HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

Similar Questions

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Unable to connect to my wireless network

  I recently discovered that my wifi for vista would not connect to the internet even if the signal is 100% solid.

  My wireless House has a WEP encryption and it has already been saved on the laptop but since yesterday it ask me the WEP key when I try to connect it and wouldn't connect even if only the WEP pass has been entered correctly. The message that usually appears at the end is "windows is unable to connect, try the other network", even when I tried my companion's unsecured network.

  Here's what I did so far, but without success...

  I checked the Wireless driver from Device Manager and it works properly. I even try to update the driver and received a message that the driver is 2-update.

  Here's what I got when I tried to use "ipconfig/all".
  ..................................................
  Windows IP configuration

  Name of the host...: AZOU
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbp
  s USB 2.0 network adapter
  Physical address.... : 00-22-5F-36-AE-19
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-7A-3C-AE
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1ad:202c:5412:8070% 10 (Preferred)
  IPv4 address...: 192.168.2.35 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: May 2, 2009 19:58:15
  End of the lease...: June 9, 2145 03:09:10
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  194.168.4.100
  194.168.8.100
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  I can use the Ethernet cable to connect and this is killing me lol seriously... can anyone pls help me, I want to get this working wireless!

  Thank you

  Hello!

  What computer Toshiba laptop and OS do you have?

  In your case, I would check the Web from Toshiba site for an update of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried to reset the router? Unplug the AC adapter from the router, wait 5 or 10 minutes and then try again.
  Another laptop works on the router?

  Good bye

• Pavilion p6-2310: can no longer connect to our wireless network

  All of a sudden our PC no longer has a connection to our wireless network.  We looked at the list of installed programs and it shows Ralink RT539OR 802.11bgn Wi - Fi adapter has having been installed today - but we have no install anything today.  Is it a coincidence that shows like this and all of a sudden we can access our wireless network?  How do we get working again that it is necessary as soon as possible?  Thanks for any help.

  Thank you.  I'm like a dog with a bone when it comes to these things and not rest until I get solved.  So, I found something in the knowledge base of the forum who pointed me in the right direction.  Using Device Manager we uninstalled and reinstalled the card wifi, and bingo, it works again.  Ceases to amaze me, but how a computer works fine 1 minute and then the next time that you are never going to use it, boom, something does not work.  And you did nothing to change anything so that it does not work.

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Unable to connect to a wireless network for machine under windows 7.

  I have a Lenovo Ideapad U450p with Intel Centrino 2 chipset.

  The wireless card is Intel(r) WiFi Link 5100 AGN

  Completely updated the driver (in order to solve the problem)

  For some reason I can't connect to any wireless network. I don't think it's a problem of router, the router can connect to other devices (there is no MAC filtering). I also tried to connect to the hotspot from my phone.

  I can see all available wireless networks, so I think that the scanning function does not work correctly. I just can't connect to one of the networks. I tried to change the password wireless, even tried to disable wireless security.

  Thanks in advance!

  Hello

  Method 1:
  Check out the link and follow the steps.
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
  Method 2:
  You can also visit this link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 3:
  Check out the link and follow the steps in section allows you to configure a wireless connection.
  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• HP ENVY 4520: Unable to connect to the wireless network

  My new printer is not connecting to my wireless network.  My router, it sees and accepts its letters of nobility, but then the printer is connected.  It will be displayed on my network for a second or two, but never stays there.

  I printed the "RESULTS of the WIRELESS NETWORK TEST" and he tells me that "the MAC address filtering can be activated on your wireless router that can prevent your HP printer to connect to your network without wire during installation.  MAC address filtering is disabled.

  I have connected many other features to my wireless network by pressing the WPS button and it begins to appear, but does not stick.  I also tried to manually enter the password without success (and the WPA key).

  Try to set up the printer with a static IP address that is not your router DHCP scope.

• Unable to connect to a wireless network with Windows 7 computer laptop.

  After resetting my router netgear wireless home network, I have not been able to access my own network with my laptop. I already had access to the internet with a wireless ethernet cable and ankles bound to the router. After reset the netgear router, I was able to access the internet from two other laptops XP and an Acer mini wireless with no problems at all. But my new laptop Toshiba with Windows 7 could not connect, even if he could detect the network. I tried all day even resort to the ethernet socket and wireless cable, but even that would no longer work. I was able to connect using this same cable attached.

  Hello

  Seems that the Wireless does not work on the Dell.

  This is the process to try to find what wrong with it.

  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Satellite M645-S4070 - unable to connect to the wireless network

  Hello. I have a Toshiba Satellite M645-S4070.

  Lately, I have no problem connecting to networks wireless in my office. Until this morning when I start my laptop, I can't connect to the internet more. I already use a recovery disk to check if I can solve the problem but nothing is. When it connects to the LAN it runs.

  Thank you.

  Hey,.

  The wireless network adapter is listed correctly in the Device Manager? It is maybe just disabled, and you can enable/disable using FN + F9 key combination.

  You should write more details not connection might mean everything, so first of all, that you should check if the wireless network adapter is recognized and activated correctly.

• Unable to connect to a wireless network

  I am able to connect to my workplace wireless, but not at my sisters House. The router is linksys and my f700 compaq wireless card is atheros. Network is detected and we know the wpa key. When I try to connect it says unable to connect to this network... Please help... Thank you...

  The situation you are in seems that this problem is only between lynksis router and laptop.

  Try changing from 6 to 11 wireless channel.

  Try to also replace wireless abg to bg or g only mode.

  All these changes can be made through the router so call him lynksis.

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Unable to connect to the wireless network and also impossible to uninstall the network wireless driver

  Original title: wireless network card problem

  

  I have a laptop HP g series.

  I am not able to connect to Wi - Fi. The network symbol that appears at the bottom right does not appear. Solve the problem. He said it was a problem with the driver for the wireless network card. I tried to uninstall the driver, and this is the error I get.

  Hi Jimmy,.

  For a better understanding of the issue, I would need more information on your side.

  1. How do you uninstall the network driver?

  2. What is the number of the model of the laptop?

  This problem could occur due to corrupted wireless network driver.

  If you haven't tried these steps, I suggest to uninstall the driver from Device Manager wireless network and install the latest driver for the wireless network on the site of computer manufacturer.

  Step 1: Uninstall the wireless driver.

  a. Click on the Start button , and then type Device Manager in the Search.

  b. open the Device Manager and double-click the network adapter to extend.

  c. right-click on the driver wireless network which entered and select Properties.

  d. in the window open, click the drivers tab.

  e. in the tab drivers , click the Uninstall option.

  Step 2: Install the latest driver for the wireless network on the site of computer manufacturer.

  HP G laptop support

  See the articles for more information.

  Wireless and wired network problems.

  How can I troubleshoot network card?

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.