HP Officejet Pro 87625:8625 Question on... the fax settings and scan Windows

Similar Questions

• OfficeJet Pro 8620: Locked out of the printer settings

  Good evening

  I was unable to print wireless so I did a network reset the unit. When I rebooted the machine, I proceeded to return to the network settings in order to capture the wireless information however I received the error "function has been locked by the administrator or the person who set up your printer".

  I'm not sure what is the problem with that I'm the one who created this printer. I assign a password to the machine, and with that, I have no option to enter in order to unlock all the features (there is usually an option under 'Tools'.).

  After some searching through the forums, I printed a wireless test and the results were a single FAILURE for Wireless on.

  Any help/suggestions would be greatly appreciated.

  Kind regards

  Mark

  He had a semi full reset, which once preformed resturned unit to its state of semi reset and allowed me to change the settings I made.

• HP Officejet Pro 8500 A909g: B87126D0 - turn the power off and then on again - Officejet Pro 8500 A909g

  Printer displays this error.  When I turn it off it automatically re - start, head cleaning cycles and system then, checking everything as you think it is all new sorted, it goes back into the error.

  I tried without clogging and the location also.  I tried to turn off the wireless cable connection but the loop continues.

  I've seen other posts on this error of 2013 and 2014 but don't know if the answer is the same today?  Can you please suggest a solution?  Thank you

  Welcome to the HP Forums @MrsNoName2013

  I came across your post about the problem of error code you encounter and I wanted to respond to help with my suggestions. I have some links to share with you, because the error code could be coming during a network installation, or it could be a type of system or the cartridge of the problem. I wanted to cover all the bases to try everything and nothing. If you do not connect the printer to a network, you can ignore the first link and go the other links.

  If the problem persists after troubleshooting, please try to call the hotline to discuss replacing the printer or the rating of. I will include HP contact info below to reach them directly.

  1. The "Bxxxxxxx" Error Message appears on the product during the installation of network
  2. A message 'Replace the ink cartridge empty next' on the all-in-one after I installed a new cartridge
  3. A "alignment failed" Error Message appears on the printer control panel
  4. "The following printhead appears to be missing or corrupt" or "the following printhead has a problem.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP OfficeJet Pro 8710: HP OfficeJet Pro 8710 print do not tried HP Print and Scan Doctor

  Hello HP Forum,

  I'm new and have read many articles on printing does not. I had this printer yesterday and I was so excited to use it! When came home... DOH! Nothing prints not! So, I used the print and Scan doctor and that fixed it... temporarily. Now it won't print and print and scan doctor said nothing! I printed something this morning, but I saw a mistake, then I went to print it again, nothing would have uttered. I'm getting a little angry that I (May) have lost $170 on this thing.

  I could really use some help please! If not, I just lost $170 on this thing.

  My system is Windows 10 1511 Pro 64 - Bit, and the printer is USB connected.

  Thanks in advance,

  HPOJPro8710

  Edit: I just tried printing HP and Scan Doctor 4.9 once again, now it works again. But this will not last forever, I need a permanent solution.

  Edit 2: I forgot to add that I intend to leave it on all the time. It is good to do? Causing my problems?  My grandparents have their HP OfficeJet Pro 8600 24/7 for I don't know how many years! haha and they have no problem!

  I got a HP OfficeJet 4630 USB connected, and I turned off each time and printed correctly. Only had to fix once with HP print and Scan doctor.

  Hi, seems that your computer is powered off the USB ports to save energy.
  Check in the Device Manager.
  Check under USB controllers.
  Check all USB hub root.

  Select power management and ensure that:

  Allow the computer to turn off this device to save power is DISABLED.

  Use a USB cable of good quality, not more than 6 feet long.

  Connect the 8710 directly to a power outlet wall.

• Question about the composition settings and make

  I looked for an answer to my question, but had to ask at resort, sorry, it's pretty basic, but a direct response is needed I think.

  I imported a project in Premiere pro with two layers of still images with movement and applied effects. I work for a few weeks now, with variations on these pictures and had many number of exports of EI through the render queue.

  After you import the compositions of first CC my starting point; composition and other settings of composition parameters are all resolved HDTV 1080 25 but the set resolution in which I unfortunately now has, is defined as 'Half' (960 * 540)... New compositions also sets the default resolution somehow half...

  My question is about my previous exports and subsequently.  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module? So far, all my renders are 1080 p by default and no 960 * 540. These have been uprezed to 1080 of 960? ... - I have not changed any setting on the resolution in the rendering module - they all came out 1080 after.

  Thank you

  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module?

  N ° except if you change the settings of default rendering, which is "Best settings" in "current Configuration".

• OfficeJet Pro 8610 does not print the files, but other things work

  Hello

  I want to install a whole new 8610 to our computer with WIndows 8.1 HP's OfficeJet Pro and I use a USB cable.

  I installed everything correctly according to the setting (green controls along the + "full installation") and the printer is set as default (also with the green check mark).

  There is communication between the two because I can print test pages (head alignment, etc.) for HP printer app and I can also scan a doc to the PC successfully.

  Despite the light the printer in the print menu, when you try to print, I can't any print file from PC to the printer, an email or a Word doc.

  And what baffles me, is that I can see the printed file go into the queue for a bit of treatment, then it disappears as if it's done, but it is not an activity of the printer.

  I completely uninstalled and reinstalled nothing doesn't.

  This should take 10 minutes to Setup, and I just don't understand.

  Thanks for your help.

  Hi Ringo1115.

  You might try the recommendation at the following link.   If this does not resolve your problem, you might want to try the tool print and scan diagnostic.

  If one of them resolve your problem, please write it down as resolved.  In this way, others may benefit from your experience.

  I hope this helps you...

• OfficeJet Pro 8600-COPY Question

  How to copy a page 2 faces on a page?  In other words, 2 face 2 face...

  Hello

  Please specify the exact printer model:

  The HP Officejet Pro 8600 (N911a) do not provide duplex ADF to scan a two-sided original, but only print double-sided.

  The HP Officejet Pro 8600 Plus (N911g) / Premium (N911n) however do not provide this feature.

  If your product is the Plus or Premium models, follow the steps below:

  In the main menu printer, click the copy.

  Double as original copy / 2 sides 2 sides and perform the copy job.

  Kind regards

  Shlomi

• HP Officejet Pro 8600 - Paper copy on the glass of the scanner, Officejet tries to copy the ADF

  I'm trying to copy a document on my HP Officejet Pro 8600.  I placed the original face down on the scanner glass.  There is no original in the ADF.  Then, I pressed "Copy" and "launch in black."  the Offficejet then "think" the original is in the ADF file and try to copy a non-existent original.  The Officejet then generates a paper jam «»
  in the ADF file' error message with instructions to clear paper jam and press 'OK' and spews a piece of paper from the paper tray. There is not an option for 'back '.  If I try to humor the Officejet by opening and closing the cover of the ADF and pressing 'OK', the Officeject generates a copy which is covered with black ink.  If I ask preview copy o, the document on the scanner glass is displayed.  I can adjust margins, etc.  When I select then 'copy' and 'Black start', the Officejet is trying to copy a nonexistent document in the ADF and generates the "Paper jam" message again.  Since there is not an option "go back", I turn the printer off, then turn it back on, and then try again.

  How do I train me or the Officejet for copy of the scanner glass when the original is located on the glass of the scanner NOT the ADF?

  Thanks for your help to solve this frustrating problem.

  Hi Knitter507,

  Try to do a hard reset as described in the following link.  Click here

  If that doesn't help, can you print a printer status report and give me the a.) Product # and B.) Version of the firmware of the printer?  To print the report, press on the arrow to the right on the screen of the printer control and then configure / reports / Printer Status Report.

  What is the operating system for your computer?

  You are able to make a hollow photocopy the ADF?

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• question on the layer effects and filters - Jews Becker

  Hello

  I have a question about the layer effects and filters

  first is there a way to layer effects in flash (as in photoshop 'coup' "outter glow" etc...)

  so it is a kind of plug-ins to special effects - perhaps with particles or pretty effects that I can buy

  Thank you very much!

  (as you may have guessed I'm very new at this and appreciate all the advice I can get!)

  -Jews Becker

  You won't find anything exactly like filters in Photoshop for use in Flash. There are filters in Flash. They are available at the bottom of the Properties window for an object MovieClip or button on the stage. Alternatively, you can apply and animate a filter in Actionscript. There is a good third-party developer, http://www.greensock.com, where you can find a few effects tools very useful. Most are free.

• OfficeJet 8500 more scanner not found, the printer works fine. Windows 7 Ultimate 64 bit

  I had to remove the drivers and the software once.  I have re-installed, but now the printer works fine and when I try to run a scan of the computer or the printer they don't know each other and I can't scan.

  It fixed...  I had asked a computer specialist to look at and he cheated by creating IP port and tell the PC to print via the port.  Although the sweep of the network was suspended on that port.  Installed the printer via a USB cable and then removed from the printer and reomved first which stood on the IP port.  Once it is I installed the printer again and scan network found the printer immediately and went big.

• HP Officejet 7310 all-in-one: on the printed page without is not the margin settings and are shredded

  During a few days ago only, printer started the show message paper jam when the printed page was all but probably 1/8 "already out.  Flicking the paper really brought the page on the rest of the way.

  I remove the paper two-sided accessory to find any paper, but there is no paper jam that I can see.

  Also, in the middle of printing, sometimes it makes a loud squeaking (I guess), but kept in printing and sends the page completely.

  Then I started to notice that the left margin could tilt inward I look towards the bottom of the page or it can be different from one Word page to another and a blur occurs in a word here and there.

  Finally, on the printing of Excel pages, I see a different left margin on what I consider every 2 lines.  This, of course, affect the right margin in the same Manor, and the vertical cell lines also vary according to the variation in the left margin.

  The HP software tells me there is no update for me to download.  However, I do know she never talked about everything.  I have not seen this specific problem listed.

  @Sunny-Gal Hello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I suggest to remove the cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

  Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
  If someone has the original settings, I would be grateful for any help.

  Derek has soon

  Hello Derek

  Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.