HP Operating System CD sold and used with the computer of the other company.

I bought this CD from:

AClass products

32 c Westfield, Trading Estate

Westfield Trading Estate

Midsomer Norton, Somerset

BA3 - 4BH

United Kingdom

I found on this CD - he wrote "For Distribution only with new" or HP Compaq PC

Commercial sale claim, is that you can use it on any Acer, Dell, Fujitsu, Toshiba and other computer laptop or desktop - if they are, things can go wrong.

Its great to buy a HP CD to go with the HP for laptop or desktop, even if they think that using it on other computer companies may not cause problems. If I used it on a Dell, Toshiba or another computer, I know he can or can not install, but if this is the case, it may hang after that I have try or warn just not. That is why, I know things happen. For example you get HP Logo to appear in a Dell computer, or the Dell Logo appears in an HP computer - if the computer can still run the software, the software of the BIOS has instructions Stop and Go, just like WIFI and brand cards labeled software.

My problem or the question is, if someone claims its possible to use the CD of the HP operating system on other computers from computer companies, as if the problems never happen, its apples mixture similar to oranges unless you like a fruit salad, its best to put things in their place. I would like to know the truth of HP or an expert, some people say its strange I would have problems, they think it's harmless - there must be a reason for the problem when it is used on different computers. It would be good to know that I'm not the only one who knows how this happened, to confirm what I discovered and read, or if asked that its harmless to use with other computers, or simply absurd, and why.

Hi Kabigan

I even asked Microsoft and the answer they gave me, it's illegal. Society, I bought an OEM CD (Got back CD instead) and license, even to send the label with the serial number where his tell clear the Furijitsu, my old laptop computer is Hp. normally in my area where I worked as HE consultantant license belong to the preinstalled computer, it was purchased with.

My experience it won't work, because a recovery cd is check the bios and see that this isn't the computer that made the recovery cd. I have not yet opened the package, because I consider return the cd and the company label.

I may be wrong because I don't know the law, but normally software license is the same for the EMEA region for the whole country. It could be if she sold the Germany law differs "German Federal Court of Justice 06/07/2000 (find ZR 244/97) distribution of OEM and DSP licensing."

Tags: Notebooks

Similar Questions

  • First time that I Boot XP I'm missing operating system, it starts and then fine the next test. MBR problem?

    Just installed a new HD, with a fresh install of XP Pro.
    Now when I start the machine says missing operating system BUT it boots OK on the retry!
    Any thoughts on how to solve this problem?

    Looks like you have a marginal place on your hard drive.

    See the following Microsoft KB article:

    ""Operating system not found"or"Missing operating system"error message when you start your Windows XP-based computer.
      <>http://support.Microsoft.com/kb/321626 >

    HTH,
    JW

  • I'll be able to use the Windows 7 operating system on my new motherboard with the same hard drive?

    I have a card mother broken dell and I wonder if I change for a card mother Msi or Asus, but I always use the same hard drive that have my bones inside. I'll be able to use the operating system on my new motherboard?

    Original title: Windows 7

    No, you will not be able to.

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    What is OEM software? :
    http://support.Microsoft.com/GP/oemsupport_1/en-GB

    Licensing FAQ:
    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  • Windows XP Home edition has crashed - how to return WXP and use with the product key?

    Hello. I bought an Equium L20 last year and after 1 year my windows crashed due to a virus. I want to know how to get a real windows xp OS because the product under my laptop key is always saved for me and is a legitimate product but I can't get windows because it was obviously preinstalled and no CD was given to me with the package.

    How can I get back Windows to use with my product key on my WIN sticker below my laptop.

    Hello

    First of all, it is very strange that recovery CD is not delivered with your laptop. It's hard to believe, but anything is possible. As you know after buying a new product, it is very important to check all orders sent with it and if something is missing, you must call the local as soon as possible and not to wait a year.

    Sorry but this key code belongs to original recovery image and you can't use it with every installation of Windows XP Home edition CD. In your case, there are two options:
    -You can buy the CD of facilities Microsoft original WXP (with the key correctly code) or
    -Contact the partner of service allowed in your country and order the new CD from recovery for your laptop model.

    All that s!

    Bye and good luck!

  • Re-installation of operating system could not and cannot start the current operating system?

    OK to start, im using xp, I wanted to reinstall xp using the dvd I got with it. then I ran xp and has not clicked upgrade, instead I clicked on new installation. after it is finished, restart the pc and I went to the configuration screen. I went straight through and as soon as the transfer of file thingy started, he started saying missing files. Now I can't load up to new os or go on current...

    UPDATE: I don't know how to use R, the recovery thing console but I really want to format and make new ones

    UPDATE: after you press ENTER, im jumping directly to "ATTENTION: a/windows folder already exists that may contain an installation of windows." once I have press l to use the folder and delete existing, everything breaks down...

    Boot from cd of Windows XP, and then delete all partitions and then begin the installation

  • Re: Reinstalling operating system on Satellite A100 without deleting the other existing partition

    Hi all

    I have a Satellite A100-912 and have not reinstalled the operating system (Windows XP) for several years, but now I think that my laptop works well below par. I have my product recovery CD (disk recovery) and it will use for the re-installation.

    I have three partitions on the HARD disk (c, d and e, respectively).

    I was wandering if it would be possible to reinstall (get as long as the factory) my operating system on the c partition without erasing the data (for example my files) on partitions d and e.

    I did this on a Toshiba Satellite L10 using suggestions in this forum, but I don't know how to do it on my own. Is the user interface for the recovery/re-resettlement is not the same thing, so I'm afraid to lose my data if I proceed with the re-install without knowing what to do.

    Could you please say on how to make the re-installation of operating system only on the c partition without deleting (data on) other existing partitions.

    Thank you!

    > I was wandering if it would be possible to reinstall (get as long as the factory) my operating system on the c partition without erasing the data (for example my files) on partitions d and e.

    No, this is not possible. The recovery disk would format the whole HARD drive and therefore the partitions created on the HARD drive would be so removed.
    I recommend you to create a backup of the files before starting the recovery procedure.

  • Troubleshooting slow running under a user account from Win7 machine and normally with the other user accounts on same (or other) third-party app

    Hoping that this is not too off-topic, but I'm really running out of ideas...

    I have this trading program full license (TMPGEnc MPEG Smart Renderer 4.2) who has worked on my Win7/64 for several months, and in recent weeks, has become excruciatingly slow for every user interaction (but not for real computing), making it essentially unusable (1'30 to launch vs 3 normally, 30 "seconds waiting to launch a 'new project' vs.)<1s normally,="">

    When 'pending' launch application or respond to a command, 12% of the full CPU (8 logical cores on CPU Core i7 third Gen) is used by a single process: the offending application (look at the Task Manager, 1 logical core is used to +/-80%, a second for about 15% of this process). All other processes are still at 0% CPU usage.

    Of course, I tried & tested many things including full-/ re-installation of the application with a careful cleaning etc., corresponding registry entries software disabling AV (Avira free), .net Framework Repair Tool, etc... no change! The disc has been checked and is OK.

    Some interesting tips:

    This app worked fine for several months before the problem started abruptly a few weeks; I tried to uninstall .net Framework 4.5 updates to a date prior to the date of beginning of apparent problem, does not; I came back to an earlier version of the offending software: no change.

    But the most interesting observation is that the app works well at the launch of any other user account on the same machine Win7/64 (whether with the normal credentials or admin), so for me that means there should be no conflict of software on the computer, only something in my profile of the main user who causes the app behave so slowly.

    At this point, the Helpdesk of the seller looks distraught - too.

    Suggestions for troubleshooting?

    BTW: I consider that this computer is well managed, and no rogue or untrusted app sleeps there. my main profile is fairly heavily customized for my work, so I want to avoid workaround last resort would be to create a new user account as work environment main (besides the fact that I hate not to find the root cause of the problem)

    Hello

    Given that this problem is specific to the user's profile. I suspect that some programs that are installed or some settings in the profile translates into this problem. You can fix a corrupted user profile by following the steps in this article:

    http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

    I hope this helps.

  • Try to plug it into the router which is already installed and running with the other computers in the House.

    My computer says "Windows cannot find the certificate to connect to the network."  This computer is working - and an administrator.  This person could not help me.  Hope someone here can...

    The 'certificate' this computer is looking for is something that is used in networks wireless business and almost never in home wireless networks.

    The following assumes that you have given to your home network wireless (SSID of the router) "name" which is recognizable as yours and different from the network name to your work.

    The following also assumes that you are using Windows XP service pack 3 and you use to control your wireless Windows Wireless Zero Configuration (WZC) adapter.

    If none of these assumptions are not correct, provide the relevant information.

    If all of the above assumptions are correct, then

    • Open network connections (start > run > ncpa.cpl > OK)
    • Right-click on the icon for your wireless adapter and select Properties
    • Click the "Wireless Networks" tab.  This is where you confirm that "Use Windows to configure my wireless network" is checked. If it is not checked, stop here - you need to identify the utility that controls your wireless adapter before continuing. a good place to look is the icons in the Notification area (next to the time display)
    • Select your network (SSID of your router) from the list of "Preferred networks", and then click Properties
    • Click on the "Authentication" tab and uncheck the box for "enable authentication IEEE 802. 1 x for this network. "
    • OK your way out.

    If "allow authentication IEEE 802. 1 x for this network"is checked, but grayed out, so you can't change it, click 'Cancel' to return to the"Wireless Networks"tab and"Remove"the entry of your router.  Then click on "View Wireless Networks", select your router, click Connect and enter your password when you are prompted.

  • request to retrieve the value of the column and use in the other rows of the table

    Hi all

    I have a table where I maintain pairs name / value of a particular job.  Now, I would like to see some of the values of the rows passed to other rows in a table for example

    create job_name_value

    (

    VARCHAR2 (100) job_name,.

    name varchar2 (100),

    value varchar2 (100)

    );

    job_name name value
    TRGJOB% FPATH/ USR/LOCAL/TRGJOB
    TRGJOB% FDATECALDATE + 1
    TRGJOB$FNAME1%%FPATH.mywatchfile1.%FDATE
    TRGJOBFNAME2%%FPATH.mywathcfile2.%FDATE
    TRGJOB% FNAME3%FPATH.mywatchfile3.%FDATE

    can we write a sql query to produce output as below the objective is to use the value of fdate and fpath in the remaining lines. If there is no fdate and fpath then value should return such what or we need to use the stored procedure to achieve

    / usr/local/trgjob/mywatchfile1. CALDATE + 1

    / usr/local/trgjob/mywatchfile2. CALDATE + 1

    / usr/local/trgjob/mywatchfile3. CALDATE + 1

    Hello

    Since it cannot be '% FDATTE' or '% FPATH' (or both) then you need to replace each of them separately.  If the other does not, there 'replacement' will do nothing, but this will not affect the result of the other.

    Here's a way to do it:

    SELECT REPLACE (REPLACE (n.value

    '% FPATH.'

    p.value | '/'

    )

    , '% FDATE '.

    d.value

    ) AS output_value

    OF job_name_value n

    LEFT OUTER JOIN job_name_value p ON p.name = '% f '.

    LEFT OUTER JOIN job_name_value d ON p.name = '% FDATE '.

    WHERE n.name AS '\%FNAME%' ESCAPE ' \'

    ;

    I hope that answers your question.

    If this isn't the case, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.

    Report when the above query is to give erroneous results and explain, using specific examples, how to get the correct results of data provided in these places.  If you change the query at all, your postal code.

    Always say what version of Oracle you are using (for example, 11.2.0.2.0).

    See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

  • What operating system is good and easy to use

    What operating system is good and easy to use, Windows XP, Windows 7 or Windows Vista? I am now using Windows XP, I intend to install the new OS, which one is better. Please advice

    Vincent

    www.govtjobsdaily.com

    Pass Vista (requires a minimum of 2 GB of RAM) and install Windows 7 (just 1 GB of memory for the 32-bit version).  If you buy the "Full" version (not the upgrade version) from Windows 7, you can Dual Boot between XP and Windows 7 (not all XP software will be running in Windows 7 and dual-boot will allow you to continue to use any software that you place a high value on the). More information on dual-boot below.

    You must first check if your Windows XP-based computer supports Windows 7  Go the the computer manufacturing technical support web site and see if they list Windows 7 device drivers. No driver Windows 7 means that you can not (the most often install Windows 7, if this isn't the case find Vista drivers).

    Also run the Windows 7 Upgrade Advisor:
    Download and run the Windows 7 Upgrade Advisor to see if your PC is ready for Windows 7.
    It scans your hardware, devices, and installed programs for known compatibility issues
    gives you tips on how to fix any problems,
    http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

    Windows 7 Compatibility Center:
    http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

    Windows XP to Windows 7 Migration Guide
    http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

    Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
    http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

    ====================== Dual Boot ===========================

    Installing dual Boot with Windows 7 and XP
    (Read each method in this article and that fits your needs)
    http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

    EasyBCD allows to appear more user-friendly boot menu:
    http://NeoSmart.NET/DL.php?id=1

    J W Stuart: http://www.pagestart.com

  • I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

    I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

    You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

    Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

    Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

    Gene

  • My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

    My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

    Hello

    Check if the hard disk needs repair.

    Open the disk utility, located app in HD > Applications > utilities

    Select Macintosh HD on the left then click the first aid tab, and then click Run.

  • I'm a language monitor, I use Adobe Presenter to work properly on both, English, Spanish and presentations with the same software?

    I'm a language monitor, I use Adobe Presenter to work properly on both, English, Spanish and presentations with the same software?

    It shouldn't be a problem. Ultimately, presenter doesn't care what language the audio content is in, he will give all the same. The only problem I could see because of problems would be the appearance of the player. There Spanish lables, but they show only on a computer with the operating system in Spanish. If you want the student to view the two Englishmen and a version in Spanish on the same computer, you may have two versions of the language.xml file where you have one that has the help of English labels in the 'fr' section and the other where it has Spanish labels in the section 'fr '. You would then share those files in and out of the folder located at, C:\Users\ {UserName} \AppData\Local\Adobe\Adobe Presenter\Themes, you must publish a presentation in English or Spanish.

  • My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

    My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

    • Sync with iTunes on a Mac or a PC requires:

    iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

  • Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

    Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
    Mozilla Crash Reporter

    User Agent

    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

    Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

    Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

    Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

Maybe you are looking for

  • OE | OL | Data of WLM store

    Now that it seems that all NNTP went on the Web, do OE | OL | WLM users do with residual news messages? IOW, how we purge the data of news messages store is no longer necessary. "Thank you" Can a Mod or someone that move in a place where it will get

  • Start getting script error code 0/line48/tank 2 / failed to get the value of the application object of property is null or undefined

    whenever I start all the applications I get three error code of script, I was wondering how to stop this.

  • Configure ssh

    I want to configure ssh on my network. What ssh server is there for windows. I have a ssh client that seems to offer what I want. I don't want to use the windows user manager to manage accounts. I would use AAA for authentication but if I can't I wil

  • Pinning programs to the taskbar shortcut in Windows 7 HP

    Hello world I have a bit of a problem here. Not a long time with that I bought a HP Pavilion dv7 laptop 2250em ago provided Windows 7 Home Premium. When I first booted the device and went the pit installation process I first installed Mozilla Firefox

  • How to set the resolution of a sequence in first?

    I built a sequence that looked like, it was full frame (at least in width) in the window of the program, but when I export to Youtube to 720HD, its got a large black border on all sides. This particular sequence contains a lot of still images, with s