HP pavilion 15-e100: SMART disc error

Similar Questions

• HP envy 14: Smart disc error

  When I start my PC it shows 'smart disk error (301).

  The hard drive has failed/is a failure and should be replaced. If you are still in warranty HP will replace it. > >Contact HP if not a laptop to retail SATA hard drive can be used. Just be sure to get one of at least equal quality of the original in order to use recovery media to install Windows. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• HP probook 4445 s... Smart disk error

  I have a hp probook 4445 s.  win-8. 32-bit problem is smart disc error... why this required problem... How to solve this problem... Thank you...

  The result of the test hard drive means that the hard drive needs to be replaced. If you are still able to connect to Windows, then do it as soon as possible and copy everything you want to save to an external drive.

  If your laptop is still under warranty, contact HP for a warranty replacement drive. free standard warranty is one year from the date of purchase. Check the status of the guarantee

  You will need your recovery disk series or usb recovery media that you have created previously in order to perform a recovery image of origin on the replacement hard drive.

  The following picture of the maintenance of your laptop & guide service shown compatible alternative specifications or hard disks in option. You can also use an SSD if it has sufficient storage capacity.

  

• HP Pavilion dv6 - 3320st - Smart hard disk error - replacement?

  Hello

  My laptop is hp pavilion dv6-3320 st and I get smart disk error. I understand that my hard drive is a failure and I need to replace it.

  Unfortunately, I do not know how to find a compatible hard drive for my computer.

  Here's my computer;

  http://support.HP.com/us-en/document/c02735818

  and the hard drive I think to replace;

  http://www.Directron.com/wd7500bpkx.html

  Any help will be much appreciated.

  Kind regards

  Your laptop has a regular 2.5 "SATA hard drive installed.

  Any 2.5 "SATA hard drive should work just fine.

  The hard drive that you have access to will work fine.

  If you do not use a lot of space on the hard disk, I recommend to install an SSD. It is much faster but more expensive.

• HP Pavilion Notebook v024ca 14: SMART disk error

  Hello

  My laptop says SMART disk error.  This occurred just after installing windows 10.

  I tried to run a hard drive test he gave me this error: 9ag56w-77m7nr-mfpv7f-609e03.

  The laptop is still covered by the warranty.

  Help, please!

  SMART errors mean that the hard drive is about to fail.  If the laptop really is "still covered under warranty.", then have a talk with the support to have it fixed.

• HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  My HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  Windows 7 64 - Bit on 650 GB of disk.

  Error: "the system support does not support this computer. You are not able to restore the system with the media. »

  I'm about to order the recovery disks from HP and with a bit of luck, being able to bring this notebook to conditioning factory with all the correct partitions and sizes, after that I have format the hard drive.

  Yes, our recovery disks will return your device to factory State. All the software that came with the unit will be resettled. What you have added, you have to reinstall.

• 303 disc error

  My Pavilion G6 threw a 303 disc error.  HP sent me a new HARD drive and a recovery kit, but I can recover?

  I have backup via Virgin Media must therefore be able to get videos of music/etc, but which, on all downloaded programs.

  for example. WinZip, Norton 360, Spotify (I use a lot) and many others.

  The programs that I found on IE really solve 303 errors, I have my doubts?

  Details of the PC: -.

  Model: G6-1371ea Pavilion

  Product no.: A9J83EA #ABU

  Drive: HTS54757A9E384

  Purchased: April 4, 2012

  Hello

  An error 303 is a disk failure short self-test and shows generally a physical problem with the drive - IE areas that no longer can be written or read.  There are certainly autour software that can mark these 'bad' sectors should not be used and the reader can well then make a diagnosis, but it's really just hide the problem.

  About your software, supplied with your new HARD drive recovery disks will reinstall nearly all of the original software comes with your laptop, but you will need to re - download and install third-party applications such as Spotify again.

  Kind regards

  DP - K

• How to remove a Smart Tag error: bad URL - ST_REJECTED_QUERY_STRING

  Hello
  Whenever I entered this site www.gcr.com.my, this message "Smart Tag error: Malformed URL - ST_REJECTED_QUERY_STRING ' will appear followed by a dialog box with the Web site named www.USAGC.org until I closed everything, but this annoying message will reappear.

  Can you please help to get rid of them.

  TQ.
  Chin

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Sony Handycam DCR-DVD305 Disc Error C:13:02

  I get disc error C:13:02 when you try to get the video on the disc. I can't get the drive to read in the computer, either. How can I see if there's some videos about it. It is a double-sided disc, one side work and not the other. It's very frustrating. Any suggestions?

  Hello
  Welcome to the Forums of Discussion of the user.

  Please refer to page 127 of the user manual and codes error of research by clicking on the following link:

  http://www.docs.Sony.com/release/DCRDVD105-205-305.PDF

  Try saving another disc using the camcorder and check if the camcorder works well. If you believe that there is a problem then contact the Sony Support by clicking here:

  http://eSupport.Sony.com/us/p/support-c... D305 & LOC = 3

• 'No disc' error on the Toshiba BDX1200KY blu - ray player

  (Sorry, there seems to be no jury of blu ray player)

  I bought this drive blu - ray 3 months ago and a week ago I had a 'No Disc' error when I tried to play a DVD. The machine plays all my DVDs without problems before if is not a concern for the region. Now, he will not play one of my DVDs and they are all clean and intact. However, she still plays my blu ray discs without any problem. I bought a blu ray disc lenses cleaning hoping that would solve the problem, but it didn't. So, I bought a DVD lens cleaning disc but being a DVD itself, she also returned an error of 'no disc '.

  The problem is that this is my second machine in about 6 months. Exactly the same thing happened with my previous Toshiba BDX1200KY and the electronic shop guys couldn't get out and gave me a replacement so it is very likely that the fault is mine.

  These machines have distinct popsicles for Blu Ray and DVD? Can someone suggest a solution. I smoke and I often stop the machine. It is pointles continuing until I have it worked.

  Unfortunately, it's a computer / laptop Forum options so I m afraid there is not a lot of people who can provide you with solutions

  However, I put t think that this player is equipped with different laser lens it s a goal that must manage all disks

  My player couldn't handle all the disks because the goal was dirty. I unmount the drive to access the lens and managed to clean it with a cotton tip and a little alcohol.
  So it helped in my case

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Opening of the Pavilion 17z-e100

  Hi all

  I help my parents with their new laptop, a Pavilion 17z-e100 CTO. I searched here and everywhere else online for instructions on how to open the bottom panel access the disk hard/RAM/etc, but all I've found is for older models that do not work in my case.

  I'm usually pretty good art to find this kind of things out, but since it's new, I'll be sure and ask around before you start to tinker. There is an obvious screws under the battery, but this deletion is not enough for me to take down the sign. Anyone know what I'm missing? There are a few teeny tiny screws in the battery bay as well, but they seem not at all related to this Panel. Thanks in advance!

  Thanks for the reply! You are partially right...

  The screw that I mentioned is the only one keeping the Panel in place. Once the screws removed the Panel Slides down (front of the laptop) and then comes off easily. I tried to force upwards, but nothing loving or move. I can't believe that I didn't understand this earlier. I'm so accustomed to these panels lifting directly, but I like this design a lot more.

  I hope that this information will help others with the same question!

• 'Burning disc error' when you try to burn a DVD

  Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?

  I have a computer laptop advent 9117.

  Hi Adam,.

  What is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."

  http://support.Microsoft.com/kb/934544

  Let us know if it helps.

• Need drivers for Pavilion 17Z-e100 - network and usb Win7

  I need drivers to support Win7 on Pavilion 17Z-e100. Ethernet controller, network, PCI Devie, SM Bus controller, & usb controller.

  Hello:

  These drivers should work for you...

  First, install the amd chipset driver and restart.  You want the third file listed on the webpage (49.7 MB).

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then, install the beta amd catalyst driver and restart.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  Audio: Accept the agreement, download and install the driver for the second on the list. "

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownT...

  Ethernet: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...

  USB 3.0: Install both.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  Card reader:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  3D Driveguard:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en...

  Webcam:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127341-1&cc=us&DLC=en&LC=en...

  For the network controller, proceed like this...

  In order to obtain the driver for the wireless card, do like this...

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN

• How to fix still "no disc error"?

  When you try to start again CS5.0 I get an error box "Encore.exe - No. disc.  The box says "there is no disk in the drive.  Insert a disk in the drive\Device\Harddisk8\DR8.  There are 3 buttons: 'Cancel', 'try again' and 'continuous', none of them get rid of the error box and I can not open yet.

  I reinstalled again, no effect.

  I disabled a device in position 8 and the box error message changed to "there is no disk in the drive.  Please insert a disk into drive\Device\Harddisk4\DR4. "I have reactivated the device and the error box has returned to the original"... \DR8. " »

  Appreciate any help on how to solve this problem.  Thank you.

  -Dave

  Stan, John, I wanted to thank you for your help and the problem of 'no disc' is corrected.

  Here is the solution:

  -J' have been able to get in again by opening an old project that did not involve an ISO file

  -I didn't once again, I opened an old project that had an ISO on a HD file (HD auto changed its name since J: K: note, I had not been able to return to the J: indicator because the missing ISO file was not resolved then J: remained "in use" and unavailable)

  -In the old project, I changed the location of the ISO file of the drive J: missing on my C: drive using the Build menu

  The 'no disc' error went, that still works normally now.

  I hope this can help someone else.  Once again, thank you.

  -Dave