HP Officejet Pro K5400 print extra page after each print job

I've updated HP software version 2.16.1 on my version of Mac OS X 10.7.5. After the update of the printer still prints an extra page after each print job. This delays the work according to the printer, because the printer flashes for about 5 minutes, then prints extra page and there always several 2-234 X. Don't know how to solve this problem, I already checked that the software is up to date. Is it possible to go back to a previous version of the HP update until a solution is found?

Hi kajuntwin,

The patch is now available, you can install it from the following link:

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-126392-1&cc=us&DLC=en&LC=en&OS=4159&product=1146331&sw_lang

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • HP officejet pro k5400 print hieroglyphics from my computer windows 7 when network attached so

    my HP officejet Pro K5400 to print hieroglyphics from my computer windows 7 - both when attached USB or Network attached.

    It was printing fine before when network.  has taken a different and trendy site via USB and has not printed correctly since.  Printing a test page for the printer itself works fine.

    Help.

    It's strange.  The driver may be corrupted.  Try using a different printer driver.  You can find the instructions below. Let me know what happens.

    1. Click on the start menu.
    2. Click devices and printers.
    3. Right click on your printer.
    4. Select the properties of the printer.
    5. Click the Advanced tab.
    6. Click new driver.
    7. Click Next.
    8. Select HP in the first list.
    9. Select Deskjet 990c in the second.  If the 990c driver is not there, use the Deskjet 450 driver.
    10. Click Next.
    11. Click Finish.
    12. Click on apply.
    13. Click OK to close the window.
  • HP OfficeJet Pro K5400 print is Cyan and yellow all of a sudden. Help, please...

    OfficeJet Pro K5400 Cyan and yellow just stopped working at the same time (very strange).  I have read almost every post and tried almost everything including diagnostic tests that show that all is well (via the keys on the printer), test and all the other available tests in the manual of HP cleaning several times.  The diagnostic test shows no problem and brand new and full cartridges to max.  However the diagnostic characters shows that black and Magenta, but no Cyan, yellow or any other color.  I took out the printheads, cleaned connectors, soak the heads and everything else you can imagine and not luck. I need to have finished the power and "hard reset" on a dozen times.  I can't imagine that two printhead (cyan on a yellow on the other) has just decided to die at the same time.  I can't be driver/software related because I did the tests directly from the printer.  The only thing I can think is maybe cyan and yellow parched when I took out the cartridges at staples with me to reference.  All cartridges have been taken out of the printer for 2 weeks or more.  Any thoughts?

    Ouch - two weeks with the cartridges removed probably allowed 'plumbing' between the cartridges and printer to dry and clog.  If the print head and cartridges were never removed and it is also possible for the tubes to drain and air to block channels of ink.

    You tried to clean the printhead a couple of times, I suggest three levels of cleaning in the sequence of head running.  Each level of cleaning up to three will be a more energetic cleaning.  You have probably already found the Troubleshooting page here.

    Scroll down this page and click on the + to expand the Windows section, then scroll down to the section on executing a cleaning of the Control Panel, click on the +.  It is said:
  • Officejet Pro K5400 printer - no solution center or equivalent on MAC

    I have a new iMac running OS x 10.9.3. During the process the K5400 printer in network has been found, drivers downloaded and everything seems to work fine. However there is no center of Solution being present on my Windows system, and if there is a HP Applications folder on my Mac, I can't find. I used the Solutiuon Center to check the ink level and other things.

    Question: is there a center of Solution for Mac and if is not there and equivalent and if not (one might wonder why not!) How to find things on this printer from my Mac, not having to go to the porinter in another part of the building.

    Thank you in advance for an answer!

    I found the answer to this problem, I asked. Apologies for experienced Mac users who I am sure that already know such things, but as a new convert Windows I don't have and this info can be useful similar folk.

    Click on Preferences system-> printers and Scanners-> the listed HP printer you want information on-> them status will take you to a set of options that will do everything that was available in the HP Windows solution Center.

    It is excellent and can work for another fact of printer--I know I do not have!

  • Officejet Pro 8610 print job placement

    Hi, we just bought Officejet Pro 8610 for our company mainly to print our shop with sticker address dilivery Bill quickly. We tried 2 Canon printers cheap before hand, but they had a few months.

    I had to adjust the model based on the new hp printer but it is still not properly position on paper. The space at the top of the page, prints out randomly and down do not repeat accuretly enough.

    Frustrating, it's the guns good markets had no problem with that precise in a 2 mm. IWe are struggling to get a precision of 10mm with this professional printer.

    Any help appreciated.

    Steve

    So, sorry. I was moving the erroneous margins in CSS. @page CSS values worked well and until then. I think spend the sticker box was just page any longer, he moved the next page downwards or upwards depending on the content.
    Once again sorry for your time, waiting

  • OfficeJet Pro K5400 printer.

    I get a light "Empty cartridge" (flashing) Cyan Ink Division even if I installed a new cartridge.  I reinstalled the cartridge several times (> 10) without success.

    I use Windows 7 Pro. with SP1.

    The printer is connected to your PC via a network, no USB cable.

    Well, I solved the problem.  I assumed that the new HP ink cartridge was good, and he was not.  I went out and bought a new cartridge and the ink cartridge came out.  I reinstalled the new original cartridge and the ink light began to Flash again.  Reinstall the latest cartridge (bought today) and the light went out.

    Once again, thank you for your help...  Drop this solution in your archives, will appear again with someone else.

  • K5400 prints the alignment page after each document

    I have a HP Officejet Pro K5400, which insists on an alignment page printing after each document.

    It's on Windows XP Pro SP3, if that makes a difference!

    I've tried everything I can think of to clarify this, but he persists.

    I know it's the printer, I moved and installed on another PC, and the error moves with the printer!

    Can someone tell me how to stop this, as HP don't seem to know!

    Message edited by JimW on 22/12/2008 08:26

    Excellent!

    Installation of new heads, (both for security), sorted!

  • My HP Officejet Pro L7680 print a blank page before every PDF print job

    My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

    Hello @RMorley,

    Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

    There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

    1. go to your devices and printers

    2. right-click on your JO L7680

    3. navigate to printing properties

    4. click on the Advanced tab

    5. click on the Separator Page

    It was empty or was there something put there? If something is listed here please delete and apply the changes.

    If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

    The PSDR find something, let me know the results?

    If you still print the extra, please check the size of the paper, that is - this currently fixed at?

    Please let me the following information if you still get the blank page before prints:

    1. What is your current operating system, Windows or Mac and what version?

    2. What is the connected printer, USB or wireless?

    3. If you print from the internet or e-mail you get the blank page or documents?

    Thanks again,

  • HP officejet 6000 prints the alignment page after each print job

    HP officejet 6000 cb051

    Vista 32

    a technician had me remove and then reinstall the driver, I thought it helped, but it didn't so I reinstalled the driver from the web page and that did not help either

    My printer prints an alignment page after each print job.

    I used my call free support to resolve this issue, and I thought it was fixed, but it isn't.  I checked the manual and there is no information there.  I have no idea what to do next.  Someone at - it any help?

    Susana

    susana1027

    The alignment page will print until it completes successfully.  Try print a page of diagnosis as on the Six Solution on this page. Do all color printers correctly?  The alignment will fail if the parties in black and color do not print correctly.

  • inside printing with HP Officejet Pro 8000 prints pages out of order

    When you print a 3 page document with my printer HP Officejet Pro A809a print 'two-sided' setting, it prints page 1 to page 3 on the back, then page 2 on a separate sheet. How can I get the printer to print documents duplex in good condition?

    Hello

    You can check the printing preferences and duplex settings, see if you can change the order in this way.

    Set printing preferences and print

    1. In the menu file printing program, click print .
  • How to stop the printer printing an extra page after that I have print something, with getting http: /h10141 on top

    How to stop the printer printing an extra page after that I have to print something, with mGET http: / h1014.www1.hp.com/pup/inkjet/updates/va/mamifests/b_bu_c_p00_348e88c

    Host: h10141.www1.hp.com

    Accept-encoding: identity; q = 1.0 *; q = 0

    User-Agent: HP - inkjet ink-WebUpdate - 1.1

    printer

  • OfficeJet Pro K5400

    First of all, I thank very you MUCH, for this day for free help!

    I had my Officejet Pro K5400 for several years.  Great performance.

    I am on Windows 7 and Office 2010.

    About 2 weeks ago, I started having bad print quality.  Read my manual and got to the line for the tips of the latter.

    Replace all color cartridges.  No improvement.

    Has replaced the two print heads.  PERFECT! ….. for 2 days.

    Walked to the office this morning and the two printer lights are flashing and the green power button.

    Got online and went through every process of HP solution to

    http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?spf_p.TPST=kbDocDispl...

    No improvement whatsoever.

    I read that some issues may be related to Printer Spooler, but I don't know anything about.

    VERY discouraged after spending so much on the new cartridges and print heads.

    I have my original printer software installation disc.

    Hope you can help.

    Here is the info on my printer scan software HP of my hardware.

    Results of the HP product warranty

    The following information has been returned for your product

    Serial number

    MY87N680KT

    Product number

    C8184A

    Warranty status

    Warranty has expired

    Date of end of warranty

    (YYYY-MM-DD)

    Interesting (loan of four another printer cartridges and don't see any printing).  It would make sense to me and I know that I wouldn't think about a problem connecting microsoft HP.  I'd be inclined to think that your printer, independent of all cartridges, got stuck trying to talk to the cartridges.  You could put the four cartridges borrowed from the other printer, then try to send the image of the diagonal lines on the printer, I hope everything will work correctly.  If Yes, then I would work on your printer, not on the cartridge (more correctly, the combination of the head of printing/tank) but on the points of contact on the printer that connect to the cartridge.

  • FIC Ip HP Officejet Pro K5400

    I'm helping friends with their HP Officejet Pro K5400, which is connected to a router that cannot use fixed IP addresses. Is it possible to set up a fixed IP with the printer?

    We will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can change the DHCP of the router range using its internal settings page.
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • OfficeJet Pro K5400 - loss of functionality in Windows 7

    Since the upgrade of our PC from XP to Windows 7, we have experienced a huge loss of functionality when printing our of Officejet Pro K5400 (cannot print to the edge of the pages, can not specify substrates, change the resolution, etc.)

    Our HP reseller from whom we bought the printer actually just washed their hands of this issue "that's the way things are, HP are better than many other manufacturers to provide drivers for the existing hardware, update of the operating system".

    It seems ridiculous to me that HP will feel it is reasonable to not continue to support relatively recent kit parts that work well - just another example of built in obsolescence? Is there a way we can restore the missing feature? How about you, Vista driver - is that have relevance?

    Come on HP - standing behind your product and we restore the characteristics that we need to make this useful printer once again!

    This printer driver must be included in Windows 7 already.

    Here is the document that I found for your printer when I was looking for the drivers:

    http://support.HP.com/us-en/document/c01874725

  • OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

    Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

    This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

    The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

    Not very well where to go with this, help please!

    Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

Maybe you are looking for