HP Officejet Pro 8630: HP OfficeJet 8630 tray selection when copying

Similar Questions

• OfficeJet pro 8630 + is not centered copy - printing and scanning ok

  Older than two months Officejet Pro 8630 (> 400 pages) - copies of plate or charger are shifted to 3/8 of an inch on a side. Printing from computers or scanning is centered.

  FDP1CN1416AR firmware version

  Using tray 2 by default. Tray 1 is used for printing the envelopes.

  Thank you

  I found that turning on/stop margin shift and turning on the margins by default button a few times eventually set the output to the centered normal copy.

  If the settings are now to original (shift off and default on) the printer now copies centered. Must have been a burp of firmware. If that happens again once I try a hard reset to clean.

  Thanks anyway.

• OfficeJet Pro 8630: Tray 2 by default not recognized on the manual copy

  Although I have tray 2 (plain paper), selected as the default tray and Tray 1 (photo paper) locked, manual copy from the printer control panel causes flow use of tray 1.   Tray 2 must always be selected manually if the printer has "slept" since the last copy operation to manual.

  How do I get the printer to recognize that the tray 2 IS really the default?

  Hello

  From the screen to your printer press on copy, then click settings, then select the required tray.

  Then select as set as new default and confirm any change, then try again.

  Kind regards

  Shlomi

• OfficeJet pro 8600 black vertical lines of print when copying

  I got a new of OfficeJet Pro 8600 a couple of weeks, and it worked fine until today, when I tried to copy something. I can always print from my pc and scan without problem, but when I try to copy a document (if I load it into the tray or put it on the scanner) the page comes out covered with black vertical lines of different sizes. It seems that this isn't the ink or the scanner since I can print from my pc and analysis very well.

  Help, please!

  This unit is plugged into a wall outlet directly? If this isn't the case, then try to connect the unit to a wall outlet directly.

  The 8600 Officejet Pro has built in the surge protector and double this feature may cause some problems.

  Also, try to reset the printer hard:
  * Unplug the unit while the printer is on
  Disconnect the other end of the power cable from the wall socket direct
  * Wait 30 seconds
  * Plug the unit to the top

  Let me know if it helps.

• Satellite Pro A110 blocking (he must press power) when copying large files

  I have two users the two ProA110 PSAB1C-GM60XE that hangs just at the copy files or randomly just by using the network connection.

  The network card is a Realtek RTL8139/810 x Family Fast Ethernet NIC

  I updated the driver to the latest version 5.708.1030.2008

  I also reset the TCP/IP Protocol:
  c:\netsh int ip reset c:\resetlog.txt

  Disable "Allow the computer to turn off this device to save power" on the properties of the NETWORK adapter

  I tried to re - install XP and the same problem.

  Shows the Windows event log. "Your computer failed to renew its address from the network (from the DHCP server) for the network card with network 0016D address 4258701." The following error occurred:

  The semaphore timeout period has expired. . "Your computer will continue to try and obtain an address on its own from the server network address (DHCP) '. Nothing came on Internet search that help.

  All who have similar problems and how it was resolved very useful.

  Thank you!

  Hmm, I searched a bit on MS pages and found this:
  em http://www.Microsoft.com/technet/support/EE/Transform.aspx?ProdName=Windows%20Operating%20Syst & ProdVer = 5.2 & EvtID = 1003 & EvtSrc = DHCP & LCID = 1033

  The reasons for this question might be:
  The DHCP server is down or does not.
  The DHCP relay does not work correctly.
  The network is down.
  The firewall on your computer blocks on broadcast network traffic.
  Network interface card or your computer driver does not work correctly.

  Microsoft offers different solutions, workaround and solution proposals.
  Please visit the mentioned MS.

  Good luck

• HP OfficeJet Pro 8630: Trouble legal paper in tray 2

  Hello!

  Thanks in advance for any help you can offer... two problems, I need help. I always use 8.5 x 11 cardstock in Tray 1 and 8.5 x 14 paper in tray 2.

  1. when I print a legal document of the size - and have the setting of the printer, the Auto Select value (for what bin pull) - he STILL has pull Tray 1, not tray 2 (which is the legal document size. I gave up to have auto-select the correct tray, so whenever I choose manually legal under paper size - and tray 2 in order to make it work. How to make this work correctly without haivng to make these changes? Now that's what I'm doing...

  First... Printer Setup/layout page/advanced/legal

  Then... (Printer setting) / Paper Source/tray 2 paper/quality.

  2. my BIGGEST problem is that media type or tray 2 paper type will allow me only to choose "Plain paper" not cardboard. I print color documents full page - so it makes a HUGE difference in quality when I set it to cardstock vs regular paper (to the title of best in the print quality option). It allows me to make this selection to Tray 1 to plain paper, but not for legal reason any.

  Subsequent procedure registration to the first question, if I change the Media Type of cardstock, I get an error saying...

  "There are one or more conflicting settings. One of the conflicting settings is:

  Input tray - tray 2

  Media Type - cardstock

  And then it makes me go back to plain paper for it to print. But when I go on tray 1/letter Sized paper-it works very well. I put legal paper in Tray 1 and tried this way-(legal size, tray 1, cardstock, better) and it prints correctly. BUT, I want it to work with tray 2.

  Any suggestions would be greatly appreciated! Thank you!

  Lauren

  Hey @higgybears,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing on cardstock from tray 2 of your 8630 e-all-in-one printer Officejet. The reason why you are having problems is that TRAY 2 is designed to be able to handle only for plain paper. HP recommends using only of plain paper in the second bin. If you pass the paper in Tray 1 when you change jobs, you should not have problems with the software.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8630: HP Officejet Pro 8630 Setup loading paper

  I have a new HP Officejet Pro 8630. Through the installation process, it is stuck at the loading paper. I loaded the paper in the upper and lower trays. I checked the trays and cartridges are seated well. Clicking next translates into a printer Calibration cycle - then returns to the loading paper. Help! Thank you.

  Hey @Zaldar,

  Welcome to the Forums of HP Support!

  I understand that your Officejet Pro 8630 e-all-in-one printer doesn't detect paper during initialization. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed this document explains How to solve problems of choice with your printer. If at this point, you are still unable to initialize the printer, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to discuss the options.

  Please let me know if you are able to reach a resolution. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• ... My BRAND NEW HP Officejet Pro 8630 load photo paper...

  I just bought a HP Officejet Pro 8630 and it will NOT print on paper HP Premium Plus Photo or a generic brand of paper photo.  I just unboxed and configure all web settings.  Printing on plain paper works fine; However, when I place a small load of ~ 20 sheets of paper in the UPPER tray, the printer is trying to load then present and error message "Out of Paper".  I can then immediately turn around and put a single or the stack of paper in the upper tray and the printer will print.  I tried a single sheet of photo on a stack of regular paper, remove the stack of photo paper and loosening the battery in order to ensure that they don't are not glued together, as well as turn off the printer and the cleaning of all THE rolls by instructional video of HP and it still DOES NOT... (out of paper message).

  I got exactly the same problem with an Officejet Pro 8600 this printer just replaced.  I had a similar but even more frustrating problem with HP 8500Pro; None of them will properly load the photo paper.  I do not know how to choose the type of appropriate paper via the print from the application menu and I tried to choose the types of paper "regularly."  No solution worked.  I'll take my stack of photo papers to the store chain that I bought the printer since they have the same model of 8630 display.  I will then try to print a test them to see if the same error occurs.  If it works there, I'll take this point to poor quality HP control and quickly return my printer.  If them does not load, I have to draw them on paper photo off their tray, and then try again.

  Please help...

  Update:

  I went back to the store I bought the printer from.  They had Xerox 80 lb stock in Tray 1 and it printed without problem.  I took a stack of my HP Premium Plus Photo Paper (~ 20 sheets), removed their and mine inserted into Tray 1.  It would not load the paper and gave the same error 'out of paper '.  Commercial agent has experienced the same problem.  She then withdrew the paper except just a sheet of my Photo paper; It is then printed.  It prints all the way up to 4 sheets inserted at the same time in the status bar.  Any more of 3 sheets caused the printer to fail to load the paper.  It sounds like a fault with HP loading mechanism.  I noticed that the Xerox 80 lb pound felt slightly thinner my photo paper I have so bought Advanced Photo Paper from HP (66lb) as opposed to the Premium Plus.   I took a pile of about 15 leaves for the printer and loaded.  It seems to load well and has not failed with an error.

  HP... you've had several lines of OfficeJet Pro to do things and it seems you are always dropping the ball with a defective printer product.  Where is your quality control?

• OfficeJet Pro 8630: how to install additional color on the 8630 printer cartridges

  I just bought an Officejet Pro 8630 with additional color print cartridges.  I went through the instructions but I do not understand where they tell me to insert additional color cartridges.  I've looked everywhere but I still can't find where they need to be installed.  I installed the original color of 3 and 1 black cartridge supplied with the printer in the tray as shown, but when he got to the extra, I'm lost.  I can't find the instructions to install these additional color cartridges anywhere.

  Hello

  You cannot install additional color cartridges, the printer uses 4 ink cartridges (black, yellow, Magenta and Cyan).

  Additional color cartridges included in the box are intended for future use, once the original ink cartridges is exhausted.

  Kind regards

  Shlomi

• OfficeJet Pro 8630: Officejet Pro 8630

  Has anyone linked their HP Officejet Pro 8630 to a laptop to PC windows 10 via Blue Tooth. The vendor home Harvey said it would be, the live chat online said it will but directions have not accomplished. Any help would be appreciated

  After a few more hours (spred a few days!) I finally managed to get the wi - fi print job!

  Thank you again for your great advice - you really should write an Idiots Guide to the connection 8630's.

  Your time, expertise and willingness to share your knowledge are really appreciated

  My sincere greetings and thanks

  Colin

• HP Officejet Pro 8630: Set up to scan

  Im trying to set up the feature on printer for analysis.

  I have an IPad & IPhone and can't understand how I can activate the analysis feature.

  I don't have a desktop or laptop computer.

  appreciate any guidance

  Thank you

  Hi @Fangers1,

  Thanks for joining the Forums of HP Support with your scanning application.

  I understand that you want to scan from your IOS from Apple to a HP Officejet Pro 8630 devices e-all-in-one printer. I would like to help with that.

  Scanning software HP is usually provided with the software that you install normally on a desktop computer or laptop, if you had one that is.

  HP AiO Printer Remote App is available on the App Store on the iPhone and iPad. The HP all-in - One Remote Printer is a free mobile application that allows you to print and scan wireless using the supported printers compatible HP web that is located on the same local network as your mobile device wireless.

  Here is a support document which can serve as a reference when you you install using the application - Mobile printing and scanning with HP AiO Printer Remote App.

  Please let me know if that solves the problem, or if you need assistance.

• HP Officejet Pro 8630 - work of borderless printing produces blank pages

  Hello-

  On my HP Officejet Pro 8630, when I start a print job and select ' without borders on "print 3 or more copies, the first 2 pages of the print job, and then a blank page prints, followed by a good impression, followed with a blank page, etc. until that work ends.

  If I disable the option without borders, the job will print correctly without blank pages.  I tried printing from multiple computers and programs with the same number and have updated printer drivers / the most recent versions.

  I tried printing wired network, wireless network and USB all with the same result.  I've had the printer for less than a month.

  I use the printer for business purposes, and it is causing the major headaches!

  Thank you

  I solved the problem by selecting the Type of paper - HP Bright White... She has been set to the default value of plain paper.  I can now borderless printing correctly without blank pages.

• HP Officejet Pro 8630: Envelopes single impression that all the black

  Use the same word for Mac 2011 file print envelopes once each month for years, but since I'm the new printer 8630 in August 2014, I get the occasional envelope all black (with a thin white border around) instead of the usual address.  I implemented with it to this day, but this month I do nothing will make me normal print - I tried to create a pdf file and checked all settings, so am at a loss to get a result.  Help? John

  Hi @jrandsk and welcome to the Forums of HP!

  I see that you are having problems printing envelope. I would like to help with that!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the e-all-in-one-HP Officejet Pro 8630 Printer series full feature software and drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet Pro 8630: Officejet Pro 8630 don't Scan to Email after move to new office

  We have recently moved offices and now we can not Scan to e-mail at work (he has worked great previously).

  We are on a wireless network at the office and I can print fine, but no scan to E-mail.

  I tried the settings via the web interface, I rebooted the router and the printer, I deleted all the accounts on the web interface and created a new, but it won't always work.

  Help?

  Hey @KBoyett,

  Welcome to the Forum from HP Support.  I understand that you are unable to reconnect the scanning to e-mail, using your HP Officejet Pro 8630 e-all-in-one printer.  I would like to help.  I have a few steps, you can try that may fix this problem.

  It is optimal that you have a wireless connection.  I do not recommend restoring the default settings of your printer to make sure that all old settings scan to e-mail are deleted from the printer.  Here's how:

  • From the front of your printer, press Setup
  • Touch Tools
  • Press restore defaults

  This will clear your wireless network, Web services, and other custom printer settings.

  Then, follow these steps:

  • Connect to your wireless network (run Setup under wireless settings wireless Assistant)
  • Tap the copy icon on the lower left below to enable Web services
  • If your webservices are enabled you can now configure your scan to e-mail

  There are two ways to Setup scan to e-mail:

  Method: use the scan to e-mail Wizard to set up scan to email

  Follow these steps to use scanning to e-mail Wizard in the HP software to set up the Email scanning function.

• HP OfficeJet 8630: Duplex scan on HP OfficeJet Pro 8630

  How to set up my HP OfficeJet Pro 8630 to automatically scan both sides of the document letter size?  The "answers" published do NOT address my concern or are on different printers.  Please note: HP OfficeJet PRO 8630, no other printer info please...

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  About scan 2 sides of the Control Panel, for example if you select Save as PDF, there is one "original side 1 or 2 sides original option" as shown:

  

  

  Good day!