HP P 8470: JBL Flip 2 not to connect to HP 8470 P

Similar Questions

• Bluetooth is not pairing with speaker JBL Flip 2

  iMac bluetooth is not pairing with speaker JBL Flip 2. It worked well for 8 months. Yesterday, I paired with my iphone. Now the 2 Flip not will pair again with my mac mini, OS El captain. Bluetooth is activated, now detectable as «Of Deborah Mac mini» JBL Flip 2, not connected devices. I tried to enter the number on the speaker and the pair. Without success. The current number of bluetooth is different from the number of the enclosure. Please tell us how to fix.

  Debbie

  I disconnected the Flip2 and matched. It worked. Thank you.

• Cannot produce sound (JBL flip) bluetooth speaker

  Hello

  I have a bluetooth speaker portable flip of JBL that works very well with my smartphone etc.  My phone (Samsung, windows 7) connects with her and identifies it as a bluetooth headset, but I can't play the music through it all.  The laptop does not recognize as a 'reading device' or a piece of hardware in the 'sound' section of the control panel and I can't seem to make it work at all.
  Any ideas anyone?
  Thank you very much
  Mike

  Hi Michael,

  The problem could be caused in the Volume settings, the sound card or the driver.

  . Have you checked the issue with different laptop?

  Follow the steps below:

  Method 1:

  Try using the Audio playback problems troubleshooting to solve the problem. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  Tips for solving common audio problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 2:

  Try to install the drivers and check the status.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Once you've paired (connected) a device with a compatible Bluetooth Bluetooth computer, you can change the name of the device or enable or disable services for it. You can also control how your computer with this and other Bluetooth devices compatible pairs.

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  For reference:

  Add a Bluetooth device or other wireless or network device: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  To learn more:

  Contact the JBL Support:

  http://www.JBL.com/eStore/JBL/us/support/SPDP.jsp?pid=JBL FLIP  

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Sony Vaio 13 Flip do not charge to 3%

  Hello

  My Sony Vaio 13 SVF13N13CXB Flip will not charge when plugged in and remains at three percent. Battery icon says "plugged in, not charging."

  Charge light amber does not illuminate during usage and only flashes for a moment when I hit the power button to turn the computer on or off.

  Is there a boot program or process, that I have disabled potentially who charge controls of this laptop?

  A few days ago I installed the Iolo System mechanic and he disable programs a bit, so I don't know if it's what he does. I've been through, and it's not like I've disabled something vital...

  I have upgraded to Windows 10 in early November and there was no problems until a few days ago, so I do not think this update had no effect on the battery does not charge.

  I also tried the care function battery in the Vaio Control Center without result - I turned on and after-hours care function to try to revive the battery charges and neither have worked.

  I also disabled the computer and left it plugged in UAB and conversely the computer turned off and left unplugged overnight (this problem is ongoing since almost a week).

  I tried to solve this problem in Vaio Care and who does not, I even reset my computer.

  Is there a possibility of charge cable is defective and that's all that I have to correct, because that would be the simplest solution.

  And if so, where I acquire one of these load of the cables since these laptops on is no longer on the market?

  I hope this isn't my battery, aka, I hope I don't have to send for repair.

  Any input or advice is much appreciated. Thank you for reading.

  Patrick

  RESOLVED:

  I left my computer completely die in having not plugged and turn until he went into this weird reset mode where he was turning power on and off until he eventually just turned off for good. Then I plugged it it in and AHA! -the charging LED amber light turned on and the computer began to load. I think that the computer has become sensitive and he knew that he would die so he is healed itself to charge to stay alive (IE. He understood that I was killing and allowing it to become a brick, but it also has a will to live it fixed itself). I'm just glad, it doesn't have the arm and I worry about the internet connection because it can communicate with other sensitive machines and start to take over the world.

• Windows Flip does not work

  Original title: switching through aid programs.

  When I click ALT + TAB, the Windows Flip is not displayed and bottom gray box and weird appears instead of the box.

  I downloaded a program to make the cooler Windows Flip. but now it won't let me uninstall it. I quit the program and again.

  Please help :) Thank you!

  Hello

  Use restoring the system to a point before that.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =====================================

  The program is also probably in your startup group so this method if necessary to stop it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns shows you the complete list of files and registry locations
  where applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• all of a sudden nychtemerales Flip does not work in Premiere Pro

  all of a sudden nychtemerales Flip does not work in Premiere Pro, but made vertical flip - how can I fix?

  a works wonderfully in the previous amendments of the same project - just happening today...

  Hi Clubmudge,

  Works fine for me. If you have already restarted your computer and Premiere Pro, you can try to reset the preferences. Let us know if it works for you.

  Thank you

  Kevin

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• Skype 6.18.60.106 will not stay connected-old version works fine

  Hello

  When you use an older version of Skype, everything works great! But given that the old version of Skype now wont let me login and forces to download me use the version 'later' (6.18.60.106). This latest version will not be connected. He's constantly in "connection mode" icon. All the other internet connectivity works fine with multiple devices. ONLY this "latest" version of Skype has trouble. Cannot continue with an appeal for more than a few seconds before getting fired because of constant logout/re-connecting when you use the version "later."

  The system is Windows XP with service pack 3.

  DRM for any ideas on how to solve this frustrating problem. I use Skype as my "landline" and have come to rely on it using Skype and Skype.

  Marshal

  Try to uninstall the version 6.18 and install Skype 6.14.0.104 version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• My iphone 6 s more can not be connected to iTunes after installing iOS 9.2.

  My iphone 6 s more can not be connected to iTunes after installing iOS 9.2.

  What version of Windows or OSX run you on the computer to iTunes?

  You will need to run iTunes v 12.3.x or later on the computer to iTunes in order to 'talk' to a v9.2 running iOS device.

• FTP error could not establish connection

  Hello

  I am trying to connect to the ftp server to get a file of.

  I used the 'FTP get file.vi.

  here a screenshot showing the front and the block diagram:

  

  on the left, there are filezilla showing that the ftp server is very well connected and the remote path showing the files that I want to get one of them "log.txt".

  I filled out the same info in my labview vi... and when I type throws this error pops up

  {

  Error 0 occurred at the FTPOpen data connection: could not establish connection

  Possible reasons:

  LabVIEW: Error connecting to the GPIB driver or device.
  =========================
  VISA: (Hex 0x0) operation completed successfully.

  }

  I don't know what wrong I do... any ideas?

  Thank you!

  Thanks for your reply... I solved the problem ago... tour of false active to passive using the data connection in an active terminal...

  another error pops up that I have to put the same file type as the file that I ask for... I did the g:\file.txt local path and it workd very well...

  Thank you

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• Receiving the message: will not accept connections on port 7088.

  Why do I get will not accept connections on port 7088?

  Hello Thomas,.

  What you do on your computer when you receive this error message?
  What is the exact error that you are experiencing?
  Please see this link:
  http://support.Microsoft.com/kb/555375