HP Omni 200-5316d all-in-one: memory upgrade PC 10600 1333 mhz for PC 10600 1600 mhz for hp omni 200
Recently I bought HP laptop, now time, I want to upgrade my all-in-one hp desktop omni 200-5316 d up to 8 GB of RAM.
Currently RAM pc3-10600 1333 mhz 4 gb (2 X 2 GB) outside the EEC.
Should I buy exactly the specification stated or can I switch to 1600 mhz pc3-10600 2 X 4 GB RAM not CEE.
Thank you
Hello:
Installation memory PC3-1600 does not accelerate memory, being the fastest, it can be run to 1066 MHz.
Even the 1333 MHz memory only runs at 1066 MHz, which is the highest speed of the processor.
I can tell you that memory installation in any PC HP that has a series 5 including your Intel chipset (and uses the memory of the laptop) is very difficult to upgrade.
I suggest that you read this post and one that I've referenced in this post to make sure that you get good memory or it won't work.
Tags: HP Desktops
Similar Questions
-
Can the HP MS-213. all in one memory Fund be upgraded to 8?
Can the HP MS-213. all in one memory Fund be improved from 4 to 8? I am running windows 7, 64 bit.
4 is the maximum:
http://support.HP.com/us-en/document/c01880718
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Icannot reinstall my officejet hp all-in-one, after upgraded to explore 8__
Icannot reinstall my officejet hp all-in-one, after upgraded to explorer 8
Hello Ratshell,
Thank you for your message. To clarify, when you say that you cannot install your printer, you are not able to download the driver, or you are not able to load the driver after download? If you try to install the driver from the CD supplied with your printer, try to download the driver from the HP site and installing once you have downloaded. Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
printer all-in-one memory card error Photosmart C6180
Photosmart C6180 all-in-one printer, xp computer
When I insert a 4 GB SDHC card in the SD slot + printer and
When I insert a SDHC 16 GB card in the SD slot +, two cases, the error "memory card error" appears on the printer screen.
The HP digital imaging monitor displays the error "no images on the card.
How can I correct the mistake of the printer software.
Hello
No, it isn't, when the device was built there were that many more 1 GB card and they were still quite expensive.
-
5740 HP e-all-in-one printer: how to change the destination for the scans folder
I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.
Two questions, both assuming I want to use the HP software to scan:
1. is there a way to set a default value of PC to the computer target for digital images?
2. How can I change the folder to which scaned images are sent?
What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?
Any help would be appreciated.
Roy
Hi Roy,
Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer. And Yes, you should be able to do much more PC software rather than on the front panel of the unit. And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan. Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.
I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended. Here is a link where you can get that below. I recommend you to install the latest web downloadable full version for your device first. Then install this
HP extended Scan
FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.
You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended. If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).
-
E-all-in-one printer want 5530: wireless set up for jealousy 5530
Our new HP Envy 5530 printer works very well connected via a USB cable, but cannot be found by trying to set up as a wireless option with either my Lenovo H5 PC (via a Netgear A6200) or a laptop Lenovo W540.
The printer connects to the same / correct SSID (BT Hub 3.0) and I tried to remove the firewall to see if it was what kept the whole upward.
Any help would be appreciated.
Welcome to the community @Matticus HP
I read your post on how your printer is not detected when you try to set up wireless. I want you to try the steps in the guide below you should get properly connected wireless.
You can also see another thread, that I posted and check your router settings if the guide above did the trick:
Re: HP 7520 loses connection wi - fi
Good luck!
-
I used Cartriege world genuing HP ink cartridges refills for the past 3 years. These cartridges are about 3 months charging sine and worked very well. I just print a page and then got the above message for the first time. Any help?
Thank you
lurcher1
Hello @lurcher1,
Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.
I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series
You will notice Solution: use genuine HP cartridges :
'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »
To get a better understanding to take a look at the documents below:
Can I recharge the ink in my HP ink cartridge?
&
HP vs reloaded cartridges inkjet print cartridges
I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!
-
HP Photosmart 3110 all-in-One Printer Scanner and install the HP for Windows 7 Solution Center
Hello
I have a printer HP Photosmart 3110 All in one with Windows XP. I bought a new computer with Windows 7. I plugged my printer HP to Win7 and now scan does not work. I need your help to install the HP Solution Center and make it work under Win7.
There is not a download for Windows 7 on this printer. It is the only way for you to scan through paint. You will also be able to get the center of solutions is due to any software.
THX
-
What ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?
61 HP cartridges are a pretty popular current model, I expect it would be stored in most places that carry the cartridges. I did a search at Walgreens, about 3/4 of them had 61 cartridges in stock at Houston.
-
HP5780 All in One: memory
How can I clear the mwmory in my unit, so I can dispose safely?
Hey @Huzie,
Welcome to the Forums of HP Support!
I see that you are looking to erase the memory of your Officejet J5780 printer. This printer, like most of the patterns of consumption, has no permanent internal memory and should not be able to store all the information outside the parameters of the printer. Accordingly, there is no way to erase the memory of the device.
Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
HP Officejet J3680 all-in-One: Officejet J3680 will install no software for Windows 10
The complete software for the J3680 will not install on my new Acer Windows 10 PC (6 months). I don't have the codes error, but when undo them the installation process continues from referring to Windows 8 and I made sure that the software that I chose was supposed to be for Windows 10. I went through the entire process, including all the trouble shooting process, and yet it will not be installed. 3 hours ago and I'm not impressed. This same machine and software worked fine on my Windows 7 PC.
Hi @rgslondon,
Thank you for joining the HP Forums!
I understand that your software HP Officejet J3680 will not install on Windows 10. And I'm happy to see it for you!
Please, try the steps in this guide, "device installation failed" or "unknown device" message during Installation USB (Windows).
If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.
I hope this helps!
-
I've recently upgraded to 8.1 Windows I don't have an installation disc for my (old faithful) 2610 Photosmart All In on 64-bit and I wonder if someone can tell me a way to 'get' my computer and printer to work together again.
Dear verve1,
Here you have the complete software you multifunction in point 8.1 of Windows Installer:
http://ftp.HP.com/pub/softlib/software12/COL30951/MP-110188-2/AIO_CDB_Net_Full_Win_WW_140_408-4.exe
I hope you find it useful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.
-
Fatal error when installing the Photosmart all-in-one software on Windows 7 x 64 for printer C4385
Hello
I had to reformat one of my laptops and as a result, reinstall the Photosmart software & drivers for my printer C4385. I downloaded the software from the HP website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76047-2&cc=us&dlc=en&lc=en&... =).
However, during the installation, I get on a fatal error in the last step, "product Configuration". I uninstalled and reinstalled several times with the same result. As you can imagine, I am really frustrated and seeks help from the community to solve this problem. Here is a screenshot of the error. Your help in solving this problem is greatly appreciated.
Hello
I see that you have a problem with the printer.
I suggest you to install the software one. Go ahead and uninstall the software first and then follow the instructions below.
You should get to a point in the facility, which looks something like this. Please click on the area where the yellow arrow.
Once you do, it will look like this. Please install each driver one by one, starting with the first options which is the printer driver. You have to disable each option, that some of these drivers will not let you uncheck which is very good.
Once its finish, you can go back and do the following installation.
Let me know the results.
-
DeskJet 1050 All in one J410: how to get the manual for Deskjet 1050 All in one series J410
How can I get the manual? Thanks for your help!
You got it out of the memory of your computer (C), but try to get out of the internet! In any case, thanks for your help.
-
Problems with the touch screen of HP all-in-One after upgrading Windows
I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1. After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove. The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button. There is no way to stop this. If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.
The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver. It stopped (system generated keys) flashes, but also disabled my touch screen input. So now the system is usable, but without the benefit of the touchscreen.
Here is the information on the driver:
HID-Compliant device
Date: 21/06/2006
Version: 6.2.9200.16851
(input.inf)
I tried updating the driver, but this seems to be the latest version available. Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.
Any suggestions on how to solve this problem and re-enable the ability of my touch screen?
Hello
Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.
So I suggest you to install the driver that is available on the HP website for your model.
Troubleshooting of touch screen in Windows 8
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148
Just reply with the results.
Maybe you are looking for
-
Hello My laptop HP Envy 15t broken left hinge and the left corner is cracked and bulging. The laptop has not declined or fell. When I open and close the laptop the hinge moves and then separate tiny capitalization. The tiny screw are falling and I'm
-
During the original installation of this product I did not choose the Fax function. Now, I would use it but whenever I chose the Fax I get the message "the fax feature has been disabled contact the person who set up the printer." I can't find any way
-
Problem of brightness on the battery in the computer Windows XP.
Original title: took off Windows 7 installed XP pro, problems with brightness on battery only, perfect on the main power supply, drives me crazy Reminder on '"power" "my laptop computer Samsung RV510 brightness is"perfect ". The problem is when runni
-
why I get this error Rundell C:\WINDOWS\ivoqadir.dll
My friend has a Rundell C:\WINDOWS\ivoqadir.dll windows error cannot find C:\WINDOWS\ivoqadir.dll or similar, whenever he starts his pc (Windows XP 32-bit) Any suggestions how to fix this? Although everything seems to work fine!
-
Failure of Windows 7 Service Pack - keyboard missing filter driver - nothing this fixes
I have a Pavilion dv6, running Windows 7 (x 64) - the software that came with the PC. Windows Update tried to install Service Pack 1 (KB976932) - for what seems to be a year now - and each time it fails during Setup and then "lies changes." When trou