HP Officejet Pro L7590 printer automatic feeder no longer works

Similar Questions

• OfficeJet Pro L7590 - printer skips print complete lines of black ink intermittently.

  My Officejet Pro keeps intermittently jump lines of black ink when I copy or print a document. There seems to only be no trend as to where on a page, the line jumps from print.  When initially, I replaced my B/Y printhead, the problem seems to have stopped and the pages seem to be printing OK. But after a day or two, when I want to print or copy another document, the problem reappears.  I also replaced the black cartridge (twice), the problem still exists.

  I love this printer because, when he's not working, it prints and copies of documents with excellent speed and clarity.  I don't want to spend another $ 200 dollars for a replacement HP printer or an excessive amount for the repair of the existing printer.  Any suggestions?

  HI - try after the steps described in this document (if you haven't already done so).  It should help narrow down the issue.

  Hope that helps.

• HP Officejet Pro L7590: HP Officejet Pro L7590 printer CANNOT PRINT but can browse the all-in-one software

  I lost connectivity for printing service about a week ago. Maybe it's me trying to add an older HP Cad printer plotter to my selection of printers.  So, based on the recommendations of HP:

  1. I uninstalled all drivers of HP and my pc software (all-in-one)

  2. He unplugged printer HP

  3 - reloaded HP drivers and software on the site of HP (all-in-one).

  4 - connected to the printer.

  I did several times. Together with network using ethernet cable connections as well as direct USB cable to the printer.

  Results:

  1. I can't print all the al.  either through the ethernet connection or via a direct usb cable.

  2 - However, I can scan, fax via the software on my PC HP solution Center

  3 - the printer itself is fine because I can print using the other PCs on my home network.

  So, I tried everthing I can think.  There are configuration, etc. think I cannt understand that my PC keeps me from printing.  Help, please.

  Hi flyfish08,

  Thank you for your answer!

  • Uninstall the software. Uninstalling the printer software.

  • If you are using a USB connection. Unplug the printer USB cable.

  • Clean boot the computer. How to perform a boot in Windows.

  • Disable all Antivirus programs. Disable Antivirus software.

  • Disable all firewall programs. The WF of end-to-end.

  • Create a new user account. Management of user accounts and connections (Windows 10).

  • Connect to the new user account.

  • Reinstall using full feature software and drivers. (Wait for the software to tell you to plug in the USB printer cable).

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that these measures will help!

• HP Officejet Pro L7590 all-in: HP officejet Pro L7590 prints 1/2 of the line of text on several lines of the document

  I received an email for the diagnosis of the printer and I was prompted to install the updated drivers and I did it and now when I print the test page, I get several lines of text that displays only the top or the bottom 1/2 letters across the page, I printed a self-test diagnostic Page and printed everything in pink , but it does not print 1/2 letters across the page as a test page, then I printed a page of print quality and it did the same as the test page and it does the same thing as the test page, then I tried calibrate spacing of thought which may fix the problem but does not , what can I do?

  Irven

  Hi mmcmret8,

  Thank you for your answer! It is possible that the print heads may need to be changed, at this point, I would recommend to you please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Best regards!

• My Officejet Pro L7590 prints with lines across the copies? How to fix?

  Printer has run fine until lately.  Now it has lines across all copies printed.  Computer running Windows XP.  Both are uTD on software...  Tried cleaning with air presurized Copier, but made no difference.

  I can fix thins, or must it technician?

  Hello

  This article seems to cover the problem you are experiencing. Give the steps described a try and tell us if it helps.

  Good luck!

• OfficeJet Pro L7590: Impossible to uninstall/install drivers

  I read the other posts on this problem without success.  When I try to uninstall the software from my computer hp not using the 'L4 Uninstall_", it hangs to 10/12 every time.  I tried to uninstall it in safe mode, nothing works.  When I tried to reinstall, it would fail with no error message.  I went in the observer of events, and here is the result:

  The failing application name: hpzscr40.exe, version: 14.0.304.0, time stamp: 0x500689b6
  Name of the failed module: KERNELBASE.dll, version: 10.0.10240.16384, time stamp: 0x559f38c3
  Exception code: 0xc00000fd
  Offset: 0x00000000000238fe
  ID of the process failed: 0 x 440
  Start time of application vulnerabilities: 0x01d11d462ec05174
  The failing application path: C:\Users\Username\AppData\Local\Temp\7zS434C\setup\hpzscr40.exe
  Path of the failing module: C:\WINDOWS\system32\KERNELBASE.dll
  Report ID: d1ae1651-131c-4d83-af6d-8e20d6369653
  Faulting full name of the package:
  ID of the failed package-parent application:

  I was finally able to install the software after using my revo uninstaller pro, and go to all the places I could think of, where would be the hp software and following the "resolved" here positions.

  Hi @helpme9,

  Welcome to the Forums of HP Support!

  I see that your experiecing problems get the HP software for your HP Officejet Pro L7590 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you must be frustrated at this point, sometimes, older versions of the HP software can be tricky to remove and reinstall.

  Generally, we use the Uninstaller.exe L3, which is the built-in cleaning brush.

  Have you received the error message "the system cannot find the specified file" (hpzprl40.exe)? This error can be difficult to solve.

  Please follow these steps in the order presented.

  Clear the temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type%temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin.
  • Download the drivers here. do not run the Setup program.

  Does a L3 uninstall:

  • If you use a USB cable between the printer and the computer connection, please unplug the cable now.

  1. click on the Start menu

  2. in the box "search programs and files" type folder and press enter on your keyboard

  3. when the Temp folder opens, find the file 7z. It comes to your HP Installer package.

  4. click on the 7z folder to open it. He will not have the same folder name 7z like the one shown in the picture below, but will be similar.

   

  

   

  5. when the folder install 7z opens, click the UTIL folder to open it.

   

  

   

  6. click on the CCC folder to open it.

   

  

   

   

  7. Finally, scroll down and find the Uninstall_L3 file. Double left click on the file Uninstall_L3 to launch uninstaller of level 3 Please follow the prompts on the screen to complete the uninstallation. Restart your computer if prompted.

   

  Once level 3 Uninstall has completed successfully, please proceed to the next step.

   

  Run CCLeaner: 

  Then, I'll have to run a CCLeaner to make sure that no malicious files not present on your computer that may interfere with the installation. Can I have it please click here to access the CCLeaner. Once the site opens, select the free download button at the top. Once the download is complete please perform the Scan. It would take several malicious files find you might need to run the free Scan a few times to eliminate all that. Once completed the CCLeaner, please proceed to the next step.

  • Restart the computer.
  • Download the drivers again and install. 

  If the problem persists, please try to unlock the hidden administrator account.

  Unlock the system hidden administrator account:

  1. Type your menu keys Windows or start and in the box "search programs and files", type CMD
  2. CMD will fill as a search above, option just right click on it and "run as administrator"
  3. Once opens in CMD (command prompt), type net user administrator / Active: Yes and press entry
     on your keyboard
  4. Next, close CMD, then restart your computer
  5. When your computer is on the newspaper in the new account which should show. It will be called administrator , and you have a password on it.
  6. If your computer automatically connects to your account after reboot to go into yourStart menu, click the arrow next to 'shutdown' and choose 'switch user'. Now log in the administrator account.
  7. Under the administrator account, please click here to download the package full feature software and driver of your printer.
  8. Once the download is complete, follow the instructions on the screen to install your printer
  9. Once the installation is complete, please open the software of HP Solution Center to confirm now it, the scan software opens and works correctly
  10. If software HP Solution Center now works very well, please log out of the account administrator and return to your normal user account.
  11. Under your user account, the full-function software package and the printer driver must show completely installed. Please click on the HP Solution Center icon to confirm if it always opens correctly. If HP Solution Center opens very well please run a test scan to confirm functionality.

   

  If the HP Solution Center software works very well, you need to hide the administrator account.

   

  Hide the system administrator account:

  1. Go to your Start menu or press the Windows key and under the box "search programs and files", type CMD
  2. CMD will fill as a search above, option just right click on it and "run as administrator"
  3. CMD (command prompt) opens, type net user administrator / active: No. and press enter
  4. Next, close CMD, then restart your computer

  When your computer turns on it please test the software HP Solution Center again to confirm that everything works again according to normal.

  Posted by my colleaque X-23.

  References: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Solutions-Center-will-not-open/td-p/5117... and http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-ENVY-5640-new-does-not-work-Install...

  In addition, here is another document explains how to fix this error message: how to solve the problem of ""the system cannot find the specified file "."

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro L7590 cannot find the printer in the basic facilities and full.

  The HP solution center software has stopped working recently with my Officejet Pro L7590. The printer is connected to a wired network.  I uninstalled the software, downloaded the latest software to install driver from HP.com.  The operating system is XP. I tried to install the base and full versions of the software several times, do a full uninstall/scrub every time.  No package can find the printer.  I ran the residential network Diagnostic tool and it can find the IP address of the printer very well.  I can access the web page to printer very well.  I've successfully installed the drivers of the company and I am now able to print.  I then tried to reinstall the full version, and it would still not find the printer.  Another pc on the network is the center of Solution HP software installed and communicates very well with the printer. I tried to disable firewall Eset Nod 32 during the install and no change.  I deleted all the entries in the registry I can find for HP, but still can not get the full version of the installation of the driver to see the printer.

  What else can I try to succesfully reinstall the driver package?

  Sorry, you gave the wrong way...

  First of all if you still have Enterprise installed download and important work!

  1. uninstall all other instances of 8.3 or previous.  My recommendation would be to uninstall all software printer hp through Windows Add/Remove Programs if nothing else to start with a base line.

  2. download the Utlities "HP Software Removal Utility - IT professional use only" (don't worry, this stand-a-alone also works on computers). File name: OLProL7X00_Scrubber_8.exe

  3. Once you unpack the latter you will have a new window and down there are 5 files, you must run one at a time in this order.  Uninstall.bat, Unistall_L1.bat, Unistall_L2.bat, Unistall_L3.bat, Unistall_L4.  Make sure that each of them is complete before you begin the following.  Some of them open and close Windows Installer UN and there is a gap of about 10-15 seconds.  Some of them require you to press any key to close the window on the finish.

  4 REBOOT

  5 download if you don't have not already ch from the Solution of Driver - company it, basic features of HP software/driver-IT Professional use only (again it is ok, you want your scanner, printer, monitor, and HP Solutions software to work once again don't you?).

  6 install the filename Business Solution: OJProL7X00_enu_Enterprise_7.exe if you uninstalled all this will install without a hitch, but you may need to input manually by selecting the IP method, enter the IP address of the printer. It's where he then found my network printer, and he continued the installation.  Mine found via the method of IP but not automatic.  Finish the installation and give your computer a few minutes to finish in the bottom.

  7 reset.

  8. If you have a program that uses a scanner TWAIN as Adobe Professional, CorelDraw, etc. test your scanner.  Mine works now.  Leave the test program,

  9 download new version 8.3 software, the full version of all the 311meg of it!

  10. install this software 8.3.  You can get an error (I did) just do not send the report, but the key is the continuous software to install.  What the problem is that the software company alreadly installed a files "hp? 5. ?? "and the cant on write.  The amount of the fine. Now when you get to the point where he asks how you connect your printer, USB or wired/wireless select Wired and click OK.  This will bring you to a new screen that is simular to the last, but to the bottom is a checkbox with "continue with the installation, I'll add the material later.  Put a check mark in the box and click Next.

  Surprise! the Setup will continue installing all recommended software and complete.  Still finished once that there is still things going on in the background! then give him a few minutes to complete!

  11 restart and give a little time and you will see that the screen is the network printer and all software programs now work.

  12. the only thing I don't understand is this: the old software used to create printer drivers 2, one for the printing of paper and other fax directly in applications.  The fax printer driver is no installation/configuration in this method, but I think that the Technical Support HP can guide you through this set up if necessary.  I'll do that tomorrow as it was something that I never thought or missed until it didn't work!

  I hope this helps! It did for me!

  Joe

• HP Officejet Pro L7590 all-in -: print to the location of the file

  I have a HP Officejet Pro L7590 all-in-one printer.  It has recently been make me save a Web document somewhere (like my office).  Only then can I print a document from there.  Recently I was talking to someone about this and they said to try and find the option "Print to file" because it could be activated, so maybe that's my problem.  Does anyone know where this option "Print to file" is so I can try and get it printed as before?  If I go to a regular Word document, it prints very well.  Help!

  Once clicking on edit you should simply select the listed HP Officejet Pro L7500 series icon in the list, then you should be able to print.

• OfficeJet Pro L7590 can print but not scan

  My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

  • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
  • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
  • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
  • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
  • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
  • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
  • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

  I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

  It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

  I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

  Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

  Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

• HP Officejet Pro L7590 and printing software Mac Yosemite 10.10

  I installed my Mac to a mew 2014 MacBook Pro with the retina and Yosemite 10.10.1.

  I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (the lights are on). What software download to install the printer? Is it not available for Yosemite yet? Where is it located? I guess that its not available to Yosemite yet? I don't have the original software. Thank you.

  Hi @rustyblue,

  Welcome to the HP Forums!

  Currently, it there is no full software features and drivers directly through HP for Mac OS X 10.10 for this printer model. However, after some research, I found this driver directly by Apple. HP v3.0 for OS X printer drivers.

  If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and another printer, these steps will work on 10.10 as well for your printer.

  I hope that helps you get up and running, please let me know if you have any additional questions!

• OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open.

  Hello

  OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open. How to fix Ica?

  Operating system is windows 7 but I do not connect to the PC again

  Please Help me ASAP

  Concerning

  Check the document I linked below. Let me know if it worked or not.

  http://support.HP.com/us-en/document/c01626835

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• HP Officejet Pro L7590 all-in-one printer (prints half of the pages &amp; gibberish)

  My HP Officejet Pro L7590 1.5 year, all-in-one has decided he wants to print a half pages & then gibberish or page 1 of a document of several pages & then turn the remaining blanks pages or gibberish.  It started about 3 weeks after a Windows Update (I do not push this update because this may just be a coincidence).  I rolled power computer & printer. I also made sure to have the most current printer driver.  I have uninstalled & reinstalled the unit 3 times now.  I checked the settings of the queue as well.  Initially, the problem seems to happen when I rolled up a job to the printer and then closed the application or document that I wanted to print by going to work on something else (like I always did).  Now, it happens whenever he wants to.  I then delete the pending print job & power cycle sometimes even the printer to act again on the right.  I'm pretty tech savvy - I do IT for our office, unless it is over my head.  What can you try me & this problem?

  If it happens again I suggest to reset the spooler via the command console and then try printing again.

  Start > run > command

  net stop Spooler
  net start Spooler

• HP Officejet Pro L7590 - cannot scan - the installation program does not scan Betacam

  I have a HP Officejet Pro L7590 all-in-one connected to my iMac OS X Lion 10.7.4 running, and I can't Scan functionality.

  When I set up the device, it does not recognize that there analysis ability, if I try to scan from the Preferences/Print & Scan window there is no option to do so.

  Also, the HP utility displays no information on digitization.

  When I try to run Scan Manager device HP HP Scan Pro application opens then immediately crashes.

  I tried to reinstall the HP software, but it makes no difference.

  Scanning has worked in the past with the same printer, but not since I installed Lion.

  Suggestions welcome! Thank you very much

  Hello

  The application of HP Scan Pro for Mac OS X 10.4 and 10.5, so it seems you are using older software which are not provided for Lion.

  Please remove completely any HP software installed using the scrubber tool:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  To avoid any problems due to the use of the software, be sure to repair disk permissions before you reconfigure the printer:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Go into System Preferences > print & Scan

  Click on the sign more and select your printer.

  The latest version of the software for your operating system will be downloaded automatically.

  If the software download fails for any reason, download and install the latest drivers 2.9 HP printer:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers.dmg

  Now add the printer by following the steps above.

  Below you can find what scan methods can be used with Lion OS x:

  http://support.HP.com/us-en/document/c01910186

  Kind regards

  Shlomi

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.