HP officejet pro k550 will not print a test page using the printer buttons.

Similar Questions

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• HP Officejet Pro 8620: HP Officejet Pro 8620Print will not print oversized envelopes

  I thought I had followed the instructions allegedly simple re plug my new printer HP Officejet Pro 8620 in turn. Something to do with the connection via ethernet? I plugged it with a money USB cord.

  Then, when I tried to print something printable HP, the site does not recognize or find my printer.

  I also can't seem to print envelopes of various sizes. The instructions to keep your printer drivers on the evolution of the saying.

  Can you please help? The saleswoman of Staples said it would be easy. HAH!

  Thank you for your time and let me ride my rants. I enjoy your site and it.

  Hello

  HP pads are only available in the network connection, and no USB connection.

  To connect the printer to the network yoru connect it to your router wirelessly or through an Ethernet cable to any of the router LAN port, then you can activate printable HP.

  You must reconfigure the printer by opening the HP Officejet Pro 8620 software, and then click the utilities tab.

  Click Printer Setup and software and follow the steps to connect to a network printer.

  To set a custom size support size envelope follow these steps to configure the size within the confiugration forms your system, then the size configured support will be available in the print driver.

  You can follow these steps to set a medium size custo:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5367613/document/c03890386/

  Note that the printer supports a size order of 76 to 216 mm (3.0 to 8.5 inches) wide and 127 to 356 mm (5.0 to 14.0 inches) long. any value higher or lower is not supported and is not listed by the print driver.

  Shlomi

• OfficeJet Pro 8210: Officejet Pro 8210 will not print - need to finish the setup message

  I have installed, implemented the 8210 OfficeJet Pro, HP Universal print driver HE managed mode, installed ink cartridges and printer alignment sheet printed.

  I plugged it in via USB, and the system set up the printer correctly.  I went to print a test page and the printer displays the following message:

  'To print, you must complete the installation.  Press OK and follow the instructions or choose? ».  I press OK, but nothing is displayed, it just goes back to the main menu and the help screen is useless.

  I can print reports in the menu of the printer very well, it will not just print the system Windows 10.

  I've implemented 8 of them exactly the same way with no problems.  I think I can try free managed mode.

  Does anyone know how to reset the printer to factory specifications, so I can restart the entire process to help self-directed mode?

  I took a cat with HP to solve the problem yesterday.  We had to install the full version of the software rather than the base driver.

  It's strange because I had a different Pro OfficeJet 8210 on my work system a few days earlier by using the old driver.

  In any case, it worked, so the problem is solved.  Sorry for without closing the post earlier.

• Now my HP Officejet Pro more will not print Photos or anything else!

  Here I am once more.  I finally solved the problem that I had been downloading the software for my HP printer after that I downloaded Windows 10.  I could not download any software without getting an error message 'download cancelled '.  I was able to print pictures and letters typed with WordPerfect X 6.  I'm embarrassed to say that I accidentally fell into the solution and now I can scan, send faxes again.  Yay!  Problem is NOW, I'm more able to print photos, or anything else!  I go through all the motions and send the message to the printer to print, but nothing happens.  I have already run the hppiw.exe and configure the printer.  When I try to run the HPPSdr.exe, he unzips the file, the printer appears as "installed" and click on the 'Next', I get a screen with 3 different ways to connect the printer to my computer - I choose USB because it'S the way I was connected.  Then I get a message telling me to do that my printer is on (it is)!  and try a different USB port (I have) or try another USB cable (I HAVE!)  OK, so FINALLY I get to the point where I am able to print on a HP Officejet Pro 8600 N911g series Print Page of Diagnostic quality, AND DOES IT!    But I also know there is a problem with the software and I need to uninstall and click the Support link and the Driver to download new software.  But when I click on the link, I'm told I'm not connected to the internet - here we are again.  I'm exhausted.  I am 65 years old and I've been at this for 96 hours.  I've corrected the problems of scanning, but now I can't print while yesterday I was able to do it!   Arrrrggggghhhhhh.

  Can someone tell me why I get the message 'not connected' when in fact I AM connected to the internet?  sigh/smh

  Hi @Galego,

  Welcome to the HP Forums!

  I see that you can not print with your HP Officejet Pro 8600, on 10 of Windows, and I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Then, run the HP print and Scan Doctor to verify that everything works.

  I hope these steps help!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• My blue ink in HP Officejet Pro K550 does not print, even though I tried to put in a new cartridge.

  My Officejet Pro K 550 printer, has lost its ability to print blue ink, but I tried to change the cartridge. Other colours and black work well.  Can you give me any advice as to what may be wrong?

  Hi Linda,.

  I found some of my colleagues who have worked on this printer. There are some things to try, however, it is not all good news.

  The engineer estimated that on the print head nozzles may be clogged for 2 reasons. The first is that there is only some residue ink. Here's what he said: "perhaps you can suggest to the customer to try to remove the print head (just the print head which has cyan nozzles), use a cotton pad or damp cloth to clean the residue of ink around the nozzle. Replace the printhead, and then do the cleaning sequence that the manual says. This procedure might be able to recover some scenarios of nozzle clog, but he's going to use up little ink. »

  However, it may be that air took the print head: '. '. If the print head is deprimed, that means air penetrated in a certain room after turning on which can never be purged, causing not able to sink more ink. In these cases, I think that the print head should be replaced. »

  The engineer also spoke with assurance of customer, who believes that this particular product is past its end of life, which means that it is technically longer than Hp designed to operate. I know that you only had 3 years, but you want to be aware of this.

  Karen

• HP officejet pro 6830: will not print in color

  I just bought an officejet pro 6830 e al. in a printer and I can't seem to print in color. I can copy in color by manually typing the colors and all my test prints out ok too. I even tried to clean the print head.  My operating system is a Mac OS X 10.11 El capitan. Can anyone help with this problem.

  @mzacc, welcome in the community of HP,

  I saw your post about how you are unable to print in color, to your Officejet 6830 and I wanted to share my own suggestions with you. See the link and the steps below and judge. You should be able to print in color later.

  • Click on this link and try all the steps: color or black cartridge isn't printing
  • Here are some other suggestions, I have to try the Mac:
  1. Reset the printing system
  2. Restart the Mac.
  3. Download and install the complete driver: e-all-in-one HP Officejet Pro 6830 Printer series full feature software and drivers
  4. In addition, to download this driver: HP v3.1 for OS X printer drivers

  Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

  Have a nice day

• OfficeJet Pro 8620 will not print duplex

  I use an iMac and OS X v10.10. I can print duplex when I'm on the web using Safari, but when I'm offline and want to print from Acrobat, Word, or Excel, I can't - there is no option for double-sided printing in the print dialog box. What gives?

  Hello
  Please follow the steps below to automatically print double-sided print jobs:

  Open the file used to print, and then click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized. Click Show details to see all the available parameters.

  Open Adobe Reader print dialog box, then click the printer... button. the complete system shown print screen will allow other parameters such as printing duplex, bureau skip this step...

  Click on the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  Select layout from the drop-down.

  Set the duplex option as the binding edge (Portrait) Long or short edge (landscape) bond.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Kind regards
  Shlomi

• HP officejet pro 8600 will not print documents

  Printer is set up with Wi - Fi. When I try to print documents system does not see printer, even if it appears as a device in the Control Panel has Windows 7 Home Premium.

  Hi Tombuck,

  I see that you are having problems with your printer.  I would try to help from Hp print and Scan doctor.

  HP Print and Scan Doctor

  Let me know how it goes.

• HP Officejet Pro K550 will not appear in Snow Leopard 10.6.3

  When I try to print, I get an error message. I installed the new software of the printer from the Snow Leopard 10.6.3 install disc as the software on the HP site is only 10.6.2. Printer is ready but-mistake.  Printer was a network of airports on an old computer running Panther, now connected via USB to a MacBookPro upgraded to OS 10.6.3. I'm so frustrated I could tear my hair out!

  The printer is connected directly to a MBP or shared between both of them?  I'm a bit confused on this point.

  Your printer isn't a K550 plain or has he the ability to network (the K550 has a dtn suffix or such)?

  Do a software update, and then reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

  I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

  Hi @thrandall,

  Thanks for getting back to me.

  My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

  Have you tried these steps in my previous post?

• My HP Officejet Pro Wireless is not printing black even with a new cartridge.

  My HP Officejet Pro Wireless is not printing black even with a new cartridge.  Help!

  Hello

  Of course check that the cartridge is very savvy.

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet Pro 8500 will not send or receive faxes

  HP Officejet Pro 8500 will not send or receive faxes. 'Run Test Fax' indicates that everything passes.

  Then see HP support pages for your model, its their equipment & the fax is independent of the victory

• OfficeJet Pro 8620: Officejet pro 8620 will not be printed by RDP

  We have a new OfficeJet 8620 Pro that we have just set up in a remote office. The user connects via rdp and vpn to another office in our network. When we connect it cannot print. I installed the drivers on the local destination computer. The printer prints from two computers as well. "Through RDP the print job is sent to the computer local and drtops but I get an error Windows 372, printing Service:"

  The Remote Desktop redirected Printer Doc document, held by xxx, failed to print on printer HP Officejet Pro 8620. Try printing the document again, or restart the print spooler.

  Data type: RAW. Spool file size in bytes: 285662. Number of bytes printed: 131072. Total number of pages in the document: 1. number of pages printed: 0. Client computer: \\LOCAL_PC. Error code Win32 returned by the print processor: 2147500037. Unspecified error

  I tried to uninstall and reinstall the drivers and the printer on the computer the remote and that has not worked. I found this: http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4aa0-8465enw&404m=secure-erc

  It seems to imply that the 8600 series need another type of driver but I can't find the driver that he needs.

  Any help would be appreciated.

  You can resolve this problem by installing the driver Laserjet 6980 on your print server as an additional driver for your printer.