HP Pavilion 15-n096sa: replacing the wifi card

Similar Questions

• Replacing the WIFI card

  I have a Compaq NC6120 running XP I want to upgrade to Windows 7, but my WIRELESS card is not supported. If Im trying to find a WIFI card that works in my Compaq NC6120 with Windows 7 so I can connect wireless to my HP Pavilion Desktop which is running Windows 7.

  Any ideas?

  Hello:

  Not only the wifi card is not supported, but none are fully supported video card.

  I can send you the link to a driver that will allow you to change the resolution of the screen and have the graphics acceleration, but you don't have Windows Aero on a nc6120.

  I looked the cards available for your laptop supported in the maintenance manual wireless and chose this card as being compatible with Windows 7:

  Hewlett Packard Part # 381582-001 Intel 802.11 B/G WM3B2200BG.

  The card must have the HP part on that number or your laptop does not start even upward except if the unsupported card is removed.

  Best bet is to get a used but tested and functional condition on eBay. Search for the part number.

  This is the cheapest I could find.

  http://www.eBay.com/ITM/original-HP-Compaq-NC6120-WiFi-wireless-card-381582-001-/120862412936?PT=LH_DefaultDomain_0&hash=item1c23f61088

  Now for the video card driver...

  It's the one you need. Windows Vista Business 32-bit of the nc6220

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-47264-1

  Instructions to install...

  Download and run the file. It will error out and give you an error no operating system support. Close to that.

  Go to Device Manager and click on your VGA adapter. Then click on the driver tab, click on set to update driver.

  Select the 'Browse my computer for software' and navigate to C:\SWSetup\sp34749.

  Make sure that the include subfolders is selected and the driver should install.

  Paul

• Replacing the WIFI card for laptop G72

  Hi all

  I think that I have given up trying to fix my current card WiFi RALINK RT3090 because for some reason any it simply stopped working since last Thursday.

  Am looking to buy a replacement one but don't know with all these terminologies

  The repair, I found the sub elements:

  -Atheros AR9285 802.11b/g/n WiFi adapter 1 1 x
  -Module WLAN 802.11b/g/n 1 x 2 Intel Centrino Wireless - N 1000
  -Realtek RTL8191SE 802.11b/g/n 1 x 1 WiFi adapter (for 1.0 and 1.1 only models)
  -Adapter of WiFi 802.11b/g/n 1 x 1 Broadcom 4313
  -4313 Broadcom 802.11b/g/n WiFi 1 x 1 and 2070 Bluetooth 2.1 + adapter Combo BDU (BT3.0 + HS ready) (for models 1.1 and 1.2 only)
  -802.11b/g/n Ralink RT3090BC4 1 x 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter (BT3.0 + HS ready) (for models 1.1 and 1.2 only)

  All I'm looking for is something that connects with my router that is currently configured for 2.4 Ghz (can go up to 5 GHz but not looking for it) and get the best connectivity possible and if I choose to use my Smart TV with DLNA technology.

  Q1: Will all these above mentioned work card WLAN on my G72 (it is B02SA or B20SA) portable or can be picked up any other WLAN card (mini/low-profile if I'm not mistaken, that's what we call them)

  Q2: What is "for 1.0 and 1.1 only models"?

  Q3: Which of them will give me better speeds and possible connetivity?

  Q4: My previous card Ralink RT3090BC4 gave me several questions whenever I have to reinstall my OS so don't want the hassle

  Thanks to all in advance.

  souls33k3r wrote:
  Thanks a lot for the answer once for more erico.

  I'll keep your recommendation in mind.

  You would be so kind to answer my original question which will help me a lot

  Q1: Will all these above mentioned work card WLAN on my G72 (it is B02SA or B20SA) portable or can be picked up any other WLAN card (mini/low-profile if I'm not mistaken, that's what we call them). Check in the download section to check if the drivers are available. This nmeans that support BIOS is present.
  Q2: What is "for 1.0 and 1.1 only models"? It's information that can only be obtained at HP internally. It is likely to be market designations for models for the specific world regions. 
  Q3: Which of them will give me better speeds and possible connetivity? Module Intel uses the drivers Intel is more reliable.
  Q4: My previous card Ralink RT3090BC4 gave me several questions whenever I have to reinstall my OS so don't want the hassle. I also had problems with this module in the past. I prefer Intel and Realtek.

  You should consider browsing the forums on the sites of BIOS mod your laptop from warranty. There is a risk attached to the use of modded BIOS, you will have to accept. Modded BIOS files can remove blacklists of module.

• HP ENVY x 2 CTO 11 t-g100: HP ENVY x 2 replacing the WiFi card

  Hi, I want to improve my HP ENVY x 2 CTO 11 t-g100 Wi-Fi card «Intel wireless 7620-N"to «Intel wireless 7620-AC»

  "Intel wireless 7620-AC" will be acceptable to use, or should I try a new?

  I have improved my Split X 2 map of 7260-ac and it works perfectly.  No problem with WiFi or Bluetooth.  I guess that the envy of X 2 will be fine with the upgrade as well.

• HP pavilion e073ed 17: you can replace the graphics card for hp pavilion 17e073ed

  I have a HP pavilion 17e073 ed and I want to replace with a better graphics card. The problem is that I can't find anywhere if I can replace the graphics card. I want to replace it for the best benefits of games. I already bought an SSD and some more RAM.

  Hello:

  There is no graphics removable, replaceable and upgradable 'cards' in your laptop.

  The graphics quite part of the motherboard, and to improve the graphics, you would have to see if there is a motherboard listed in the guide service and maintenance for your laptop that has better graphics.

  Replace the motherboard would be a labor intensive and expensive project.

• Replace the video card on Pavilion m9450f - what "s the orphan?

  It probably doesn't matter, except that it is driving me crazy.  I just replaced the graphics card on a m9450f.  The original was a GeForce NVidia 9800 GT with 512 MB of memory, I do not know the manufacturer.  The other, a PNY NVidia Geforce GTX 550Ti jumped to the (yay for empty arrays!) and seems to work very well.

  Here's the thing.  The old card, in addition to the connection of normal PIN on the bottom and the normal power at the end of the map, a connection two sons near the front of the card on the side not pinned. A twisted pair red and black fell from there on the edge of the motherboard.  I'm unable to find information on what connection did and why he didn't need to do this on the map again, more powerful. I feel that my IKEA futon will collapse because of the surplus allen screw when I finished editing.

  Can anyone help?

  Hello

  The two sons who came from the card would the SPDIF header on the edge of the motherboard.  This allows the motherboard route audio digital HDMI video cards that do not accept no digital audio via the PCI-E slot.

• replacing the graphic card Nvidia Gforce 8500 gt

  I have HP Pavilion m9100t desktop computer (product # KC832AV #ABA) which I recently upgraded to windows Vista 8.1. The graphic card system kept crashing and I was hoping that the new operating system would be useful, but it hangs again. I do not play games other than my Hoyle card games on the computer. The system features a TV tuner and watch TV Online. What graphics card can I replace the NVIDIA card?

  So, sorry. Reviewed your recommendations and I see that they have both a HDMI. I'll check see if I can find locally before you buy online. Thank you for your help.

• No video after having replaced the graphics card and power supply

  I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

  Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

  From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

  In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

  The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

  After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

  Does anyone know the purpose of the wires that were connected to the top of the Tower?

  They would cause they cause this problem if they are not correctly connected?
  Any suggestions for the possible causes of the absence of a signal from a video card?

  I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

  Now I feel kind of stupid, but I know better next time...

• Replacing the video card required

  I have a HP Pavilion Elite m9070.uk, an office, which is about 3 years old & the video card is not & should be replaced emergency.

  The current broken unit is a PX of Leadtek 8800 GT from nVidia with 512 MB memory on board. The computer's power supply is from Liteon PS-5301-08HF original unit rated @ 300 watts power.

  I need to replace the video card with a new card from nvidia used one place, what can I serve in the more recent range GTX std & not overclocked.

  Please advise?

  Hi Dave,.

  Thanks for your help, have now bought a new new Geforce GT 440 of * Bay for £35, which works brilliantly!

• Satellite L20-149: is it possible to replace the video card?

  is it possible to replace the video card in my laptop L20-149?

  because I can not play on my video card intel because its slow and boring... don't worry not about the warranty because its not valid anymore

  No, it is not possible to s.
  Why? I could list several points why it s not possible, but this question was asked several times in this forum.
  He just use the Toshiba advanced search forum and search for updated graphics card.

• Can I replace the graphics card on Tecra M2?

  I have a Tecra M2 and the display shows verticle lines across the entire screen. These lines also appear when plugged upward on a normal screen.
  I checked Device Manager and it says that the nvidia card "cannot start." The problems had me uninstall and won't reinstall, no luck.
  Next option is to unplug and then plug back in, but is it possible? If it is separate would rather just replace the card. Thanks for any help.

  Chase

  From your description of the error, this really sounds like a malfunction of the GPU (graphics processing unit).
  Unfortunately, it is a serious offense and if a replacement of material you will not be able to fix this :(

  It is a case value because you can not only replace the graphics card. You need to replace the whole motherboard because the GPU is soldered on the Board and cannot be removed easily.

  There is nothing to my buddy.
  Seems that you need to contact a support technician.

  Good luck

• Can Qosmio G50 - I replace the graphics card?

  Jin

  I would like to know if it is possible to replace the graphics card in the default value of G50 (9600gt) with a better (for example 9800gt).
  Thank you for your help and information.

  I am dissatisfied with the performance of default graphics card. Is there another way to improve performance?

  Hello

  I m wondering really that you are not satisfied with the performance of the 9600M GT graphics card. What games do you play?

  Friend of me has the same graphics card in his notebook and it can play all the games. For a laptop, the 3D performance are really good I must say. :)

  About the graphics card update I can recommend this:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Where the WiFi card is located on Satellite T130 - 11H

  Hello

  I had problems with my card without wire wireless where he fails on a regular basis as indicated on the following link
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=295029

  But now I would like to get my hands on the question
  So, I would appreciate if someone can tell me where is the card wifi for my laptop model.

  My laptop are:

  Toshiba Satellite T130 - 11H
  Serial number: X9110014W
  Windows 7 Home Premium
  64-bit operating system
  Genuine Intel processor

  I had someone with a look that says the motherboard and the wifi card is fine, but I want to study the issue due to be sure. so please guide me to the right direction to get to the wifi card.

  Thank you very much

  The WLan on Satellite T130 card is connected to the motherboard as indicated on this [photo: http://www.irisvista.com/tech/laptops/Toshiba-Satellite-T135-T135D-T130-T130D/body-big/Toshiba-Satellite-T130-T135-disassembly-20.jpg]

  You will need to disassemble the laptop everything to access the wireless network card.

  I found a statement in the internet (www.irisvista.com) how do this, but each computer laptop procedure disassembly is not easy and all you are doing is at your own risk.

  Greetings

• Satellite L500-12 q - change or replace the graphics card

  Hey guys I'm new in this place
  Could someone change or replace the graphics card on Satellite L500-12 q with a better game card?

  I searched the Web for a better card, but couldn't find any info on my laptop with the exception of increasing the performance of certain software such as mentioned in a youtube video

  Please someone heeelp

  Hi samuniv,

  As you can read in 100 other threads, it of not possible to replace the graphics card because it s fixed/soldered to the motherboard. Therefore, an Exchange is not possible.
  You should also check out this interesting article:

  According to the specifications of your laptop is equipped with an Intel GMA 4500 graphics card. The card is good for the office and Windows but it s not a graphics card for new 3D games. You can play older games on the low resolution of the screen, but newer games will not run.

• Tecra M4: How to replace the WLAN card

  Hello
  I have a Tecra M4 laptop and want to upgrade my wireless card, is this possible without opening the whole case?
  Most of the NB I know have these cards below the keyboard, or behind a clean cover accessible from the rear. Tried both, found nothing.

  Thanks in advance

  Florian

  Hello Florian

  I fear that you will not be able to Exchange only WLAN card. The WIFI card on this laptop model is placed on site so stupid and laptop must be disassembled. Please be careful if you want to do this alone.

  To be honest you shouldn't do this without maintenance manuals. One small mistake and you can damage the sensitive plastic components inside your laptop.

  Furthermore, this model Tecra a pretty good and quick WLAN card. G standard, if I remember well. I have the same card on my Tecra and data transfer is OK.

  What WLAN card you want to use now?