HP Officejet Pro L7780 - network letter nightmare!
I'm hopin that someone can help with a problem I have with my HP Officejet Pro L7780:
The printer is connected to my wireless network and all is fine with that. The problem lies in the letter from the network that it sets itself on my PC (Windows 7 Ultimate) for the card reader on the printer. It uses the same letter as a virtual cd-rom on my PC drive - and I would like the letter use printer - and not the cd-rom drive, as I have my PC configuration in a way where are grouped different types of readers. Is it possible (possibly via the Windows registry) that would allow me to change the drive letter of the network (as it seems to automatically assign them one) and keep it with this new letter rather that interfere with the cd-rom drive and denying access to him every time that Windows 7 starts?
Or otherwise disabling the function of card reader on the printer I do not use it?
Thanks to anyone who can solve this - it's driving me crazy!
I finally found a solution to this problem that works for me.
I too have an HP printer that was mapping its card slots memory on drive Z: every time I start my Windows 7 computer.
To change the map to another letter in order to release the letter Z:, I put a memory card in the printer memory card slots. I then unplugged the drive Z: printers mapping (right-click the Z: drive in Windows Explorer and choose the option to logout).
I then used the "Map network drive" option on the toolbar of Windows Explorer to map the slot for memory card printer to a different drive letter. [You must know the address (or network name) of the printer to do this: name or network \\[printer address] \memory_card (e.g.: \\192.168.1.108\memory_card). This address goes in the 'Folder' dialog to map text box. Make sure that the option "Reconnect at logon" is checked. And make sure you only select a new drive letter that is not necessary for any other thing later. Then click "Finish."
After doing this, the printer has continued to use the new drive letter to start instead of Z:, leaving Z: free for other applications.
I do not think that works above if there is no memory card in one of the printer memory card slots.
Tags: HP Printers
HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?
I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.
The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.
Recently, my HP Officejet Pro L7780 stopped printing. I uninstalled the driver and then reinstalled the driver from the HP website. Every time, when installing, I get a message that "bing bar does not work on this version of Windows. Once the installation is complete, the test page is fine but I can't print from one of the applications (e.g., WORD, Adobe Acrobat, etc.), getting an "Error printing" message, rather than each time.
I use Windows 10. The printer was working fine since I've upgraded to Windows 10 until recently.
I've uninstalled and reinstalled the driver several times as suggested on the HP website. Any suggestions on how to solve this problem.
Hello @AMNYC2015and welcome to the Forums of HP, I hope you enjoy your experience!
I see that you are having errors in the print driver. I would like to help!
I recommend to remove the cartridges ink and starting by a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
I also recommend running the HP Print and Scan doctor.
Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.
Thanks for posting on the HP Forums!
I see I'm not the only one having this problem since the day of security Windows on Janualy 4, 2016. I executed issued alerts here to support.
Basically what happens is that I can open the Solution Center, but when I try to open either Photo or Document scan I get a gray pop saying "The HP Imaging Device was not Found" it tells you so what do I do, but all of these steps have failed.
I noticed something is in the Device Manager, devices for imaging and printers, Officejet Pro L7700 under events, I also have this message.
Devies Imaging ' device USB\VID_03F0 & PID_2312 & MI_00\6 & 36fd2d51 & one & 0000 also requires installation. »
Printers 'device USBPRINT\HPOfficejet_Pro_L7700\7 & 30237294 & 1 & USB001 requires installation."
I'm a complete novice, but for me the finger seems to be pointing to my USB drivers or control. Anyone have any ideas?
Perhaps I should mention the printer works fine
Welcome to the HP Forums!
I noticed that you are unable to access certain features of your HP, with your HP Officejet pro L7780 printer solution Center. I'm happy to help with this problem!
Please, try the following steps:
- Uninstall the software. Uninstalling the printer software.
- Unplug the printer USB cable.
- Clean boot the computer. How to perform a boot in Windows.
- Disable all Antivirus programs. Disable Antivirus software.
- Disable all firewall programs. The WF of end-to-end.
- Create a new user account. Management of user accounts and connections (Windows 10).
- Reinstall using the printer HP install wizard for Windows. (Expect that the software will ask you to connect the printer USB cable.)
If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
Hope these steps help!
Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.
Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.
Installed everything, but when you run the solution center it says it can't open because incomplete installation.
The printer works from Windows 7.
I have an XP machine and Solution Center working on it.
Any suggestions anyone.
This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.
The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.
Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.
Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.
I don't know how the setup.exe uses solutioncenter.msi?
The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.
If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.
I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.
Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.
Add these entries (click new...) for the owner user variables and System variables:
In the name box: APPDATA
In the value box: %USERPROFILE%\AppData\Roaming
Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
Thanks for all help on this.
I have an OfficeJet Pro L7780 which displays offline in devices and printers constantly. I discovered if I queue print jobs to it and then restart the print spooler all jobs will come out perfectly, then the printer will instantly be in offline mode. Here's what I've already done for troubleshooting:
Upgrade to the new firmware (R2011NxNxeN0)
To factory reset # and 3-boo
Changed ink and Printhead
Most recent pilot 14.0 (tried Basic and IT Pro Driver)
Rebooted and restarted computer and printer
Tried this on a 2nd computer to Windows 7 with the same results
Someone at - it actually use this printer under Windows 7 32 bit on the wired network port! ? !
I was just checking if you guys have tried the update I've linked below.
Is there a restore utility for an update of the firmware? I have updated the firmware on my Officejet pro L7780 AIO hoping to solve a problem of scanning; However wireless capability has since stopped working. I tried a static ip address - disconnect the power supply, check that the SSID and password, etc..
The wireless network Test report page. RADIO ON IS PASS, RADIO WORK = FAIL, PASS = NOT CONNECTED ETHERNET CABLE.
The previous Firmware before I upgraded was: R0040xxNxeN0; The version of the installed software package now is: R2011NxNxeN0.
The printer works with a straight ethernet cable to my router Netgear Rangemax Wireless model WPN824v2. However, it seems that I can only access the printer from my laptop through my desktop computer (which is networked via ethernet to the router) wireless - and the desktop computer must be powered.
(PS; Update does not solve problem of scanning)
I increased my support to management and after having crossed some tests additional etc, it was determined that my problem is, indeed, a hardware failure. HP offered me a replacement refurb for $245 includes taxes & shipping in both directions, as I mentioned in my last thread, they don't sell parts for this model, that's why I decided the lesser of two evils... spend more money & buy new or take the offer... I take the offer.
Thanks for your help.
Hi all, I am running Win 7 (64-bit) on my server, ethernet to a router from linksys gateway 3000. Attached to the same router the Ethernet is a HP OfficeJet Pro L7780 printer. I have a printer HP Deskjet 6988 ethernet attached to a hub (with a link to my linksys gigabit). There are many other devices Wi-wired and connected to this network. The problem I see is the following: I use a client of Wireshark network sniffer on my server. When you run a trace on the ethernet on the Linksys router, I see a large number of SNMP get requests and get responses. These are still ongoing between my server and the HP Officejet 7780 (never in/from) the HP Deskjet 6988. This segment of my network is flooded with such things SNMP. You wish to know which packages are and how can I cut most of this. Surely, there must be something in the printer software HP on my server that can be tweaked to eliminate most (if not all) of this SNMP traffic... Everyone?
You may also lose the ability to check your computer ink levels and some other utilities. You may re-enable the services when you need to scan. Stops the service and see what happens! You can always enable it back.
HP Officejet Pro L7780 all-in-One
Windows 7 64 bit
Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->
I run the program "to add a series of all-in-one Officejet Pro unit
I chose the wireless connection
The program runs and find a printer 'Officejet Pro L7700' I select it and click Next
He runs the installation for 5-10 seconds, and then it says that the printer was not complete.
I ran the install several times (also after restart the printer and the computer) moved always
The connection of printers is configured properly, to the best of my knowledge.
It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.
I have no idea what to do...
You can scan from the HP software successfully?
1. open the Solution Center, and then select settings
2. select scan settings
3. delete the shortcuts on the right side
4. click on the device to update, and then close the scan window
5. open again the scan window
6. add shortcuts on the left side to the right side
7. click on the device to update
8. try scan from the front panel of the printer
Last week, Solution Center of my printer HP Officejet Pro L7780 stopped working, even though I can still print directly from applications. But I can't use the scan feature. I uninstalled and reinstalled the driver full several times (after uninstalling using uninstall_L4, cold restarted the printer, remove the DigitalImaging registry key and delete all the files in %Temp%). The re - install seems to be okay except that when I try to open the solution Center, it happens nothing except sound.
Any ideas how to solve this problem?
Thank you for using the forum.
You can find the solution here:
Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!
Windows 10 - How to uninstall & hide updates
Hope that helps.
Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement
I have an OfficeJet Pro L7780 HP sent me after giving up on a 7310xi of fixation. I installed the software a message received a 'fatal error' on the error code 2203. He went ahead and installed OK - I thought. I even went to www.hp.com/support and searched this error code. From what I gathered, it had something to do with registration it... so I do not download their fix. Once installation is complete, I went in the scanning settings, because I scan a little bit. I discovered that the PDF file option did not appear in document scanning settings. Only BMP, JPG, TIF, PNG, PCX and FPX are listed, which are, in effect, the types of files that do not exist in the image scanning settings. It's as if the software loaded the same types of files in the settings of the document scanning and photography.
I wonder now if the fatal error message actually related to this problem.
Any advice... below to uninstall the entire package and start over again?
Thanks for the reply. Yes, I have installed Adobe Acrobat.
I finally abandoned and went on the website to the address support HP Contact online us, and they have solved my problem. They put me installation disk, click the add additional software option and install the OCR software. Once I did that, the PDF option, along with others, appeared in the output file to scan a Document.
I set up my HP OfficeJet Pro L7780 with the power supply to a power strip. I used the power strip to turn off the printer ON / OFF. After several days I couldn't turn the printer ON / OFF using the power switch. I also lost all the functions of the printer. I found later that I had only used IT? SWITCH the printer only. Is there a remedy for this situation?
Welcome to the Forums of HP Support!
It is not suggested to use a power strip or the printer power surge protector OR turn the market with. When the printer is turned off with the key, it allows to do maintenance, cleaning, etc., the time of printer.
It is possible that the printer has been damaged by doing so. It would be better to connect the printer to a socket directly and see if it retrieves the printer.
When you try to print, scan or copy what happens?
I want to replace my old officejet pro L7780 with a new model, which is a comparable HP model today?
You can check the HP Officejet Pro 8620 as example, it is a product of the same level:
You can check the HP site for the HP Officejet Pro series printers, more as wel as some HP Officejet printers.
Everything that I try to print has lack of vertical lines, text or photos. Happens if I print from my computer or if I try to copy a page directly to the printer. I went through the troubleshooting page full... the ink is all well heads, all good impression. Whenever I try to run a printer align it does not end the page. Whenever I have nothing he's trying to align printer print when its done & still cannot print the entire page. Gives me an error and says to check my documataion. I checked the book with my printer & there is nothing in this whole problem.
Welcome to the Forums of HP Support!
I see that you are having problems with your HP Officejet Pro L7780 printer aligning and printing vertical lines. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I understand the frustration that this must be for you. Looks like there are two separate issues. When the printer clean print heads and not properly align itself, this indicates that there is a problem with the cartridge, the print head or the line break. For vertical lines, it is usually independent for cartridges and print heads (not being is not a print quality problem). The paper type and print settings might be the problem.
To help determine the cause have you used this document: troubleshoot print quality HP Officejet Pro L7500, L7600, and L7700 all-in-One Printer Series?
Use the document in the order will help you determine if the print heads need to be replaced. If so, please contact HP.
Please confirm that the vertical or horizontal lines?
NOTE: are not replace the cartridges and printheads for vertical streaks in a print. Instead, check the paper as directed earlier in this document, or search for a document that addresses this issue. Vertical streaks on copies can often be fixed by cleaning the scanner glass.
- L7300 of HP Officejet Pro L7500, L7600 and series L7700 each - vertical stripes, lines or streaks on Copies, faxes or scan
If you have completed all the above steps and your product still has a problem, service the product.
Contact HP for service in all countries except Asia-Pacific.
First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
Cost of repair out-of-warranty printers may apply.
What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on options contact HP - click Get phone number
File number and phone number are displayed.
Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
I downloaded and installed the complete software for the HP Officejet Pro L7780. When the software asks you to be registered and I put in the printer and the search comes back 0. I tried the name and number of the product and always keep the same result 0. When I hit enter, the recording goes, and I have this running on my computer. I can't do fill. Please tell me that there is a simple solution to this. Thank you
I solved the problem by putting an end to a process and all is good with the world.
Maybe you are looking for
Have been a user of Thunderbird for several years a new pc has seen the size of cover page, Inbox and the way a lot of kids to read the modified fonts but good for mail. Not very computer savvy, but frustrating as very difficult to read from my previ
Pop-up windows are small and cannot be resized in Firefox v31.0. V30.0 and earlier, does not have this problem. Example: Hostgator SmarterMail. XP, 7, 8.1.
My webmail interface is SmarterMail in Plesk, such as provided by Hostgator. When updated Firefox updated to v31.0, I lost the ability to send mail because the windows popup for 'New', 'Answer', 'Reply to all' and 'Forward' are too small to enter dat
Could you please tell me how to change the display of the date to display the day month year instead of month day year?
Hello After working OK for a few days since my H50 Lenovo now seems dead. When I turn it on: I see the word Lenovo on the monitor and a small spinning wheel. After 10 seconds, the screen turns white for a few seconds. The Lenovo Word then reappears o
In Add/Remove Programs, can the older windows updates from 2006 be deleted safetly? or is it better to let them show?