HP Officejet pro l7680 - paper jam error

original title: HP Officejet pro l7680

Guard gives me paper jam error. I removed all stuffed with material, redefinition and still not stop send MSG does anyone have any suggestions? Says the error is in the area of the print cartridge. Nothing there.

Hello

·          The printer works much earlier?

·          What have the changes to the computer or the printer settings until the problem occurred?

You can see the link given below to resolve the problem.

http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

Hope that information was useful

Tags: Windows

Similar Questions

  • HP Officejet Pro L7680 transport jam error

    When I turn on my printer, I get the following error

    Jam of transport

    Open the access door to print, clear jam and then press OK to continue

    I did what the message suggested, but I have not found a jam so I don't know what to do now.

    I have a HP Officejet Pro L7680 all-in-one printer.

    Thank you!

    [Personal information]

    Hello...

    PLS, click the link below for the resolution...

    Jam of transport

    Hope this will help... =)

  • HP Officejett Pro 8600: paper jam

    I have a paper jam and I cannot fix it after viewing the video of HP.  The paper is visible from the front and after removal of the duplexer.  The book seems to be tightly wound around the roller.  I can't go out fron the front and it's wrapper around the roll, when I look at the back.  Any suggestions?

    Dottie

    Hey @Dottie11,

    I see that you have some problems with a paper jam in your 8600 e-all-in-one printer Officejet. I can help you with that, but it is not a lot that can be done in this situation.

    If the printer is still under warranty, I suggest to contact the HP Support by clicking on this link and fill out the form below.

    If the printer is out of warranty, the best I can do is suggest more strength or cutting paper with scissors. Those who are not HP recommended troubleshooting steps and HP can not guaranteed that they will help with the jam, but it's the best I can do.

    Please let me know the results after following the above. If you clear the jam or come up with a solution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • OfficeJet Pro 8620e ADF jam error after firmware update

    After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

    I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

    This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

  • OfficeJet Pro 6230: Officejet Pro 6230 continous (not of paper) paper jam error

    As soon as the printer powers on it the ink carrier Wizz backward real quick (as he struggles to move) and then gives me a paper jam error (the resume light flashes and error appears on my screen). He did the same thing when I try to print anything (including the status report page).

    When I up the access panel upward (power on), the carrier of ink isn't even move to ink cartridges which can be changed. I try to move with force, but it does not move (if I use more strength, somethings will break). Ink is a bit new, so I don't know it still has ink in there.

    The steps I've tried:

    plugged the power supply into the wall outlet

    roller cleaning

    THERE IS NO PAPER or PAPER PIECES BETWEEN ROLLERS (I checked like 20 times)

    reset the printer

    There is a large black gear coupled to a white average speed on the left side near the bottom of the printer. I manually drove the speed by pressing (rotation) of North (or forward or to the rear of the printer) for a few seconds and once I did that. the ink carrier was able to move as it's supposed to, and I could see the ink. but once the power is back on, the carrier of ink was in the locked position and fights again and gives me the paper jam error.

    I don't have really any troubleshooting documents on the CV online on how to fix a jammed media of ink and clearing paper jams, so I'm out of options.

    It is plugged into USB

    The main problem is the paper jam error.

    I don't know if the stuck carrier of ink is the cause.

    Hi @Comp-Tech.

    Thank you for joining the HP Forums!

    I noticed your post that your printer HP Officejet pro 6230 receives a constant paper jam error. I'm happy to help you!

    Since you did all the steps already to troubleshooting in this guide, A 'transport Jam' Error Messageand this guide, "Problem of tray or paper jam" Error Message appears, as well as the reset of the printer. The next step is to fix the printer / or replaced.

    Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    Best regards!

  • Paper jam error wrong Officejety of HP Pro 8500 has

    I canceled a print on my printer today and its giving me a paper jam that I can't get rid of feed! Ive checked all the forums without success? Please pelase y at - there some brilliant genius out there who can tell me how to solve this problem?   Thanks in advance for all irritable brilliance, you can offer!

    If you experience a paper jam error message it could be caused by a number of things such as dirty or damaged rollers.  I've included a helpful link to a document that could help you.

    Let me know if it helps.

  • All-in-one Officejet Pro L7680 suddenly leaves impression

    My HP Officejet Pro L7680 all-in-one was printing and then abruptly stopped. In the print queue window, it says 'printer ready '. Under the heading "job info", it says "ERROR: / private/etc/cups/interfaces/HP_Officejet_Pro_L7600 failed."

    That's all. No additional inequality at all. I searched online for anyone with a similar problem and could not find anything related.

    Also, as a side note, when the printer was working before, in my Mac toolbar icon was a picture of the black printer. Now when I hit print on a paper, original icon pop up and then converted to an image of a gray printer that does not resemble the printer. Don't know why, but it seems apparent.

    To begin I suggest to remove the software and then reinsert from the link below, these are the drivers up to date and I hope this will solve your problem.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=2512009

    -Spencer

  • HP Officejet Pro L7680 Allin1: Software for HP all-in-One Printer

    I have a HP all-in-one Officejet Pro L7680, and every now and then it disappears from my computer Windows 7 64-bit.  It is removed from the list of printers in any program use to print something, and it has also disappeared from the list of printers and Windows devices.  The center of HP Solutions icon cannot access the computer and gives an error message saying that the printer is not completely installed.  Printing software is always on the computer, in order to reinstall the printer, I have to go through the process of uninstalling all software before installing again from scratch.  I thought I had all the printer installed updates, but there may be something I don't know. I know how to uninstall and reinstall from scratch - I will do now - but this product every two months, and I would like to avoid having to do that later.

    Help or advice you can provide would be greatly appreciated.

    Thank you very much.

    I add this addendum to the message a day after posting the original message in order to provide additional information.  Yesterday, I removed and installed from scratch print drivers.  I ended up having to do this three times.  Each time, I managed to install the complete printer very well, but when I installed updates (directly or in the past), the printer drivers "disappeared" in my list of printers and it was not accessible more programs I need to print things (processor or browsers).  After the disappearance, I deleted programs and reinstalled.  In the end, I chose to not not to install updates because that has caused the printer to disappear.  I was able to print.  However, today when I booted up my computer, the printer was 'gone' again.  I deleted the drivers (using windows 7 uninstall a program function) and I reinstall drivers again, but given the speed at which the printer is missing, I'm not optimistic that this will work for a long time.  I don't know all major changes I made to my computer recently that could possibly cause the disappearance of the printer suddenly occur so frequently.  I get Windows updates each week.  Hmm.    Another note - after installing the drivers yesterday so I could print, I created a "restore point" on my computer.  Today, when the printer was "gone", I tried to restore to the restore point, but the restore process has failed.  That's why I have to reinstall the drivers again today.

    Thanks for any help you can provide.

    Thanks for letting me know.

    Let's start with the instructions I posted, but change a few steps: please do not follow the steps in RED

    1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
    3. Download the software and choose Save as, save to desktop > OJProL7X00_Full_14.exe
    4. Download and install the Microsoft Visual C++ Runtime Error fix
    5. After step 3 and extracted downloads software, open the temp folder, use the instructions in step 1.
    6. Locate and open the folder starting with 7z (example: 7zS2356)
    7. Open the Util folder
    8. The CCC folder
    9. If you have a computer HP run the L3uninstall.exe. If you have a computer no HP run the L4uninstall.exe

    Instead of the procedure described in the reading, please uninstall the software by following the steps in this link: uninstall the printer software Instructions

    Now, you can return to pick them up to step 10 and complete all the steps of the procedure.

  • My HP Officejet Pro L7680 print a blank page before every PDF print job

    My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

    Hello @RMorley,

    Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

    There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

    1. go to your devices and printers

    2. right-click on your JO L7680

    3. navigate to printing properties

    4. click on the Advanced tab

    5. click on the Separator Page

    It was empty or was there something put there? If something is listed here please delete and apply the changes.

    If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

    The PSDR find something, let me know the results?

    If you still print the extra, please check the size of the paper, that is - this currently fixed at?

    Please let me the following information if you still get the blank page before prints:

    1. What is your current operating system, Windows or Mac and what version?

    2. What is the connected printer, USB or wireless?

    3. If you print from the internet or e-mail you get the blank page or documents?

    Thanks again,

  • OfficeJet Pro L7680 print from Windows ME

    I have a few PCs in a network running on Windows ME, and I would get very BASIC printing, connect to a HP Officejet Pro L7680 all-in-One color in the same network. I don't have scanning or fax, only very basic print options. Suggestions how to recover a basic driver?

    Thanks in advance

    Paolo

    All you have to do is to add a TCP/IP printer to the printers IP address port and install the HP Deskjet 990c printer driver included with ME (?). which should help you to print.

  • HP DESKJET 4645: HPdeskjet 4645 paper jam error does not disappear after a clear path completely according to the internet, ask

    HPdeskjet 4645 paper jam error does not disappear after a clear path completely according to the internet, ask

    Hello, @ghlowell,

    Thank you for the update. You can get the serial number of the printer using the HP utility on your computer. You must have the printer software installed to get the same thing.

    Try the following steps to get the serial number.

    • Go to 'Finder' - select 'Applications' - folder Select "HP" or "Hewlett Packard".
    • Now find and open the "HP utility.
    • Click on "device information. Ideally, this should give details of the printer including the serial number.

    Let me know if this helps. Good luck!

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • HP Officejet Pro L7680 All - in - One will not print black

    Original title: HP Officejet Pro L7680 All - in - One

    I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

    Hello

    This forum is for comments on the Forums for answers and you should ask at your
    questions in the Windows Forums for answers corresponding to your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    It also helps us to help you if all the useful information.

    How to ask a question
    http://support.Microsoft.com/kb/555375

    ==============================================

    In this case you should check with HP Support, their documentation online and drivers,
    and ask questions about known issues in the forums of HP.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

  • Paper jam error

    Hello

    Three weeks ago, I bought a HP Envy 7640 all-in-one printer.

    It worked fine until I hit a 'paper jam error.

    I worked through the step by step manual HP full address (cleaned, checked, rebooted etc.) to fix this one, but nothing helps. I'm sure that it is clean and it is / was absolutely no paper left.

    I tried the thinner paper (80 grs.) instead of 90 grs. but it does not help.

    It takes a minute or two and it still gets stuck on the "paper jam error".

    Who can help me?

    Hi @TesvanL,

    Welcome to the Forums of HP Support!

    I see that you are having paper jams on your HP ENVY 7640 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    You did a great job of troubleshooting to isolate the problem. Hand to recommend that you try the procedure described in the guide below, there is probably a hardware problem.

    If the problem persists, I suggest to contact the HP support by phone.

    Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: http://support.hp.com/us-en/contact-hp
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • OfficeJet Pro L7680 AIO: OfficeJet Pro L7680 AIO DRIVER will be available for Windows 10?

    (NOTE: you don't list Windows 10 64-bit under the above operating systems.)

    I have an OfficeJet Pro L7680 AIO running Windows 7.  It has been a wonderful printer.  (I started to work on printers in 1966, so I have some experience with them).  Its quality and reliability have been superb.

    When I "upgraded" to win 8, I found that no driver was, so I bought a new HP AIO, but its controls were so poor and hard to see that I returned it immediately.   Then I returned to Windows 7, a good solid o/s.

    Now, I'm thinking 'redevelopment' of Windows 10.  I had assumed that no driver for my L7680 would be available, but I read somewhere that one became available for Windows 8.1 (?)

    My question is: a driver Windows 10 will be available for my excellent L7680 AIO?   Or do I have to stay on Windows 7 to use it?

    Windows 10 is not quite finished yet, is not clear what will be included.  (Last week there were three versions of the builds on the fast ring.)  The last public version includes a printer HP Officejet Pro L7600 Series driver.

    Page www.hp.com/go/windows10upgrade no details, but said toward the end of July for more information on what will be officially supported in Windows 10.

  • All-in-one HP OfficeJet Pro L7680: it has an internal memory?

    Same question as the last message for a printer differnet model (sorry for what may seem like a question in double - I'm trying just to be sure that I don't cause me a headache later).

    I have a printer HP OfficeJet Pro L7680 all-in-One (FAX, Scan, Print, Photo) I would like to get rid of him.  Before disposing of it, and for reasons of security, I would like to know if there is an internal hard drive that could potentially be storing all I can have copied, scanned or faxed.

    Hello sixmil5and welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you have concerns about the internal memory of the printers.  Memory is automatically reset when the printer is disconnected, so you have no problem with personal information being recorded.

    Thanks for posting on the HP Forums and please let me know if you have any other questions.

Maybe you are looking for

  • Common modules on Windows 7 x 64 and HDMI problems

    Jin1.), I want to run my remote, hotkey utility, and so one on my Toshiba Satellite x 200 - 22v. But... I can't find common Modules for 64-bit (even vista) version, I installed the utility Hotkey for XP on this seven and it works because of the absen

  • Scanner HP PSC 2410

    How can I get my HP PSC 2410 All in One to scan 2 originals in a scan?

  • CHKDSK displays bad index file.

    How can I fix this bad file index. I have XP32 - SP3 - IE8

  • Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

    My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the la

  • New area, the new PIP

    Hello all and thanks in advance for any help forthcoming.  This is my fist post so I'll try to be as concise as possible. We have lack of public IP addresses in the range assigned to the WAN.  Our ISP gave us another 29 subnet.  I ran through the ste