HP Officejet Pro X567dw: Required PIN after wake up

Similar Questions

• OfficeJet Pro X 476: OfficeJet Pro X476dw - calibration 0% after an hour and a half

  Hi all

  today I bought new OfficeJet Pro X 476 DW and the calibration procedure is always 0% after an hour and a half...

  I have inserted all the white, connect to my network like he said it in the installation guide that I can't...

  any ideas? Can I reset procedure?

  NACE Hey!

  I just pulled the power of mine and plugged back in a page came out right away and now it's 15% and moving upward...

• HP Officejet Pro 8620: Cannot parse after upgrade to Windows 10

  After switching to Windows 10, I found that I could not scan to my computer using a USB connection.  I ran HP print and Scan doctor and he said that everything was OK and I could actually scan a document into my computer using the "scan test" function of the program.  However, the normal scan would not work with the error msg 'connection to computer is lost.  So I uninstalled the current HP printer driver software and downloaded the recommended replacement.  The scan does not always for the same reason.  Still printing HP and Scan doctor said that everything is perfect with the scanner but now when I try to do a 'test' scan I get the message "HP Officejet Pro 8620 is not found".

  This same package worked for many other clients, so I don't feel the driver/software it is, on the contrary, I suspect that the question has something to do with the computer.  I'm always happy to do everything that I can to help if you want.

  I suggest running the tool (SFC.exe) System File Checker. If you do not know how, you can use the following link for instructions: System File Checker: run sfc/scannow & analyze its logs in Windows 10 / 8 / 7.

  Another thing we can do to help isolate the problem is to perform a WebScan.

  I made some screenshots for you that might help, I know that sometimes it is easier when you have a Visual. You will need to get the printers IP address from the front panel of the printer. You can touch the wireless network icon and view in the menu wireless settings. Take the IP address and enter the address of a browser bar.

  In the embedded Web server, click settings

  

  On the left side, click the administrator settings

  

  You will see the following message will appear, click OK

  

  You can now select continue on this site

  

  It may take a few minutes for the next page load. You might even see get a message that says: "Internal system error", if this happens please just refresh the page. (you can tap F5 on the keyboard to refresh)

  

  Once the WebScan is enabled you can click the WebScan tab above and do a scan. Please let me know if it works or not.

• OfficeJet Pro 8610: Printer restarts after installing wireless through the control panel of

  I am the first time in this forum. Yesterday, I set up my new printer OfficeJet Pro 8610. With ethernet connection, it works fine. "When I set up the Wi - Fi connection, the printer in a few seconds said: printer eror, and on the printer" and restarts. Can you please help me solve this problem? I bought this printer for wireless operations during the first!

  On my wireless works several laptops, mobile phones,... etc.

  I have updated the printer with the new firmware, too.

  Thanks for quick help!

  Sveťo

  Hello

  Thank you for your response. As I talk with the support center to our country of Slovakia, the problem is on the router on the side of the internet provider. After the update of the firmware on the router, the problem of many was indicated by connections wirelessly with HP network printers. Provider is UPC Slovakia, UBEE router. I give the floor with their support, they will make the new version of the software. Thanks again for the good help from HP support!

  Sveto

• OfficeJet Pro 8000 Wireless does not wake

  New OfficeJet 8 k wireless bought about 3 weeks ago.  The installer went well, prints nicely when it prints. Problem is that he falls asleep and is not responding to print jobs, ping, http, HP net diagnosis... Essetntially, it "disappears" from the network.  However, if I reboot the router wireless, just the router, he wakes up, will launch the impression of the task that has been waiting in the queue.  When it is invisible network printer configuration page print correctly when the button is triggered.  Nothing I do on the printers of the controls (for example wake up wireless, shut down and restart,...) it reconnects to the network.  The only thing that works is to feed the router market.  Calendar does not appear to be related to the printers power saving mode directly (i.e. when the printer goes to economy that is still accessible for some time).  Seems to take from one day to the next, pretty much, for the "disappearance".  Disabling the firewall (Comodo) PC does not fix.

  The Setup is:

  • 2 computers (laptop w / XP pro and office w/XP home/Media Center)-both with the problem.
  • Laptop wireless
  • Office wired directly to a port on the router ethernet
  • DSL modem connects to the router

  Network configuration:

  • Router Edimax BR-6204WG (802. 11 g)
  • Computers use DHCP; term of the lease has changed to 'forever' - did not help
  • The printer IP static value. Static IP also configured in router (xxx.xxx.xxx.195)
  • Router IP address xxx.xxx.xxx.193; mask 255.255.255.192
  • DHCP range set to xxx.xxx.xxx.198 - xxx.xxx.xxx.220
  • WPA - PSK security
  • Channel 6 (neighbors using 1 & 11)
  • On the PC printer port is a port TCP/IP of STD.
  • Lates firmware & drivers installed everything autour

  Before this printer, I got a differrent print server (always connected, static IP xxx.194) who never had the problem.  It is a stable network that works intact for several years. I'm an it & network professional and at a loss.  Is ti software of the printer, the driver or the router?

  Any ideas?

  Sorry to take so long to recover.  I tried different solutions, no luck.

  So, I went with my gut and bought a new router (Buffalo WHR-HP-G300N).  My thought was that my 'old' router did not know how to wake up a sleepy printer.  New router has been working fine for a month.  Wakes printer very well.

  As another advantage, one of my kids will get to upgrade their 802. 11 b 802.11 G with my old router network.

  Thanks again.

• Officejet Pro L 7680 problems after update drivers from leopard to snow leopard

  Updated to Snow Leopard from Leopard on Mac Pro with 4 HD and 12 GB of RAM.

  Follow the instructions in the Web site for the upgrade to the new driver from HP.  When I click on the HP utility now I get the error message:

  "Incompatible components - some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device won't be available. Please click on HP assistance point in the toolbar to visit the online HP Support site and download the latest versions of the HP software. "Some features do not appear in the HP utility, including scan functions.

  Followed the instructions to the letter.  No mention of deleting the HP files in the library.  Would this sole the problem?  Receive information on how to get rid of the old version and install the new one driver version. Thanks, Araya

  Hi Araya,

  Please run a scrubber to remove any HP software installed on your Mac, it will remove most recent and any previous Mac software as well:

  * Please note that the following steps will delete all HP software installed.
  
  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  In order to avoid any possible problem, also to repair disk permissions before installing the software:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Then install the software for Snow Leopard. as you probably more download this file already, just check by comparing the name of the file:

  http://FTP.HP.com/pub/softlib/software11/COL30718/MP-76100-1/HP_Installer_Officejet_Full_Group08_10.3.dmg

  After completing the installation, restart the mac and install the latest driver by clicking the Apple icon, then software updated.

  Please let me know of any problems,

  Shlomi

• OfficeJet Pro 8500 a909g: lost after upgrade windows 10 Scan function

  I saw many older posts on this topic (device connected to another program or device) and have waited and waited to see if finally HP allocate updates to allow the HP Solution Center work again for analysis, rather than having to use the very limited windows scan app.   It seems that all the solutions proposed to uninstall and then reinstall all gave a lot of aggravation and never fixed the problems.  I still have the problem and all drivers are updated... was better resolution ever deployed by HP or should I just keep using the pathetic Windows App that does not offer half of the facilities we had using the solution center to analyze?

  Hello

  Thanks for the reply.  I already have the latest version of the complete software and drivers are completely up to date.

  Error Center solution that message continues to say impossible to analyze because another program or device uses the networked HP imaging device.

  Having said that I have download the analysis option you suggested and it is a job much better around the other Scan MS application I've had.  At least I can crop document and add pages to scan by the looks of things flat.

  Thanks for your help.  Although I still really wish that HP could just fix the solution Center works again for scanning.

  See you soon

• Officejet Pro 8500 required user intervention has Premium Windows 7 64 bit

  I changed the cartridge according to market and started getting this error message?

  Hello

  I don't think so. I saw spare pens work on HP printers. The only thing I could think off, is that the cartridges that you and the printer are not communicating properly. It could be the chip on the cartridges, so I was wondering if you could either get a new set of replacement cartridges or try the current to another compatible printer just to see if you get the same problem.

• OfficeJet Pro 8610: How can I keep my Officejet Pro 8610 fall offline?

  My Officejet Pro 8610 will soon after a print offline job and must be recycled to the wide and turn it back on before it will print again. (says not connected printer) Now, this happens after 16 months of operation. Mac computers and routers are Apple Time Capsule. Everything is wireless. A semi full reset on the 8610. Uninstalled and reinstalled HP software. Restarted routers.  Any suggestions?

  Hi @GLORIATAYLOR,

  Welcome to the HP Forums!

  I understand that your printer always disconnect your wireless network. I want to help.

  You might want to set a static IP address for the printer. This is therefore a document, you can review how to set an IP address: http://support.hp.com/gb-en/product/hp-officejet-pro-8610-e-all-in-one-printer-series/5367603/document/c04082680/

  Let me know if it helps.

  Please click on the thumbs up below to thank me for my efforts! If this post helps you solve the problem that you are experiencing, please click "accept as Solution" so that others who may have the same difficulty can find the answer more effectively. Thank you for participating in Forums of HP!

  Kind regards

• Hi... hp officejet pro 8600 white Panel

  Hi, I'm new to the forum.

  I'll get straight to the point

  I bought the officejet pro 8600 AiO

  After 3 weeks of use my Panel turned to white. I tried to reset the printer to advice provided by experts on the other post but nothing happened.
  Can you please tell me what can I do myself to put it back as it was. Or I have to send my product to the HP service center?

  Hello

  Please perform a factory reset by steps has sent a private message.

• Correct ink cartridge HP Officejet Pro L7555 - was 88XL; can I use 940XL?

  The HP Officejet Pro 7500 series seems to require the HP 88XL ink cartridges, but these are not well highlighted these days.  The 840XL works in the 8000 series and these machines seem almost identical to the 7555 I.  The 840XL works instead of the HP 88XL?  What is the difference between these anyway?

  Thanks for any light you can throw on this issue.

  HP Officejet Pro L7555 requires ink HP 88 is correct. These are not well highlighted these days; is not true. You can always shop online at http://shopping2.hp.com/en_US/home-office/-/search-SimpleOfferSearch?PageSize=15&search=&SearchTerm=HP+88 for the HP 88 ink.

  It's the HP 940 ink that works in HP Officejet Pro 8000/8500 series printers.

  The HP L7555 and Pro 8000 may seem identical in some aspects, but not all because many features are added in the new printers. Even ink the printer technology is updated.

  The two sweepers in discussion mechanism different ink and so HP 940 work nto on both.

  Inkology HP: http://www.youtube.com/watch?v=dIF_myynUlc

  I hope this helps.

  I work for HP but my messages and responses are mine.

  Have a great day!

  Michael. If you like this post, click on Bravo.

• OfficeJet Pro 8600 D949CA: Scan of Cant to PDF after upgrade Mac Sierra 10.12

  Just upgraded to mac Sierra 10.12 and now scan to PDF to the computer does not

  error: "a required software component is missing or damaged. Please reinstall the software for your device and/or check your hard drive for problems. »

  Then I downloaded the latest version of the driver, but when I click on HP Utility & Scan to computer it gives error

  "Software required for the scan of the computer could not be located on this computer.

  simple scan software can not find him as either

  but disk utility works insofar as I can print on printer

  Summary:

  I installed the latest driver after upgrade to Mac0s 10.12 Sierra

  I can not scan to PDF & send to the computer

  Feature product number: CM749A

  Name of device model: HP Officejet Pro 8600 N911a

  Device serial number: CN34SBXG0H05KC

  Mac OS version: 10.11

  Service ID: 23226

  Hi @orangecowboy,

  Thank you for reaching out to the forums! I understand that you have problems of digitalization in PDF format for the Mac since the upgrade to the Sierra. I'd love to help you.

  Try the following steps to see if they will solve this problem: Scan network connection is lost (Mac).

  You have the option to allow the scan to computer?

  I have provided a few steps to manually remove all the old software of the printer and reinstall the latest drivers again if you still have problems.

  Here are the steps: Uninstall HP Printer (Mac) software.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.

  Restart the Mac.

  Empty the trash.

  Once connected, repair disk permissions.

  1. On the Dock, click Applications, then utilities.
  2. Double-click disk utility.
  3. Highlight your hard drive / partition on the left (by default this is "Macintosh HD").
  4. Click repair disk permissions at the bottom of the window.
  5. Once the repairs completed, restart the computer.
  6. Restart the computer.

  Install the latest version of the software: HP Easy Start.

  If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!

• HP OfficeJet Pro 8610: HP settlement 8610 requires Attention, when you try to print 4 x 6 photos

  Good,

  After reading so many others and worth that they have with this issue, I submit to you that this could be a serious problem.

  I have an impression of this printer using any software problem, if I try to select the paper size of 4 x 6 or the "Photo paper" options in the printer settings.

  The best part is the error message I receive Windows 8.1. It is said that the printer "to monitor". There is no pop up n the printer as a mistake and nothing in the screen "Control Panel\All Control Panel Items\Devices and Printers\HP Officejet Pro 8610 (network)" on an error.

  Any help would be greatly appreciated. And do not pull the shit 'check the paper tray' here... I checked about 12 hours of your support help documents and I'm tired of seeing this document as the solution to the problem. This is not it.

  Also, I don't want to hear, which does not support the format of paper. The software driver has several options of stock of photo paper and several sizes...

  What's next? That's what I want to know... What's next?

  Alrighty then...

  I don't know what I did differently, but it seems to be the impression this morning. Totally weird, but happy that he woke up!

  Thanks to all who have offered solutions...

  Laughing out loud

• HP officejet Pro 8500 909: HP Officejet Pro 8500 909 has not scan after downloading Windows 10

  About 6 weeks ago, I downloaded Windows 10.  Today, I tried to analyze something and received the message "no Scan Options".  So I tried to go to the Hp Solution Center and who do not respond. When I was on Windows 7, I have had no problem scanning or with the HP Solution Center.

  Hello

  You will probably need to reinstall the HP software after an upgrade of the operating system.

  Please follow the steps for exactly the problem and check for the difference:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8500-all-in-one-printer-series---A9/3752454/model/3752455/document/c04714314/

  Section ' can not analyze after upgrade to Windows 10 "should apply, or the"HP solutions Center can not run"or 'Scan is busy or in use' error with a connected printer"if it's the exact specified error when you try to open the HP solution... Center.

  If you need to uninstall the HP software, uninstall it by running the following remove utility Uninstall_L4:

  http://ftp.HP.com/pub/softlib/software12/COL31044/MP-77037-4/OJP8500vA909_Scrubber_13.exe

  Kind regards

  Shlomi

• HP Officejet Pro 8600 more won't copy even after hard reset

  HP Officejet Pro 8600 Plus the Windows 8 operating system

  Will be printed computer; you scan documents & save on computer. will NOT be printed on the device.

  Stop printer; unplugged from the wall and the back of the unit. holding the power button for 60 seconds. reconnected; unit began.

  Document placed on the glass; Press copy; hit black; Unit pulls the sheet of paper; device scans the document (squeaks when scanning); After the period of time, it spits out paper & readings 'canceled copy', but do not erase or return to the home screen.

  Help!

  Hello

  Please check your Inbox for private message for the reset, I will send you.