  I hope that helps!

  Have a nice day

• OfficeJet pro 8600 black vertical lines of print when copying

  I got a new of OfficeJet Pro 8600 a couple of weeks, and it worked fine until today, when I tried to copy something. I can always print from my pc and scan without problem, but when I try to copy a document (if I load it into the tray or put it on the scanner) the page comes out covered with black vertical lines of different sizes. It seems that this isn't the ink or the scanner since I can print from my pc and analysis very well.

  Help, please!

  This unit is plugged into a wall outlet directly? If this isn't the case, then try to connect the unit to a wall outlet directly.

  The 8600 Officejet Pro has built in the surge protector and double this feature may cause some problems.

  Also, try to reset the printer hard:
  * Unplug the unit while the printer is on
  Disconnect the other end of the power cable from the wall socket direct
  * Wait 30 seconds
  * Plug the unit to the top

  Let me know if it helps.

• HP Officejet Pro 8600: Thin vertical lines when printing photos

  The printer referenced did a fabulous job to print photographs.  In this case, the printer is fairly recent and has recently recently consumed the original cartridges when it was decided to try to use it for photo printing.  Therefore, the fabulous results were extracted relatively new cartridges and consisted of at least a dozen photo printing in various sizes.  Then all of a sudden these thin vertical straight lines began to appear in print.  They are equidistant on the full image.  That they appear in the printed image.  When using paper letter (8.5 x 11) to print an image cropped at 8 x 10 with landscape orientation spacing is about 1 1/8 (one and one-eighth) inches or 8 evenly spaced vertical lines.  Somewhat like the photo was divided into 8 columns.

  According to the printer built in ink gauge, that the cartridges are now just a little more than half full.

  These lines are narrow enough so that they are not very visible when printing on normal paper (copy).  They would probably be imperceptible on many kinds of printed documents.  However, they become quite noticeable and reprehensible when using good quality (in this case HP) photo paper to print photos.

  Absence of a printer resolution is not good for photo printing.

  In addition to the troubleshooting suggests that the problem is not due to the printer, but rather to the software used to perform the printing. It was not immediately obvious that I printed only photos using Picasa and it worked fine and then all of a sudden the problem developed. However, I have now tried to print the same photos with other software and there is no problem for the steps.

  The Picasa forum also has many messages wanting to be the same or a similar problem to what I have experienced. Unfortunately, there doesn't seem to be an explanation for a repeatable cause, nor a specific solution. Some hacking autour with the settings and options seems to be in order. If it does not then print with other software may be necessary.

• Print HP Laserjet Pro 100 Color MFP M175nw missing / disappeared along the axis of each page

  HP Laserjet Pro 100 Color MFP M175nw. operating on Windows 7 from my wireless laptop. Just bought this again a few days ago and every page of the printed word has about 20mm wide streak lack of feeling running down the Center. What can I do to fix this? I tried printing a page a couple of times of cleaning and the print quality too a few times Menu color grading, but that made no difference. I use a Premium quality paper for use of the laserjet printer. Could someone please let know me what I can do. Thank you in advance.

  Hi Watcher35,

  I see that the Laserjet Pro 100 ACM M175NW new is missing print in the middle of the pages, you ran cleaning and color calibration, but the issue is not resolved.

  This would be a specific example of the question: but with the 'Bb' would be completely missing?

  This HP document: solving Print quality problems can if you take some of the same steps you did already, I suggest you don't skip any step.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• It is possible to color the last line (or word) at the bottom of a page?

  Just to mark the end of the image in a page?

  Thank you.

  This sets the last line of each block of text in the document to an existing named red shade. If a problem might be jumping frames where you don't want to change, or what happens when the text is redéroule?

  Tell application "Adobe InDesign CS6"

  f the value of each block of text in the active document

  the value s swatch 'Red' in the active document

  Repeat with x in f

  -replace line with Word to get the last word

  The object reference of the last line of the content of the p-value x

  set the fill color of p to s

  end repeat

  tell the end

• OfficeJet pro 8620: how to set up printer to turn on automatically when you receive an incoming fax on a dedicated line

  I want to configure my printer to turn on automatically when receiving incoming fax. Do I have to leave power or can I change the setting to turn on automatically with each incoming call. He is a dedicated fax line that is not connected to my computer. Also there is a sleep mode, the power led remains on when you use the sleep mode?

  Hi @mcqwats,

  Welcome to the Forums of HP Support! I see you want for your printer HP switch automatically when an incoming fax arrives. You have not the possibility to activate the automatic answer - on, but the printer must be turned on so that this function executes.

  There is however no way to set the preferences to activate the printer when it is off.

  I hope that answers your questions.

  Thank you

• OfficeJet Pro 8620: Problem with two-sided printing by default settings Officejet Pro 8620.

  On my MAC, I opened the preferences system - print & Scan - Options & supplies, the pop up window only contains two tabs: Gerneral and power levels. The other tabs such as the default settings are not displayed. So I can't set default 2 Facer of printing. In such a case, I find that I can always print both ways in the face of some software where I can change the settings for print specifically in this software. But I can't change the settings of the printer in Adobe Acrobat format, because change is always through the same interface as I mention above. How I solve the problem? I am connected to my printer via wifi. Thank you.

  

  Hello

  In Adobe Acrobat, open the print dialog box, and then click on the "Printer" button... "to access the print dialog box standard operating system.

  There should not be a default on a Mac tab, the settings can be saved as default recording these as a preset in the print dialog box, then a used preset will be default.

  Shlomi

• HP OfficeJet Pro 8620: Why do I need to install the color when I never use color?

  I just ran black ink. I replaced the black cartridge with a new one one XL.  Now it tell me I need to replace one of the color cartridges to print just in black.  I never use the color and do not want to buy color cartridges. Is there away around him?  The message appears on my printer that I can't print until I have replace the cyan cartridge.  So stupid!

  Thanks for any help or suggestion.

  Thank you for your quick response! Unhappy with the answer, there is nothing that you're some time I can do about it! Looks like a crazy concept for me but it is what it is. I thank you for having taken the time to get back to me I really appreciate it. Nice day.

• HP OfficeJet Pro 8620 e-All-in: how to remove the output tray on my HP OfficeJet Pro 8620 e-all-in-one printer

  I can't remove the output tray.  I do some print double-sided (one in color, the other b & w).  It's time to remove the main input tray to place paper for side 2.  It would be much easier to take the 1 side printed just as it ended, and then set it just fine on top of the blank sheets in the main input tray to print page 2.

  I can't remove the output tray.  The store clerk said that it should be easy to remove and re - install, but that it can be kept in place by a piece of tape.

  I'm prone to breaking things, I am working on that.  I don't want to break my 4 month old printer!

  Any ideas?  Thank you.

  The main part of the output tray is not removable.  There are a few alternatives: the tray can be removed partially opened and printed pages, loaded in it - it should not be necessary to remove the tray completely.

  The other possibility would be to simply print using the auto duplexer.  If you are printing on plain paper or paper index, it should work, it would not be suitable for printing on the back of the photo paper.

• OfficeJet Pro 8600 N911a is no longer prints except the test page or status report

  The object printer worked fine until today when it stopped printing from my Macintosh computer.  I am able to print very small application PAGES but message with any normal print job, I get the following messages:

  The printer ready

  Preparation print

  Connected to the printer

  Print page 1

  (slight noise of printer)

  100% full

  The printer ready

  In other words, she almost immediately jumps to 100% full when in reality it has not yet started printing.  It then acts as if it was ready for an another print job saying printer ready.

  DonovanH thanks for your help.  The result is that now the printer works because of some experiments I did.  I pass the steps you suggested and I still had the problem, but further experiments showed that the pages that would be printed not had a warning that they are associated with "character borders are not supported and were removed.  I don't know why this document in particular has these problems, but I find that all documents without such warning prints fine except that they seem to often slower than expected.  Any document with this warning indicates quickly as it's done 100% but it does not print.

• HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

  This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

  Hi Hank, there.

  Sorry to hear that you are having a rough go with the printer.

  With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

  1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

  2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

  3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

  Hope this helps

• HP Officejet Pro 8600 e-all-in-one printer Windows 7 64 two-sided page 2 upside

  When you print two sided pages, page two is printed backwards

  Hello

  Where you print (application), according to a provision in portrait or landscape, you can also "Flip on long edge" or "Flip on edge short" in order to get the correct order. Please try it under properties.

  Kind regards.

• OfficeJet Pro 8620: ADF Scan black line down

  Hello

  When I scan documents using the ADF, I get a black line at the bottom of each page (only the right side of the book). I tried to clean than the small scanning area - but I still get the black line - any idea how to get rid of him?

  You can download a sample scan pages virgins og here: https://files.secureserver.net/0s4RbMeFgHa3lX

  I just wanted you to day.

  After replacing the printer OfficeJet Pro unit 8620 3 times (when having tried 4) and I tried a HP Officejet Pro 276dw with the same problem, I ended up cancelling my order and get my money back.

• HP Officejet Pro 8620: HP 8620 found by iPhone or Mac

  My mac and my iPhone no longer find our HP Officejet Pro 8620.  Have restarted all devices.  Reset the printer to the factory settings and reconnected to the wireless home network.  Mac and printer are wireless connected to the same network.  Printer has latest version of the firmware.  Printer copies and prints the pages of test and configuration fine.

  I just can't print via AirPrint from my iPhone, or add it as a printer to my Mac. When I go into Printers/Scanners, the printer is not found... not by IP address or host name, or the other.  I have tried everything and am almost ready to go buy a non HP printer... This is the second HP finnicky, we had.  Help, please.

  In addition, we have an Airport Extreme router, if that helps at all.

  Hey @IowaMom,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the printing of your Apple devices to your Officejet Pro 8620 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, on the printer, click on the wireless icon that looks like a radio tower. Now:

  • If you see a line indicating the status: not connected, then the printer is not connected to a wireless network. Click on the gears and wireless wireless configuration settings to connect the printer to your wireless network.
  • If the IP address of the printer starts with 169.254, the printer is not get a correct IP address of your router. Contact Apple or one that is provided with the router to determine why the printer is not getting a valid IP address.
  • If the IP address of the printer starts with 172, the printer is connected to a network of comments. Contact Apple or one that provided you with the router for assistance with deactivation of the feedback network.
  • If the IP address of the printer starts with 192.168 or 10, the printer is properly connected to a wireless network. Please see below.
  • If the IP address of the printer starts with another number, your network is maintained. Contact, who has set up the support network with the printer connected to your wireless network.

  At this point, you should be able to print. If you are unable to print, the next step would be to check the printer and all the devices to ensure that the first three sets of numbers in their IP addresses match. If they match, there is a setting on the router to which the printer is having problems with. Contact Apple or the one who gave you the router and ask them to do the following:

  • Open all ports.
  • Select multicast.
  • Disable MAC filtering/MAC cloning.
  • Disable the network of comments.
  • Make sure that the router broadcasts a band of 2.4 GHz (gigahertz).

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.