HP Officejet Pro 8630: HP Officejet Pro 8630 Setup loading paper

Similar Questions

• Photosmart Pro B8330: Printer load paper partially, then you need the paperload button to print

  Printer paper partially load then the paperload button will Flash. It ejects the 1 piece of paper and prints on sheet 2. It has worked well for years & it just starts now.

  It happens whenever I have print regardless of what program I can print.

  I'd appreciate any help I can get.

  Thank you

  Hey @Kaytee68,

  Please get back to me regarding this issue of the paper. Due to the age of your printer I don't have not access to one in fact resemble the back of the printer and look at the rollers to check what is normal to see or not.  By saying so, I cross reference to what you have explained to this image.

  

  It seems that there should be 4 rollers rubber at the back of the printer. It is possible that if one of your rolls is missing it can result in paper or power problems another paper. The rollers are not replaceable parts. Therefore, if a roll must be defective, and because of the performance issues with your product a replacement of the entire unit would be necessary.

  Because you have exhausted the troubleshooting steps for the same problem that I previously provided, the next step would be to replace the printer.

  It has been a pleasure to work with you. Good day!

• Color Laserjet MFP M177fw Pro: MFP M177fw load paper

  printer had a paper jam. the paper has been removed. now the printer load paper

  Hi @ncm1,

  Thanks for getting back to me.

  I have recommended to perform cleanup on the rolls of paper several times, to see if she gets the movement document.

  Make sure that you use the correct paper size and type and that you are not overloading the paper tray.

  Handling - paper Manual

  Entry, standard paper management

  • tray of 150 sheets

  The production of standard paper handling

  • 50 sheets facing the low bin

  Maximum output (leaves) Up to 50 sheets Double-sided printing

  • Manual (Manager for support provided)

  Output over management

  • Offset machine leaves

  Supported media formats

  • Letter, legal, Executive, 4 x 6, 5 x 8 in, 8.5 x 13, envelopes (No. 10, Monarch)

  Support, custom formats 3 x 5 to 8.5 x 14 in Support, custom formats 76 x 127 to 216 x 356 mm Types of media Paper (bond, brochure, colour, glossy, photo, paper, letterhead, plain, preprinted, prepunched, recycled, rough), transparencies, labels, postcards, envelopes Weight, supported 16 to 58 lb. (link) Media weight, ADF support 16 to 24 lb

  If the problem persists, contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Good luck!

• 8600 pro Plus scanning for paper A4 on Mac

  8600 pro Plus scanning for paper A4 on Mac

  I'm unable to scan A4 paper on my device of 8600 by using the HP scanning Application. I have validated that I use the latest software/firmware.

  I can print on A4 paper just can't sweep.  Any help would be appreciated.

  Hi TLC20,

  Thank you for your answer! I was wondering if you are able to copy with A4 paper.

  In the meantime, try the following:

  Load A4 paper on the ADF clash.

  On a Mac, click the Apple icon, click System Preferences, click Print & Scan, select your printer in the list, click the scanning tab, then click on open Scanner.

  Make sure that the document feeder is selected not to dish. Then change the format of A4 paper.

  Hope this helps you and have a great day!

• My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  Apple has set the rates, price around $300 repair program.  I don't think you can get a price of paste elsewhere.  However, there are third-party sites that provide repairs, parts and helpful videos.  Google is your friend.

• Message ' load paper ' wrong on Officejet 6500 has more

  I get a message ' load paper ' on my Officejet 6500 has more.  When I first got the printer and installed with my office, it does the same thing, but he stopped after a download from HP.  Today I installed it on my laptop, and now it gives several times the same message despite that I have loaded and reloaded varying amounts of paper.

  Windows 7 64 bit

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  http://goo.GL/NeUWY

  Good luck!

• XP Pro\XP Setup dual boot - want to remove the configuration option and go straight to the Pro

  Used my laptop (Fujitsu Simens Amilo Pi 1505/XP Pro) to install XP Home on a USB connected the SATA drive.
  SFSG.
  Now, my laptop keeps asking me if I want to boot into either Pro or Setup, with the installer has highlighted.

  Q. How can I remove the Configuration option and leave Pro as default boot?

  Thanks in advance.

  Open your boot.ini file (root partition C :), you should see something like the following:)

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect
  "multi (0) disk (0) rdisk (1) partition (1) \WINDOWS="Setup "/ fastdetect

  Remove the entry (the entire line) that has the word "Setup" in it, then you now have the following text:

  [boot loader]
  Timeout = 0
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windowq XP "/ fastdetect

  -Alternative-

  Start/Run/msconfig (this open the System Configuration utility.
  Select the BOOT. INI tab
  Click on the button "check all boot paths".

  If Msconfig detects a path not valid (you have stated that you have two)
  you will be asked to remove the invalid path.

  J W Stuart: http://www.pagestart.com

• OfficeJet 8620: can not copy, says load paper

  Said the paper loading

  Hey @Cer1260,

  Welcome to the Forums of HP Support!

  I see that you see an error message on your 8620 e-all-in-one printer Officejet to load paper. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve problems of choice with your printer.

  If after the above, that you are still not able to copy, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to copy or to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP officejet 4500: error message always saying load paper in paper on hp officejet 4500 using 10 64-bit windows

  I using hp officejet 4500 10 windows, printer. error message saying "load paper in paper," but I have papers

  NEED HELP! IMMEDIATELY

  Hi donj1,

  I have provided the reset of the printer try to please.

  Please take a moment to read the privacy policy of HP to

• brand new in box hp officejet 4630 guard indicating a paper jam

  I tried to install a new hp officejet 4630.  It indicates a paper jam (where no paper jam exists) the machine is impeccable.  Should I return it to the store for a new. I tried everything including a power reset.

  Hi @weezer2,

  Welcome to the HP Forums!

  I noticed that your brand new out of the box HP Officejet 4630 keeps showing a paper jam. I'm sorry to hear that, but I'm happy to help you!

  Please, try the solutions in this guide, a "Paper jam" error on the HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If you have gone through this guide, and the paper jam persists, the printer must be replaced. You can go to the store or you can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope that answers your question and have a nice day!

• I have Windows 7 Pro English pre-loaded factory! is it possible to change the language of the Interface in Arabic?

  I have Windows 7 Pro English pre-loaded factory! is it possible to change the language of the Interface in Arabic?

  Win 7 Pro Support switches language? or only win 7 Unltimate and Enterp?

  Original title: dass

  Business or ultimate edition

  http://Windows.Microsoft.com/en-GB/Windows/language-packs#lptabs=Win7

• Correct icc for a hp officejet 6600 and hpq2509a glossy paper profiles

  Where can I download the correct icc profile for a hp officejet 6600 and hpq2509a glossy paper? I use Lightroom 4 proofing. I would like to get an overview of what should look like a photo until I print. Any help would be appreciated. Thank you.

  -Paul

  Paul, I think icc profiles are generally more specific to the program you are using. We do not have some that are for our printers, but they were created for our software, Designjet.

  Also, I know that most of the new monitors will allow you to adjust their resolution to display photo-realism because they are usually of the additive RGB and not the subtractive CMYK who use printers.

  Here is some quick information, I found about it: http://goo.gl/QOSmX

  I would like to know if this information helps!

• I downloaded the Adobe Pro 9 Setup program on a new mac and it says that it can not be installed because it comes from an unidentified developer. I have a serial number and want to just 9 Pro on my new machine

  I downloaded the Adobe Pro 9 Setup program on a new mac and it says that it can not be installed because it comes from an unidentified developer. I have a serial number and want to just 9 Pro on my new machine

  How to open third-party applications to developers not identified in Mac OS X "Mac tips.

• Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly.

  Hello world

  Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly. (or something like that... I work in German...)

  I just bought all Deinstalled CC all and installed again and again.

  The problem persists... just with premiere pro cc 2015.2... I'm working on windows 7.

  You have an idea?

  Thank you very much

  François

  You can please go through the requirements for Premiere pro - Premiere Pro system requirements for Mac OS and Windows

• Can I subscribe to Acrobat Pro DC and load it on my desktop and laptop computers with one subscription?

  Can I subscribe to Acrobat Pro DC and load it on my desktop and laptop computers with one subscription?

  one single-user subscription lets you install your programs cc on an unlimited number of computers.

  the only limitation is that you can only sign-in (and so start your adobe programs), at most, two computers at a time.  But adobe's sign and so easy is not important if you have an internet connection.