HP Officejet6500A more

Similar Questions

• Printer HP Officejet6500A more

  How should I enter letters in the window of the printer to enter the IP address & password?

  Rich

  Hi tricky50,

  I see by your post that you want to know how put IP address, and the password to uppercase.
  I'll be happy to help you.

  When you get to the screen with the numbers on the screen of the printer by running the wireless Assistant, press abc, then above him press the arrow pointing upwards and she she will change in capital letters.

  Here is a document to set up the wireless network.

  Installation of the software of the printer on a wired (Ethernet) or wireless (with an Access Point).

  Please let me know if you need more assistance.

  Thanks for posting on the HP Forums.
  Good day!

• OfficeJet6500A more - ePrint Setup error - this printer could not connect to the server

  My 6500 a is connected to the internet and I am able to print wireless.

  When you try to set up ePrint, I go through the following menu path: installing, configuring Web services, the printer email address.

  I get the message error "this printer could not connect to the server.

  I have read and tried the others 'solutions' on the plate that involved turning market eprint, crossing out-lit power cycles, turning wireless on and outside, turning on the printer and wait 5 minutes, restoration of factory settings...   Nothing works.

  Any ideas?

  From one day to the next it printed the ePrint address, so I guess that the problem was with the HP sever.

• Re: Officejet 6500 has more - printer goes to sleep, wakes.

  Hello

  Location: HP Officejet6500A more - new iMac 27 "with Mac OS X 10.7 (Lion) - new driver installed OK HP - printer is connected via USB and I turned off the power on the printer wireless.

  After that full power on the work of the printer scans well, work, fax work - but what printer goes to sleep "indicated by the power LED flashes slow" I can't wake him again when sending a new print job - I need to do a full power off/on power by removing the power cable.

  When the printer is "asleep" utility printer HP cannot connect until I do a power full printer deactivation / activation.

  While the printer is in standby, pressing the flashing slow power switch / light has no effect to wake up the printer, only a full power/turn off works.

  I could not find info on the led slow blinking power manual?

  Any thoughts?

  Thank you

  Tony

  Hello

  Thanks for the post.  With this one, I recommend following the steps listed in the link below.  Make sure you are plugged directly into a wall outlet, not a power strip or conditioner.  Good luck!

  http://support.HP.com/us-en/document/c01321436

• AWOL Assistant printer!

  After a recent update of my Officejet6500A more... using my WiFi, when I go to the desktop icon it is no more gives me the ink levels control line and when I go to the Printefr Wizard it does NOTHING? I can get inklevels going toward the front of the printer, but it means that I have to go! Difficulty how or what I need to reinstall?

  peldering, I recommend actually reinstall the software for this printer and make sure that the version is the most up-to-date. Here is a link to this software:

  http://goo.GL/22oCS

  Be sure to check your operating system and if your computer is running 64-bit or 32-bit software before continuing.

  Before running the installation of this driver, I want you completely remove the software from the computer (programs and features, devices and printers and Device Manager). Also, click on the menu START and select RUN. Type "%temp%" and press ENTER. Remove all temporary files in this folder will not be permitted allows you to remove them.

  I would like to know how it goes!

• iPhone 7 more - IOS 10.2

  Recently, I just got my iPhone more than 7. Once I opened it started the update to iOS 10.0.2

  If after that it worked I checked the camera looking for the portrait fearure but he isn't here! How can I have?

  In addition, the device is slow and hanging out!

  Thank you

  Any comment yet!

• Appeal iPhone issues 7 more

  I recently bought the new iPhone 7 more.  Not only am I having problems with the LTE service, bounce back between 3 G and no service I am now having problems with call connectivity.  When you try to make an outgoing call, I get an automatic response from my carrier (Verizon) "it's Verizon, we are unable to complete your call at this time, please turn off your phone and back and try again."

  It is a known issue with the iPhone 7 and Verizon. Supposed to be Apple and Verizon are seeking him. It has been a problem since the phone was released. Do a Google search or search here on the forums for a temporary solution but not a cure.  But basically to stop the LTE oice and data into data only in the settings.

• Background app colors are more uniform

  Since the upgrade of the Sierra, web pages Chrome and the code editor backgrounds Atom are messy. For example, in the atom, it seems that I've highlighted throughout the text, part of the background is dark and some of it is lighter. In Chrome, bluish grey background of Facebook will be uniform and then become clearer on the sides abruptly. This sudden change happens on other colors, which actually look as if I chose the parts of the page with my cursor. Basically the uniform color of the origins on some Web pages or applications (Atom and Chrome) are more uniform.

  This substantive change only happens when I plug my HDMI cable on an external monitor. If I'm working on all of my macbook pro retina screen, everything seems fine. If I plug in my HDMI cable to an external monitor, the sets become non-uniform, even on the macbook pro (when mirroring) of the screen. I used the HDMI cable and the monitor with another computer and the problem does not exist, so I think it has something to do with macOS Sierra. Strangely enough, this problem only occurs with Atom and Chrome. Safari, for example, is absolutely perfect.

  I've included screenshots to show what I mean.

  Hi tedmcdo,

  Thanks for the upgrade to Mac OS Sierra! It seems like when you connect your external monitor to your Mac via HDMI, the Mac knows uniform color schemes. If this only happens when the external monitor is connected, you can try the reset NVRAM while it is disconnected from your Mac.
  
  

  What is NVRAM?

  A small amount of memory on your computer called "non-volatile random - access memory" or NVRAM, stores certain settings in a location that OS X can access quickly. Settings that are stored in NVRAM are dependent on the type of Mac you use and the types of devices on it.

  Information stored in the NVRAM may include:

  • The speaker volume
  • Screen resolution
  • Selection of boot drive
  • These latest panic the kernel, if applicable

  If you encounter problems with these features, you may need to reset the NVRAM on your computer. For example, if your Mac starts up from a bootdisk other than that specified in startup disk preferences, or a question mark icon appears briefly at the start of your Mac.

  How to reset the NVRAM on your Mac.

  After resetting the NVRAM, please connect the screen and check if the problem is resolved. Alternatively, you can try to boot your Mac in safe mode.
  

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:

  • Check your startup disk and attempts to fix problems if necessary directory
  • Loads needed kernel extensions only
  • Prevents elements start and the login items open automatically
  • Disables the user installed fonts
  • Delete font caches, hiding the kernel and other files of the system cache

  Together, these changes can help resolve or isolate issues related to your startup disk.

  Try safe mode if your Mac does not end commissioning

  Please use the Apple Support communities to post your question. These procedures should have your Mac showing its vibrant colors on the Retina display as expected. Good day.

• iPhone 6s more 'Phone noise cancelling' setting Grayed Out

  I have a 6 more than 128 GB iPhone running iOS 10.0.2. I can't activate the 'Phone noise cancelling' setting in settings > general > accessibility > telephone noise cancelling because it is grayed out. I have attached a screenshot for reference.

  I've tried hard restart my iPhone (Home + Power button) without success. Any help is very appreciated! Thank you.

  

  Hey there, Stephen Bond,.

  Thank you for using communities of support from Apple! I see from your post that your iPhone more 6s on iOS 10.0.2 does not work as expected because the cancellation of noise from phone toggle is grayed out. I'll be happy to help you.

  First check to see if the hearing aid Mode is enabled in settings > general > accessibility > hearing aids. If this option is enabled, then telephone noise cancelling will be grayed out as you describe. If this isn't the case and that the option is grayed out, please continue.

  How to back up your iPhone, iPad and iPod touch - please backup your iPhone to ensure that your personal information is safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - this process will completely erase the iPhone to allow a new copy of the iOS to install. The first time, select "set up as a new iPhone. Once your iPhone is back to the home screen, check the setting of the new. If everything works as it should, use the "restore from backup" link in the section «Get help» If it is not, under the same article, "Contact Apple Support".

  Take care and have a great day!

• iPhone 7 more telephoto camera does not

  Is anyone having problems with iPhone 7 more telephoto does not activate. I'll go to the camera application and press the 2 x zoom feature, but it appears to be not to activate the camera of 56mm at the front. I cover the lens with my finger, the camera on the right side and the iPhone always displays an image despite me concealing one of the cameras teo. I can't activate the second camera. It seems to only be zooming digitally. I'll do this outside and he'll only digitally zoom when I hide the second lens.

  Im having this same problem. I heard from someone that he could not work until the next software update... but I have no idea and have not found anything in the online help. If someone else gets to know how.

• "Sit less, move more.

  The new IOS 10.0.2 has modified the application of health by adding a video called "sit less, move more" section of health data. Although I agree with the feeling and I'm even happy to be preached about this TIME, he began to grate. Can I remove or ignore?

  Do not watch the video.  Scroll the screen to see your activity data.

• is it possible to buy the iPhone 7 more unlocked and without a subscription which will work in Russia

  My friend is going to go to New York for the holidays of the maintains 21 October to 31 October. And I really want to buy the iPhone 7 more 128Gb it. I know that I need a free sim card or without a contract. I asked best buy about this and they said they don't sell iPhones with contracrs. Is this possible?

  Thank you.

  Apple has not announced when they will start to sell the iPhone Unlocked 7.

• IPhone 6 more flashing screen

  After updating my iphone 6 more with ios10, the start flickering from the top screen and the buttons does not. stil phonse looking again, does not fall and there is not a single crash. It has already expired the warrently, I understand that there are a lot of people the same proplem faceing. We can hangout or Exchange the phone to Apple.

  Hello

  First consider trying the following steps:

  • Back up your iPhone (you can encrypt the backup if you use iTunes):
    • The backup of your iPhone, iPad and iPod touch - Apple Support
  • Restore it to the factory settings, with a new copy of iOS:
    • Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
  • Check if the glitch / question reappears before or after restoring the backup:
    • Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  If the problem persists (or if you prefer to skip this step), contact Apple support (mail service may be available) or make a Genius Bar reservation in order to have your iPhone verified and, if recommended by Apple, served:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• more secure e-mail provider

  Who offers the safer more secure messaging service on the internet?

  I would definitely say iCloud email provider is the most sure/more secure.

• iPhone 6s more does not accept the password for the first time

  All of a sudden my iphone 6 s more, will not recognize and accept my password.

  First screen says: "enter code". "Touch ID requires your access code when you restart the Iphone."

  Question... is equivalent to a 'code' a 'password'?

  Why she would accept my password and then 30 minutes later he rejects?

  Any ideas would be very appreciated.

  Ray

  Maybe nobody over there wants to take this question!