HP Omni 10, it starts, but not able to drag the screen initial screen is locked

With the power button, it starts after the screen sleep don't lock couldn't slide to get the password screen.

Don't know if the touchscreen went.

No keyboard... so not couldn't find another way to try.

Advertisement

Hey @pkp0512,

Welcome to the forums of HP.

You made recent changes to your Tablet? Have you tried to install Windows 10 or run and updates of Windows at the time it started?

You should be able to access the Recovery Manager by turning on the Tablet by pressing the Volume down and the Power button at the same time. If the touch screen does not work to select the Recovery Manager we can confirm it's a hardware problem. If he leaves you, then you are looking to a software problem in Windows that a restoration of the system (accessible in the Recovery Manager) should take you around when he was work and restoration.

Thank you.

Tags: HP Tablets

Similar Questions

  • LR has started but not able to load the fotos

    Hello

    LR is my standard program for raw/nef images.

    I m able to start the program by clicking on the icon on the desktop.

    When I click on import a window opens with the message «The work of LR doesn´t more»

    and the close program. When I click on a nave that it opens and messages also comes

    immediately. PS6 works correctly. I have LR 5 and windows 8.1

    Thanks Matty

    The only suggestion I have would be to reinstall you Lightroom 5.71.

  • FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

    Hi all

    We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

    In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

    Thank you

    Roshi

    Two things:

    -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

    2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

    2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

    2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

    2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

    2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

    2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

    -Then export again and review. DAT file in the Outbox folder. Is it empty?

    -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

    -Import, validate and export data

  • FDMEE of planning data loaded successfully but not able to see the data

    Hi all

    We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

    In import format, we have not mentioned hsp_rates, it's that whole issue?

    If we have different currencies, where we must define?

    Suppose we have INR, USD and GBP if I want to load the data of INR, where we define?

    Thank you

    Praveen

    Problem solved

    I've made changes in the import format now I am able to see the data in the Planning Application.

    Thank you

  • How to open GROSS of DSC_RX100M3 images?  I downloaded Adobe DNG converter 8.4, but not able to convert the images?

    How to open GROSS of DSC_RX100M3 images?  I downloaded Adobe DNG converter 8.4, but not able to convert the images?

    Minor correction to what SSprengel wrote...

    The RX100M3 is supported only by version 8.5.  Looks like you need a newer version.

    Using Photoshop | Digital Negative (DNG)

    -Christmas

  • Im not able to drag the color scheme of my master page library as is done in the tutorial.

    Hi I'm a newbie to Adobe Muse CC. IM watching her tutorial "how to create a Web site. im not able to drag the color scheme of my master page library as is done in the tutorial. can someone help me with this please?

    You are using an out-of-date very (!) version of Muse.

    Download the real version, please.

  • I'm not able to change the screen resolution it is stuck on 640 x 480

    I am not able to change the resolution of the screen that he is stuck on 640 x 480, that the slider will not slip and the color is stuck on 16-bit
    It's the 32 bit version of vista home premimum I have a 19 in monitor and resolution needs to be changed in order to display pages of the stuff are extremely too big

    Go to the website of your computer manufacturer > drivers and downloads Section > key in your model number > looking for graphics/video drivers Vista > download/install the.

    If this does not resolve the problem, you have a hardware problem with your integrated graphics, or your graphics card.

    At this point, contact the manufacturer of your computer.

    See you soon.

    Mick Murphy - Microsoft partner

  • Dreameaver CS3 running but not able to update the software.

    The updater is always answer "there is no update at this time." I think it's a thing of firewall with my pc windows 7 (that I can't change it). Dreamweaver is currently the 3481 version and I know that there are at least build 5861. Y at - it a link to download the latest version of adobe manually?

    Hi Ken,

    Please visit the link below and find the update for Dreamweaver.

    Updates

    Thank you

    Atul Saini

  • OfficeJet 6600. Works as a printer, but not able to start the scanner.

    OfficeJet 6600. Works as a printer, but not able to start the scanner.

    I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

    I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

    Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

    But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

    However, despite the property intellectual not recognized the device functioning as a "printer".

    But I need to use it as a scanner.

    Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

    Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

    Can someone, please?

    Thank you in advance.

    Hey,.

    Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

    Have a great day!

  • Wil Windows 7 does not start and is not able to solve the problem

    Hello

    I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

    When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

    I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
    At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

    Thank you

    > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

    This is a typical symptom for a faulty HARD drive.
    I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

    > At some point, the screen showed that there is a cable that is not connected or something.
    Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
    This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

    In my opinion, you need to change the HARD drive.
    I think this should solve the problem.

  • I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

    Internet, not able to browse computers on the network

    The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

    I'm puzzled.

    Hello

    I suggest you to send your request in the below link.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  • My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

    Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

     

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • I bought an iphone6.  I registered. On the apple's music. But I'm not able to get the free month trial subscription

    I bought an iphone6.  I registered. On the apple's music. But I'm not able to get the free month trial subscription

    What happens when you try?

  • Firefox starts on the computer, but will not be displayed on the screen

    Firefox is loaded on a dell Windows XP computer; It works fine one day. The next day I had cleaned up cookies and temporary files when I clicked on the icon, it acted like it was running, but would never appear on the screen. When I went to start it again it told me he was running, but I still don't see the program.
    I had to reboot the computer, but when I tried to start it again, it did exactly the same thing.
    I uninstalled and reinstalled but that has not solved the problem.

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
    3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

    IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

    After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

    • (Windows 32-bit) C:\Program Files\Mozilla Firefox
    • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
    1. Go to the Windows Start menu and click on 'computer '.
    2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
    3. Find the folder "Program Files (x 86)" or "Program Files".
      • On 32-bit Windows, double-click the Program Files folder to open it.
      • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
    4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

    Now, go ahead and reinstall Firefox:

    1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
    2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

  • With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

    With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

    bjmrao wrote:

    With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

    Please ask Whatapps since you use their app.

Maybe you are looking for


HashFlare