HP Pavallion 2236tx g6: you want to increase the RAM
I want to know if it is possible to increase the RAM of my laptop from 12bg 8 gb or 16 GB. I use HP Pavallion 2236tx g6
Hello
Your laptop will support a maximum of 16 GB of ram (2 x 8 GB modules) - for example, an appropriate upgrade can be seen on the link below.
http://EU.crucial.com/EUR/en/Pavilion-G6-2236tx/CT6931954
Kind regards
DP - K
Tags: HP Desktops
Similar Questions
-
I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.
It will help in cases where the applications require more than 4 GB of RAM. Otherwise, there will be no noticeable difference. If you really want to increase the speed, an SSD is the best option. They cost about 3 x's + more than a traditional HDD of same capacity...
Ciao.
-
N203tx Clubhouse: want to increase the RAM!
Hello guyz
When I bought my laptop it has 4 GB ram(pre-installed)
now, I want to increase my ram... want to do 8 gb (a location is empty)
Now here's the question...
I have to puchase the ram from outside or hp will provide me with?
If hp will give me please tell me the cost...
my laptop model No. East Pavilion 15-n203tx
Hello
Please use the following tool:
http://www.crucial.com/USA/en/systemscanner
It will tell you the RAM you need and how much. You can buy from them, or use the information elsewhere. You can also buy from HP.
Kind regards.
-
Dell virtual disk are larger. You want to increase the size of the data store.
Hello
I started the implementation of a server ESXi 5.5 Update 1 this week. I didn't know Dell shipped the server with two virtual disks instead of one. I realized this _apres_ that I had already created the data store and setup a few virtual machines to the breast. I called Dell who sent specific instructions to increase the removal of the second (empty) virtual disk and add it to the main. In the end, I increased the single VD from 2 TB to 3 TB and I want to give the remaining space in my store of data.
I tried to follow the article here that explains how to do this via the CLI.
Well, he did not altogether. Fortunately, I was able to recover my datastore my setting start and end sectors to their original numbers. But I'm still left with this almost 1 TB of space that I can not attribute to the data store. After that I reread storage adapters in the client, the new Dell disk size resulted under measurement devices. Click on "increase...". ", generates the following error which led me on the way to the CLI method:
Call "HostDatastoreSystem.QueryAvailableDisksForVmfs" to object "ha-datastoresystem" on ESXi '[myservername]' failed.
I will paste my notes that I took everything by jobs. Things have exploded the rails when I put 4 partition size to the largest size. Any help, please?
---
I use that as a guide:
1 use start hardware device management tools to increase the capacity of additional disk to the device. For more information, commit your hardware provider.
This has been done. The new size of the virtual disk is 2791,88 GB (TB 2,79188)
2. open a console to the ESXi host.
Pretty simple.
3. get the DeviceID for the data store to change.
~ # vmkfstools Pei "/ vmfs/volumes/datastore1 / '.
System file VMFS-5, 60 extending on 1 partition.
File system label (if applicable): datastore1
Mode: public
Capacity 1971926859776 (blocks of files 1880576 * 1048576), 1042688245760 (994385 blocks) prevail, max size of the 69201586814976 file
UUID: 534e5121 - 4450-19dc-f8bc1238e18a 260d
Partitions split (on 'lvm'):
NAA.6c81f660ef0d23001ad809071096d28a:4
A couple of things to note:
a. the device for Datastore1 ID is: naa.6c81f660ef0d23001ad809071096d28a
b. the number of Partition on the disk is: 4 ' [...]: 4 "»
c. the prefix, "naa," means "Network address authority" the number immediately after is a single logical unit number.
4. Enter the amount of disk space available on the data store.
~ # df h
Size of filesystem used available use % mounted on
VMFS-5 1. 8T 865.4 G 971,1 G 47% / vmfs/volumes/datastore1
5 team of the device identifier, to identify the existing partitions on the device by using the partedUtil command.
~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.
364456 255 63 5854986240
1 63 80324 222 0
2 80325 8466884 6 0
3 8466885 13709764 252 0
4 13711360 3865468766 251 0
~ #
According to the table in article KB
4 13711360 3865468766 251 0 - primary #4, type 251 = 0xFB = VMFS, 13711360-3865468766 areas
| | | | |
| | | | \---attribut
| | | \---type
| | \---se finishing sector
| \---a starting from sector
partition \---Numero
Also note how the number of section start the old end sector number is + 1.
6 identify the partitions that need to be resized and the size of the space to use.
We want to resize partition 4. I don't really understand the last part of this sentence, however. Read more.
7 the number of sector end you want for the target data store VMFS partitions. To use all out at the end of the disc space, remove 1 of the size of the disk in the areas as described in step 5 in order to get the last usable area.
ESXi 5.x has a command to do this:
~ # partedUtil getUsableSectors "/ vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a".
1 5854986239
This means that we want 4 Partition of "naa.6c81f660ef0d23001ad809071096d28a" to be:
13711360 - 5854986239 (i.e. the end of the disc)
8 resize the partition containing the target VMFS Datastore using the command partedUtil, specifying the original existing partition and the desired end sector:
Using the above information, our command is:
resize # partedUtil ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 5854986239
9 step 8, the partedUtil command can report the warning:
He did not. Displacement.
10. the tables of partitions have been adjusted, but the VMFS data within the partition store is always the same size. Now there is an empty space in the partition where the VMFS data store can be grown.
11 launch this v vmkfstools command to perform a refresh for VMFS volumes.
Fact.
12 reach the VMFS Datastore in the new space using the command - growfs vmkfstools, specifying the partition containing the VMFS Datastore target twice.
vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 '.
It did not work. I got an error:
/ vmfs/volumes # vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' /vmfs/devices/disks/naa.6c81f660ef0d «»
23001ad809071096d28a:4 ".
Cannot get device head way /dev/disks/naa.6c81f660ef0d23001ad809071096d28a:4 information
Also the partition was very different to what I asked:
~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.
364456 255 63 5854986240
1 63 80324 222 0
2 80325 8466884 6 0
3 8466885 13709764 252 0
4 13711360 1560018942 251 0
I fixed it by running these commands:
~ # partedUtil resize ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 3865468766
~ # vmkfstools v
~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.
364456 255 63 5854986240
1 63 80324 222 0
2 80325 8466884 6 0
3 8466885 13709764 252 0
4 13711360 3865468766 251 0
Update:
Since it was such a new machine, not in active production, we have safeguarded the VMs management off the ESXi host. Then flattened the virtual disk, recreated, and then created a store of data with the right size. (TPG this time, naturally.) We put the management of virtual machines on the data store. For Windows virtual machines, we have restored the using AppAssure. Everything is ok now.
Need to add a new item to the list of punch: check what Dell has done the configuration of the virtual disks. :-)
-
you want to increase the value of mouse (release)
my script is...
flash.external import. *; so, we can use externalInterface
Import QueryString.as; so, we can use the QueryString class
var myPath:QueryString = new QueryString();
assignVariables();
custom function to handle all query string parameters
function assignVariables() {}
If the MyName parameter exists
If {(myPath.parameters.m1)
assign the text to the text MyName box
unescape() will translate/decipher the characters in the url
myName.text = unescape (myPath.parameters.m1);
}
If {(myPath.parameters.m2)
thisUrl.text = unescape (myPath.parameters.m2);
}
If {(myPath.url)
get the full url (including all parameters)
thisUrl.text = myPath.url;
}
}
var St = 12;
thisUrl.text = st;
my button script is-
{We (Release)}
St = st + 10;
}
There is nothing wrong with the code that show you it, although you shouldn't be put code on objects. You must instead use the timeline.
If the real problem is that the textfield does not display the increased value of TK, it is because you do not reassign the new value when you change
{We (Release)}
St = st + 10;
thisURL.text = m;
} -
Satellite A300-274 - I want to increase the RAM on the video card
I would like to increase the capacity of my video card.
I have a toshiba A300-274 co 4 GB of ram.Hello
Your laptop uses 4 GB of RAM?
Well, usually the graphics card chip supports memory video dedicated and shared system memory.
The sum of dedicated video memory and shared system memory is the total video memory.
The shared system memory depends on main memory.
In your case it s 4 GB of RAM.The laptop seems to supports 4 GB RAM max and this means that the shared system memory can not be higher it s already on the highest level.
In addition, you should know that you cannot assign all values manually everything runs automatically and is controlled by the graphics driver.
Welcome them
-
Pavilion dv6-3121 nr: increase the RAM memory
You want to increase the RAM of my laptop, I don't know the model or type I have to buy. It has 4 GB of memory, I want to move to 8 GB.
It is also known under the name of PC3-8500 DDR3-1066 SO-DIMM. This is what you need right here:
http://www.Amazon.com/memory-RAM-Pavilion-DV6-3120us-DV6-3121nr/DP/B008BYTN8W
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Satellite P100 - 221 PSPA6E: how to increase the RAM using SD or USB flash memory
Hello
I want to spend my memory (2 GB) more than that using SD memory or USB memory.
I have this happen? If yes how can I to do?My computer is:
Toshiba Satellite P100-221 PSPA6EConcerning
NevzatPost edited by: kanburnevzat
Hello
What do you do?
Using Vista Ready Boost?If Yes, please check this page from Microsoft on the Ready Boost feature:
http://www.Microsoft.com/Windows/Windows-Vista/features/ReadyBoost.aspxIf you want to increase your RAM, then only the memory module larger RAM would be useful for you.
-
Satellite L40 - 139 - I want to upgrade the RAM
Hello
My laptop is Toshiba Satellite L40 - 139 PSL40E model, operating system Windows XP SP3, 1 024 DDR2 RAM (667 MHz) (512 + 512).I want to increase the RAM memory using 2048 DDR2 RAM (1024 + 1024).
Laptop manual can not find if support * _dual-channel memory_ *, which requires a dual-channel-capable motherboard. Theoretically, this technology double data rate of the memory.
Someone has the manual for this laptop motheboard, or may indicate the site for download?Apologies for my bad English.
Thank you.Hello!
Satellite L40-139 can be upgraded to 2 GB of RAM. You can buy two modules with 1 GB of capacity with the specifications of DDR2 at 667 MHz.
If you use two modules, they run in dual channel mode.The manual of the motherboard or repair for Toshiba laptops cannot be downloaded. They are only available if ASP.
Good bye
-
NotebookPavillon HP dv6 1058el: increase the RAM
Hello
I have upgraded my HP Pavilion dv6 1058el from Windows Vista to Windows 7 and now with Windows 64 bit 10.
I want to increase the RAM memory.
Now I have 2 modules "2 GB 2Rx8 PC2 - 6400 S-666-12-E3" for a total of 4 GB.
I want to install:
- or 2 4 GB modules for a total of 8 GB;
- or only 1 module of 8 GB.
Please, could you tell me what and where to buy these new RAM module/s?
I thank in advance
Claudio
Well, here's the problem. Your memory is DDR2 which is obsolete. They make 4 gig DDR2 (not 8 GB) modules, but a pair of them will cost more $US and maybe as much as $150US. Too much to spend on an old laptop.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Pavilion g4: LM753LA: increase the RAM in HP Pavilion g4
Hello
I want to increase the RAM on my HP Pavilion g4. I don't know what is the model number, but I'm sure the product number is LM753LA.
Can you help me please to understand what I can buy RAM? Today it has 3 GB (I think there are two slots: 1 x 2 GB and 1 x 1 GB) and I would replace the 1 GB of RAM with 4 GB of RAM, that's good enough for me.
I understand that I must choose a memory as follows:
- 4 GB (to replace the 1 GB)
- DDR3-SDRAM
- 204-pin SO-DIMM
Does make sense for you?
Are there other features should I consider to make sure that the memory works in my notebook? MHz FSB, voltage etc. ?
Thanks a lot for your help!
Best regards
Mario
I found the following information, maybe it helps:
http://ICEcat.biz/p/HP/lm753la/laptops-G4-1064la-10772223.html
And this is my laptop:
Hello
The card says 8 GB maximum in two slots this means that you can use only 4 + 4 GB. If you have 6 GB, you will need to buy 1 stick of 4 GB and use existing key to 2 GB. CPU - Z shows you all the information you need: brand, RAM card...
Kind regards.
-
Increase the RAM, less corrupt files?
Hello
In order to reduce the damaged or corrupt files, you recommend to increase the RAM to reduce these events? I m using a computer with Win10, Intel I5, 8 GB of RAM and use server space to store my files.
Thank you
You don't want to hear this, but the upgrade of Windows 7 is hardly a great way to go. I back up all data, perform a reset of the entire system and then reinstall your applications again.
Start > Update & security > Recovery > reset this PC
-
Hi, I want to increase the ram on my hp 6159sl laptop. My laptop that supports mhz? Supports 1800 MHz or 1600 MHz?
Thank you
Hello
Please find the link given below might help you. Check the number of page 5 for more information to your memory upgrade.
HP Pavilion dv6-6159sl Entertainment Notebook PC specifications
-
How to increase the RAM memory on a virtual computer.
Hello!!!
My 4.1 infrastructure
vCenter Cluster with 4 ESXi host
I installed a VM with OS Linux Centos 5.5
VM has 2CPU, 2G_RAM, 7_GHD
I want to increase the RAM up to 4 G.
I have increase up to 4 GB with vSphere. But when I run MV, I run commands such as 'free' or 'top' and I discover who recognize only 3 GB
But here:
This behavior is expected and does affect adversely the operation of the guest. Physical address extension (PAE) will not allow the guest to recognize all 4 GB of memory.
Does anyone know how to increase?
Thank you very much.
JOs.e
As you may know, 32 bit OS' are limited less than 4 GB of RAM, unless the EAP is enabled, and it will impact your server when it starts to use on 3GBs of RAM.
I suggest that using a 64 bit OS, this way you can throw all the RAM you want in it.
Anyway check this: http://www.cyberciti.biz/tips/redhat-enterprise-linux-4gb-plus-ram-support.html
If you finish by activation of EAP, make sure you only take a snapshot of the VM as VM/backup.
-
Hello
My PC # is G42-490TU, product model # LR783PA #ACJ, processor - Intel Core (TM) i3 CPU M370.
RAM: 2.00 GB (1.86 GB usable), System Type: 32-bit operating system.
My PC is running very slowly lately. It crashes, freezes, pages become insensitive and therefore, it takes a lot of time typing. I use every day for work so, I want to solve this problem as soon as possible.
I would like to increase his speed to be able to work smoothly every day. Want PC to run fast.
Pls suggest faster, easier and less expensive to fix this.
How to increase the RAM? It cost to increase the RAM?
Also, reading the messages of prev I downloaded this link - http://www.intel.com/support/graphics/sb/CS-009245.htmto determine the chipset info and following is what I got. Pls know me if increase the RAM to 4 GB will solve my system is making him run fast and do leads not to any crashes / freezes etc.
How to increase the RAM?
Pls answer soon!
I'm waiting for your response forwarfd.
Thank you best regards &,.
Isha
Hi @HPIsha
I understand that you have performance problems with your laptop (speed, gels, etc.). I'm happy to help you with this.
I'd take a glance on the following pages; There will be an overlap between them, but each is useful.
Some software Applications may cause Windows to start or run slowly
Windows 7 stops responding or becomes very slow after you connect to the Internet
Set the performance of the slow system (Windows 7)
It is possible that it could also be a hardware problem, but it is most likely too much software, loading or running in the background and thus more taxing your processor. These pages can help with this and other common causes such as malware and other cousins of software.
Try these first, because these solutions are free. When it comes to hardware such as memory upgrades, you need to get the memory to do the upgrade, and it must be of the correct type to be usable.
You can check this link for the Service Manual: Compaq Presario CQ42 Notebook PC and PC portable HP G42 - Maintenance and Service of Guide. In it, you will see the type and compatible variety.
I hope this helps.
Maybe you are looking for
-
Randomly when I turn on firefox, go to a new page or open a new tab, I'll either get a full blown pop up (almost all of them are terrible, but one was actually a full TV episode that threw me for a loop. And it was a show I actually like) or I'll get
-
Firefox is unable to access the internet
Hello Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages a
-
Firefox 5: distortion when scrolling on web pages. appearance Wavey
There is distortion when scrolling on all webpages using Firefox 5. It doesn't matter how fast or slow scrolling, screen becomes wavey to stop scrolling. I uninstalled and reinstalled Firefox and did not help. This happens not using Safari or in docu
-
Using numbers to create a table where the value of the line increases automatically
Hello I created a table (pictured below) to help calculate my self-employed income: INDEX DATE HAVING RETURNED TO THE SELF-EMPLOYED £ A1 I want to create an index / of reference for each line so that I can connect to receipts. I like the index / refe
-
error 646 when installing updates
I got a lot of noticesto February windows update tried installing updates and will not accomplish.