HP Officejet Pro X576dw: Wireless Direct Printing using the Lan cable

Similar Questions

• OfficeJet Pro 8600: Wireless direct printing of Photos

  I was able to print documents from my Ipad using direct wireless but I'm not a great success in printing photos on paper photo 4 x 6.  I'd be able to do this?   If this is not any other paper in format 4 x 6?   Another device using this printer is Macbook Pro with a wi - fi connection.

  @Garjoy,

  You need to install the HP ePrint app.

  Getting started with HP ePrint Mobile Apps

  Once you are connected to the network printers, open the eprint application and select the photo or item that you want to print.

  You will then see a preview before printing with advanced options.

  This will allow you to change the paper type and size.

• OfficeJet Pro 8600 Wireless Configuration - print is in the queue, then disappears. Do not print

  I just got the Officejet Pro 8600 as a gift and burden of implementing software and it on my wireless network.  When I try to print an e-mail or a coupon, the command changes to the printer and indicates in the queue. Then after a few seconds, the print queue (work) disappears without printing the document.  This command goes to the HP ePrint feature or the Officejet Pro 8600 network?  It shows the HP ePrint as being on USB.

  I have run all the Diagnostics, downloaded all the new software, software packages and updates.  I spend several hours trying to get to the printer.

  Thanks for any help you can provide.

  Hi @bksechols

  Welcome to the Forums of HP's Support.  I understand that when you send a print job to your printer Officejet 8600 to printing to the queue, then disappears without the printing of the print job.

  To help you, you please provide additional information?

  • How is the printer connected (USB cable, ethernet or wireless)?
  • What operating system do you use?
  • All print jobs fail? If Yes and you are using a Windows operating system, please try printing HP and Scan Doctor for Windows.  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems.
  • When you send a print job are sending the address of electronic mail of the ePrint printer? If so please check The HP ePrint, print not print job if you send the print job using the print command, please see the document of your HP printer print jobs are stuck in the print queue .

  I look forward to hear from you.

• HP Officejet Pro 8610: Unclear Instructions online, using the phone fax configuration, how to print envelopes

  Terminology used in the instructions I'm not familiar with.

  Hi @chazz85,

  I'd be more than happy to help you with your configuration envelopes and printing of fax.

  Are there specific terminology that you want me to explain?

  Let's start with the implementation of the fax machine.

  The best market-well because it is in this document to set up a new Fax.

  For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.

  • Is he a dedicated phone line? Only used for faxing.
  • Or is it a shared phone line? Phone and Fax.
  • Is your analog phone provider (typical telephone lines) or digital? (Cable connection)

  If the row is shared;

  • You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
  • You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
  • You have voicemail? A subscription to voicemail service using the same phone number as the fax.

  The (Simplified) recommended configuration would be;

  1. Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer

     Then, if any;

  2. Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
  3. Your phone will then connect on the answering machine (once again using any phone cable)

  Once I have more information about your setup I can help you further.

  Now for printing the envelope.

  I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;

  NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.

  1. remove the main input tray. Remove all existing paper from the tray.

  

  2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.

  

  NOTE: Do not load envelopes while the printer prints.

  3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.

  

  4. remove the output tray extension until the planned paper size is reached.

  

  I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.

  If it's another program, you can try the manual suggests.

  1 load the envelopes face to print down in the status bar.

  2. in the menu file in your software, click print.

  3. make sure that your printer is selected.

  4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.

  5. Select the appropriate options.

  • Under the layout tab, select Portrait orientation or landscape .
  • On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
  • Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.

  6. click OKand then click print or OK in the print dialog box.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• OfficeJet Pro 8715: Wireless sporadic printing

  My 8715 Pro OfficeJet worked perfectly out of the box for months.  Now, it does print that sporadically - I can't find the rhyme or reason to when and why it will print.  Have tried to reinstall, update, reboot, restart my router by turning off my firewall, etc.  It will print from my phone (iphone 6s) or my laptop.  It will print a test page when not selected in the printer itself no problem.  Problem started 10/16/16, from what I can tell.

  I tried to choose another driver, according to the instructions on another thread, and this has solved the problem for my laptop, but not my phone.

  Any ideas?

  Thanks for letting me know that you can print from iPhone now, but still cannot print from the computer, @krcullen.

  Download and run Print and Scan doctor. It will diagnose the problem and could solve it automatically. Let me know the results.

  Cycle power to the router, computer and printer. Try and access the Web built-in to the printer server. Type the printer's IP in the browser to see if it loads the page from the printer. Let me know.

  Here are some more things to check if the problem persists.

  Check the address IPv4 of the computer to verify that it matches the IPv4 of the printer address.
  Printers and devices, right click on the printer, on the left, click printer properties, select the Ports tab, click on Configure Port.
  If they do not match and then close the window configure the Port and click on create a port and follow the instructions in the wizard.

  Type the IPv4 address.
  Make sure the printer is online.

  Test the printer.

  If you're still having problems, check the address of IPv4 network on the computer to see if the first 3 sets of numbers match.

  Press the Windows and R key at the same time, to show the command line run, type cmd, then type Ipconfig.
  Check the IPv4 address.
  Now, check the IPv4 address for the printer.
  Do the first 3 sets of numbers match?

  If this isn't the case, then the printer and the computer are not on the same network.

  Try and ping the printer.
  In the same window type ping IPv4 address of the printer. (space between ping and the IP)
  Return all the answers?

  Let me know the results. Thank you!

• OfficeJet Pro 8600 Plus N911G: Cannot use the Scan to PC, option on my printer

  I recently updated from Windows 8.1 for Windows 10 and had to reinstall my printer drivers and software.  Since doing so, the office of my printer scanning function did not work.

  When I use the option on the printer, I get the message that no computer I'm done to open the HP printing software, select the scanner actions and select manage the scan of the computer.  The only thing is that twhen, I go to the HP folder in my Start menu, there is no installed printer HP software.

  I went to the page support and download the complete software solution for my printer and ran the installation, but I still do not have anything that will allow me to select the actions of scanner, and then select manage the scan of the computer.

  I even tried to use HP Print and scan v4.7 doctor.  He said full software solution is not installed on my computer and it gives me a button to click to download the software, and it is said that it downloads all the 123 file meg, then it gives me an error download failed message and offers try again immediately, but it fails every time.

  My printer is connected to my PC via my WIFI router.

  Hey there,
  Try the next step, I believe that this will help you overcome the problem.
  1. remove the printer driver of "devices and printer" which is located in Control Panel.
  2 Download this file (http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe), which is the solution full HP JO 8600 series.
  3. extract the contents of the file.
  4. open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called "RemovePreInstalledDrivers" > once you open this file black screen opens, wait for it to close, then move to the next step.
  5. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  6. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
  7 start the installation, choose the wireless option.

  Who should add the scanner to your imaging devices.
  Best Of luck ~

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• HP Officejet Pro L7590 all-in -: print to the location of the file

  I have a HP Officejet Pro L7590 all-in-one printer.  It has recently been make me save a Web document somewhere (like my office).  Only then can I print a document from there.  Recently I was talking to someone about this and they said to try and find the option "Print to file" because it could be activated, so maybe that's my problem.  Does anyone know where this option "Print to file" is so I can try and get it printed as before?  If I go to a regular Word document, it prints very well.  Help!

  Once clicking on edit you should simply select the listed HP Officejet Pro L7500 series icon in the list, then you should be able to print.

• Printing error HP OfficeJet Pro 8500 Wireless - said to replace the 940 black cartridge but I.

  I can't print my screen says replace 940 black basket.   I replaced it and the error will not go away.  I tried the power switch off and clean the print heads, but I get the same message and could not print or clean the heads.   Any suggestions before I have another new try/waste carriage?   Thank you.

  Please do not take into account.  In fact, I misunderstood the message of the screen that would replace the yellow cart.

• OfficeJet pro 8500 wireless problems

  Hello

  I have a HP Officejet Pro 8500 has more printer, set up my wireless network. It is connected to my Linksys E2000 wireless router (wireless, do not use the LAN cable). I print from my Win7 64 bit laptop, my iPhone / iPad (via airprint).

  This configuration is used to work perfectly, and 1 day to the other, I can not connect to the printer. I think that this happened after the printer has proposed an update of the firmware. No changes have been made to firmware on my laptop or a router, without the router settings have been changed.

  If I use my i-devices, no airprint printer is detected. From my laptop, I get an error indicating that a connection to the printer cannot be established.

  I tried selecting the IP manually (192.168.1.120), I did a factory reset the printer and run the wizzard wireless again and finally I connected a router LAN cable direct to the printer. I managed to connect the printer to the network, the network printer diagnostics detects any flaws, but the machine is still invisible to other devices...

  Now, I'm quite stuck...

  wingwalker1, is the light on the printer and a solid blue wireless? She has the same IP as before (which is the IP address if it has changed)?

  When you say thayt it has not completed the wireless configuration wizard, at - he gave a specific failure message?

  I want you to do a reset of network. First turn off the printer and the computer, and then unplug the power to the router for 10 seconds and plug it back. Wait for all lights to come back on the router and turn on the printer and the computer.

  Go to wireless menu, reset the network defaults and restart the wireless configuration wizard.

  I would like to know how it goes!

• HP officejet Pro 8500 wireless device

  Print, and dsplay collapsed printer says to remove paper jam.  Impossible to find the jamed paper after opening any reversal printer, remove the document feeder, removing duplex 2 siding on the back track.  I just don't see or find any paper.

  Following support HP Officejet Pro 8500 wireless treat that treat the paper jam error message.  Note that it says 'paper jams can be true or false. The product can report a paper jam, even when there is no paper jam. The following steps apply to both true and false paper jam. »

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01617494&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752459

• Officejet pro 8500 wireless print envelope

  2750 old boy had a slot "envelope" in the output tray to make unique envelopes.  Which was very convenient.  My brand new 8500 had no such "slot" and it seems that I have to remove all of the paper in the tray to put one envelope in!  That makes sense to me, but I'm not just any housing "simple envelope" anywhere!  Is it possible to print one envelope with the officejet pro 8500 wireless without having to use the tray itself?

  Thank you

  DrBillS

  I HAVE THE ANSWER THAT WE ALL NOW!

  If you're like me: I am running Windows 7, using Microsoft Word 2007, and you have the Officejet Pro 8500.

  I just spent the last hour on the phone with a customer service very friendly Rep who tried to help me to print without margins on an envelope. I have try on mail merge and include a return address printed in the upper left corner and a printed stamp sorted in the right corner. Whenever I want to print it would create a margin on the left and right side.

  She thought at first it was a software problem with Microsoft Word 2007, because in his version of Word 2003, she could print borderlessly. But I then created an envelope in Photoshop and tried printing without margins. Once more, it would create a margin on the left and the right that was a little more "5/8 of an inch. In fact, the exact margin size is 0,6875 ".

  Anyone else having the same problem? I'm sure you are.

  HERE'S WHAT YOU SHOULD DO IF YOU WANT TO PRINT WITHOUT MARGINS ON AN ENVELOPE:

  (1) choose a new document in Word 2007, then choose Virgin doc 'LETTER' (no envelope)

  (2) a set of left margin: 0,1875 (Yes it's small!)

  (3) a set of right margin: 1.5

  (4) set the top margin: 2.1875

  (5) also set the bottom margin: 2.1875

  (6) turn the grid if you see your work area.

  The grid can be enabled in the 'View' menu and then select the gridlines check box. If you hold down the 'alt' key, you can move objects (such as text boxes) without having to align them on the grid.

  Create your envelope, then print. Essentially what you are fooling your printer to think you are printing on a letter for an envelope printing in reality. I need to print 1000 at a time, so it was do-or-die because I just bought this printer and love the speed at which it prints in color. especially on the functionality of the project.

  Good luck!

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• HP Officejet Pro 8610: IMPOSSIBLE to PRINT GMAIL WITH NEWLY INSTALLED HP OFFICEJET PRO 8610 wireless

  All documents from my computer of fine print using the 8610 wireless.

  However, if I try to print any GMAILs, nothing happens.  I checked I have the selected 8610 as default printer and the printer has the correct documents ready, but nothing happens.

  OK, let's check how Chrome is set up to print.  (I also have a 8610 and easily print chrome!)

  Open any page.  Either type CTRL-P or open the Menu and select 'print '.  Another page should open with the printing options.  What do you see?  Your printer to display by default, or "Save as PDF" by default?

  Look at the field "Destination".  Just to make sure that you have selected the right printer, click on the "Edit" button, then see "Local Destinations".  Click on the "Manage" link to see all available printers.

  Remember that the right pair has been selected.  Mine shows that "HP Officejet Pro 8610 (network)" and has the green check by default.

  Something is not right to install in Chrome.  Worst case, we can uninstall/reinstall Chrome it!

  WyreNut

• HP PRO 200 MFP 276NW WIRELESS DIRECT PRINTING PROBLEM

  I JUST BOUGHT AN HP LASERJET PRO 200 276NW COLOR MFP PRINTER AND I DISCOVERED THAT I CAN'T PRINT DIRECTLY FROM MY LAPTOP. MY LAPTOP HAS A WIRELESS FUNCTION. HOWEVER I WAS ABLE TO PRINT FROM MY PHONE OF ZR SONY XPERIA. I TRIED TO REINSTALL ON MY LAPTOP SEVERAL TIMES BUT WITHOUT SUCCESS. HE ALWAYS SHOWS QUESTION SYMBOL ON PART OF TNE COMPUTER WI - FI.

  SECOND, THE PRINTER USUALLY MAKE NOISE WHEN PRINTING. IS THIS NORMAL?

  FINALLY. IS THERE ANY HP DESIGNATED SOFTWARE FOR PHONES TO WIRELESS CONNECTION WITH HP RINTERS TO RUN NORMAL PRINT JOBS?

  ACTUALLY, I BOUGHT THIS PRINTER DUE TO THE WIRELESS FUNCTION. USE THE WINDOWS OPERATING SYSTEM 7.

  I NEED HELP URGENT

  Thank you

  Thank you very much. I got on the question and my printer works perfectly. Your comment encouraged me to go further by performing for the solution sites from the center of the HP wireless printer and finally I found the solution. For the benefit of third parties. I uninstalled the software from my computer and started again.  I then followed the procedure listed in the HP Center /HP wireless wireless direct print page.

  Thank you

  OLAAT