HP Officejet Pro L7780 print, copy, Scan, Fax

Similar Questions

• OfficeJet Pro L7780 can't scan to PDF

  I have an OfficeJet Pro L7780 HP sent me after giving up on a 7310xi of fixation. I installed the software a message received a 'fatal error' on the error code 2203. He went ahead and installed OK - I thought. I even went to www.hp.com/support and searched this error code. From what I gathered, it had something to do with registration it... so I do not download their fix. Once installation is complete, I went in the scanning settings, because I scan a little bit. I discovered that the PDF file option did not appear in document scanning settings. Only BMP, JPG, TIF, PNG, PCX and FPX are listed, which are, in effect, the types of files that do not exist in the image scanning settings. It's as if the software loaded the same types of files in the settings of the document scanning and photography.

  I wonder now if the fatal error message actually related to this problem.

  Any advice... below to uninstall the entire package and start over again?

  Thank you...

  Thanks for the reply. Yes, I have installed Adobe Acrobat.

  I finally abandoned and went on the website to the address support HP Contact online us, and they have solved my problem. They put me installation disk, click the add additional software option and install the OCR software. Once I did that, the PDF option, along with others, appeared in the output file to scan a Document.

  Go figure.

  Thanks again.

• Officejet Pro L7780 print head error

  I have a Officejet Pro L7780 all-in-one. Recently, it does not work due to a print head error (printhead missing or damaged M/C). Help, please.  Thank you very much.

  Hello

  Use the following link to complete the troubleshooting steps.

  http://support.HP.com/us-en/document/c01446637

  If you still receive the error message after you perform the steps in troubleshooting mentioned in the document, then try cleaning print head in the printer menu.

  Installation Menu - Tools - cleaning print head

  Configure the Menu - Tools - align printer.

  If none of these help then try this reset... This reset will restore the printer to its factory settings & will clear all the settings of the printer.

  Unplug the cord from the back of the printer while the printer is always enabled.

  Now hold "# & 9 ' buttons on the printer and connect the power chords while pressing the 2 keys. Wait 10 seconds, then release the keys.

  If the printer turns off automatically, then wait for 10secs. and then turn on the printer using the power button on the printer.

  I hope this helps.

• HP Officejet Pro 8600 n911g all-in-one print-copy-scan-fax

  Problem involves printing email received;  It will not print the body of an email, only the header and footer.

  It is also the way it appears on the preview before printing.

  Hello

  I suggest you install a different driver such as the deskjet driver. You can see this thread for instructions.

• HP Officejet Pro 8625: Printer - disable the Fax Log printing

  Hello world

  I am trying to turn off fax printing logfile. I have searched and tried the suggestions on other threads; However, they all say to click on Confirmation of Fax that does not appear as an option. Here's what I did-

  -> Configuration-> Configuration-> fax reports fax?

  The remaining options are:

  Last Transaction

  Journal of faxes

  Speed dial list

  Caller ID

  Junk fax

  Someone help me please it becomes very frustrating.

  Hello

  Tap of the printer installation icon, then select Fax Setup.

  Then select advanced fax setup and set the Fax of Confirmation as Off.

  Also ensure that the Fax error report is defined as disabled in the configuration menu of advanced fax even.

  Please let me know if any difficulties,

  Shlomi

• OfficeJet Pro 8625: printer shows as fax only

  The State of the printer indicates that it is configured.  I am able to print from my laptop (WiFi), but not from my office (WifI).

  Jobe feeling all enter fax, no printing.

  Hello

  Please try

  Click Start > devices and printers

  Right-click your printer, and then select set as default.

  In the opposite case

  Download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-4/HPPSdr.exe

  or

  re-install the software and driver.

  Kind regards.

• OFFICEJET PRO 8620: PRINT AND SCAN THE DOCTOR

  I GOT MY SCANNER WORKING, AFTER THAT UNINSTALL WINDOWS 10 (NO NOT THE BELOVED), REINSTALLING ALL SOFTWARE USING THE INSTALLATION WIZ LINE PRINTER. I DOWNLOADED DOCTOR P & S 4.7. IT RUN BUT STALLS ON (WIA) AND STARTS THIS SELECTION BUT BLUE ARROW FLASHES SIMPLY BUT NEVER PRODUCES MORE AWAY, I HAVE TO KILL IT APP USING THE TASK MANAGER. What's new?

  Hi RANYAR,

  I'm glad your problem is solved!

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

• OfficeJet Pro L7780: Printer lost wireless connectivity

  The printer (which worked before wireless) has lost the connection to the router (wi - fi) for wireless printing and can not find the router when you run "Wireless Wizard". Have restarted the printer several times, but no chance connection. Summary diagnosis said the network name 'failed '. (I have with other devices wireless connectivity). The Configuration Page shows wireless status is disconnected and shows all zeros for the IP address and the subnet mask.

  Need suggestions on what to try next. Thank you.

  Turn off the router and back on again was! Printer has now found the router and is wireless printing. Thank you very much!

• HP officejet pro L7780 printer keeps printing the letter D per page

  I erased the spooler, unplugged the USB, off two laptops (WiFi), and the printer still prints D on each page. Have been putting scrap paper through it to see if it will end, but more than 200 prints and he always does.

  There is a firmware update, but it will not install with a pending print job, or the message.

  Any advice pleeeeze!  Thank you

  OK, I should be more specific.

  Go to the Control Panel, select "Administrative Tools".

  Then select 'services '.

  Then select "print spooler".

  Then choose 'stop '.

  Restart, the spooler restarted upon reboot. I guess you can restart in this menu as well.

  Good luck

• OfficeJet Pro L7780: Officejet Pro L7780 missing of the vertical lines on text & photos

  Everything that I try to print has lack of vertical lines, text or photos. Happens if I print from my computer or if I try to copy a page directly to the printer. I went through the troubleshooting page full... the ink is all well heads, all good impression. Whenever I try to run a printer align it does not end the page. Whenever I have nothing he's trying to align printer print when its done & still cannot print the entire page. Gives me an error and says to check my documataion. I checked the book with my printer & there is nothing in this whole problem.

  Help, please!

  Hi @LockGal,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP Officejet Pro L7780 printer aligning and printing vertical lines. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration that this must be for you. Looks like there are two separate issues. When the printer clean print heads and not properly align itself, this indicates that there is a problem with the cartridge, the print head or the line break. For vertical lines, it is usually independent for cartridges and print heads (not being is not a print quality problem). The paper type and print settings might be the problem.

  To help determine the cause have you used this document: troubleshoot print quality HP Officejet Pro L7500, L7600, and L7700 all-in-One Printer Series?

  Use the document in the order will help you determine if the print heads need to be replaced. If so, please contact HP.

  Please confirm that the vertical or horizontal lines?

  NOTE: are not replace the cartridges and printheads for vertical streaks in a print. Instead, check the paper as directed earlier in this document, or search for a document that addresses this issue. Vertical streaks on copies can often be fixed by cleaning the scanner glass.

  • L7300 of HP Officejet Pro L7500, L7600 and series L7700 each - vertical stripes, lines or streaks on Copies, faxes or scan

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro L7780: HP Solution Center

  I see I'm not the only one having this problem since the day of security Windows on Janualy 4, 2016. I executed issued alerts here to support.
  Basically what happens is that I can open the Solution Center, but when I try to open either Photo or Document scan I get a gray pop saying "The HP Imaging Device was not Found" it tells you so what do I do, but all of these steps have failed.

  I noticed something is in the Device Manager, devices for imaging and printers, Officejet Pro L7700 under events, I also have this message.
  Devies Imaging ' device USB\VID_03F0 & PID_2312 & MI_00\6 & 36fd2d51 & one & 0000 also requires installation. »
  Printers 'device USBPRINT\HPOfficejet_Pro_L7700\7 & 30237294 & 1 & USB001 requires installation."

  I'm a complete novice, but for me the finger seems to be pointing to my USB drivers or control. Anyone have any ideas?

  Perhaps I should mention the printer works fine

  Thank you.

  Hi @Knocklong44,

  Welcome to the HP Forums!

  I noticed that you are unable to access certain features of your HP, with your HP Officejet pro L7780 printer solution Center. I'm happy to help with this problem!

  Please, try the following steps:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Expect that the software will ask you to connect the printer USB cable.)

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope these steps help!

• SNMP eat upward of bandwidth on my (HP officejet pro L7780) ethernet

  Hi all, I am running Win 7 (64-bit) on my server, ethernet to a router from linksys gateway 3000. Attached to the same router the Ethernet is a HP OfficeJet Pro L7780 printer. I have a printer HP Deskjet 6988 ethernet attached to a hub (with a link to my linksys gigabit). There are many other devices Wi-wired and connected to this network. The problem I see is the following: I use a client of Wireshark network sniffer on my server. When you run a trace on the ethernet on the Linksys router, I see a large number of SNMP get requests and get responses. These are still ongoing between my server and the HP Officejet 7780 (never in/from) the HP Deskjet 6988.  This segment of my network is flooded with such things SNMP. You wish to know which packages are and how can I cut most of this. Surely, there must be something in the printer software HP on my server that can be tweaked to eliminate most (if not all) of this SNMP traffic...   Everyone?

  You may also lose the ability to check your computer ink levels and some other utilities.  You may re-enable the services when you need to scan.  Stops the service and see what happens!  You can always enable it back.

• All-in-one printer, HP Officejet Pro L7780

  I set up my HP OfficeJet Pro L7780 with the power supply to a power strip. I used the power strip to turn off the printer ON / OFF.  After several days I couldn't turn the printer ON / OFF using the power switch. I also lost all the functions of the printer. I found later that I had only used IT? SWITCH the printer only. Is there a remedy for this situation?

  Hello BPLRET,

  Welcome to the Forums of HP Support!

  It is not suggested to use a power strip or the printer power surge protector OR turn the market with. When the printer is turned off with the key, it allows to do maintenance, cleaning, etc., the time of printer.

  It is possible that the printer has been damaged by doing so. It would be better to connect the printer to a socket directly and see if it retrieves the printer.

  Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.

  When you try to print, scan or copy what happens?

• HP Officejet Pro L7780: HP Officejet Pro L7780 Solution Center does not work even though I can print

  Last week, Solution Center of my printer HP Officejet Pro L7780 stopped working, even though I can still print directly from applications. But I can't use the scan feature. I uninstalled and reinstalled the driver full several times (after uninstalling using uninstall_L4, cold restarted the printer, remove the DigitalImaging registry key and delete all the files in %Temp%). The re - install seems to be okay except that when I try to open the solution Center, it happens nothing except sound.

  Any ideas how to solve this problem?

  Thank you.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

  The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.