HP Pavilion 15-n203sx: problem of usb 3.0 of 15-n203sx HP Pavilion with Windows 10
I managed to install all the Windows 10 and some drivers Windows 8.1 left.
My problem is when I connect my external usb3.0 HARD drive to the USB 2.0 on the right, it connects successfully, but when I connect it to two ports usb3.0 on the left, the HARD drive lights, but it does not appear in windows. I suspect that the ports are not fed enough current (amperage).
I suspect that the reason is the generic driver from Microsoft for the eXtensible Host Controller:
I tried to install the driver Windows 8.1:
HP 3005pr USB 3.0 Port Replicator driver 7.6.56275.0 Rev.A
or https://downloadcenter.intel.com/download/22824
But all have failed to install.
Help, please!
Hi @ahmedz_1991,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-n203sx and problems with USB 3.0 does not properly. Here is a download that I found for Windows 10 and HP 3005pr USB 3.0 Port Replicator which should solve your problems. You need to uninstall both Intel that are listed, and then install the Windows 10 we. Once the installation is complete, restart your laptop and check the drivers.
I hope it suits it.
Please let me know how it goes.
Thank you.
Tags: Notebooks
Similar Questions
-
I have a HP Pavilion with Windows Vista a6214x. About 3 years ago, I created my recovery with 2 discs dvd - r system
I never had problems by creating discs and my HP troubleshooting and maintenance guide says that I could use either
the dvd - r or dvd + r. But the other day, technical support of HP said use the dvd + r to create system recovery discs. If this is the case, I have to start all over again and create Sytem recovery discs on dvd + r?
Donkey #1
The DVD creation has always been a unique event. I'd be surprised if it worked.
HP can tell you how to reset the utility.
Reviews by HP on the use of the DVD + R
-
How to calibrate color on hp pavilion with windows 10 g7-2202
Hello!
How to calibrate color on hp pavilion with windows 10 g7-2202? I am a photographer with limited funds, so I can't buy a dedicated monitor again. I would like to get the best possible colors before it goes to print. I got prints back that doesn't look anything like the monitor. It is therefore difficult for post production.
Thank you!
Hello Brenvon62,
Color grading is already done by Windows on laptops, but if you want to calibrate, and then follow the steps
- Click Start
- Search "Control Panel."
- Click on appearance and personalization
- Click on display
- In the left column, click the calibrate color option
- Follow the on-screen instructions
I hope this helps! Please mark this procedure as an answer if this helps and Bravo will be appreciated.
-
How can I restore my system HP Pavilion with windows 8 to factory settings
I have a new (2 months) HP Pavilion with windows 8. I am trying to reset to factory settings and need help.
Hello
There are three main ways to restore your laptop to its 'Condition of the factory' - see the document at the link below.
Performing a HP System Recovery - Windows 8
Kind regards
DP - K
-
Refresh utility does not not on my hp pavilion with Windows 8.1 15-n010tx system
I recently bought my system from hp with wondows pavilion 8
After that I was offered an upgrade to windows 8.1... now I want to reinstall the operating system using Refresh utility but it shows the message that some files are missing... and it cannot refresh
kindly guide me someone...
Hi LEN1995,
Sorry to hear about the problems with Windows 8.1. Did you create a restore point in Windows 8 before you upgrade to 8.1? It should create on its own, but if you have another one you could try it. Is that what you were referring to when you mentioned the update utility?
According to Microsoft if there is an error then you will need the original CD or recovery CD. I saw your other post where you asked on the CD, so I'll assume that you do not have a recovery CD. This is the contact page for the India call them and they should be able to get you set up with the recovery CD.
Thank you
-
I have a Pavillion DV7 with Windows Vista. Im having a lot of problem with my computer and want to just restore to factory settings and wipe it off. How can I do this?
HP - three ways to recover the PC to original operating statusClick on the links below for instructions:To order installation discs:
HP - order of the recovery disc for Windows
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334
-
USB key does not appear in my computer with Windows 7 home Premium
I have an Acer Aspire 7750 running windows 7 Home premium. When I insert a flash into the USB drive, I hear the sound that indicates the flash drive is inserted, but the drive does not appear in the window 'my computer '.
I'm not a novice, but certainly not an expert so please keep the explanation of the basic if possible solution.
Thank you very much for your help!
Hello
Check if the same works in different USB Ports, in Device Manager if there are any unknown devices or try to uninstal and reinstall USB Root hub, that should help you. Let know if you have the same problem. You can also check with all other USB devices if works.
-
D - Link USB Hub DUB - H7 works do not correctly with Windows 8
I am also having the same problems.
Very recently, I went from 7 to 8.1 and with the operation of the steam, the sound of connect/disconnect repeats about every 10 seconds. If I disconnect the D - Link DUB - H7 sound no longer appears.
I could live with it for the time being cut just sounds system, but unfortunately the problems don't stop there.
If I have my USB DAC (sound card) connected via the hub, pilots always crashes in a few minutes in Spotify or any multimedia player. It means that I actually listen to music at all.
Hardware troubleshooting does not detect any problems at all. For now I'll connect my USB DAC separately and cut system sounds, but it is not a solution. Never had any problems with this hub in Windows 7 and I don't really feel like buying another usb hub since it fits my needs perfectly.
Separated from -.
Hello
Answer the next question to learn more on the subject, that you are facing.
What is the brand and model of the computer?
Install the chipset drivers by downloading from the website of the manufacturer of the computer and check the status of the issue.
I also suggest you run the Fixit from the link next and if it helps fix the problem.
Hardware devices do not work or are not detected in Windows,.
http://support.Microsoft.com/mats/hardware_device_problems/
Please let us know if you need assistance.
-
Unsuccessful recovery of desktop HP Pavilion with Windows XP
Hello world
I have an old model of UK 433.la that worked reliably until recently. Following a corruption on the hard drive stopping the loading o/s, I used the HP Windows XP Recovery discs. The option I chose was a reinstallation of Windows XP without reformatting the drive. The copy of the o/s worked OK but when I booted up I get the error "NTDLR is compressed. Press Ctrl + Alt + Delete to restart»
Anyone have any ideas about why this error occurs? (Not sure if connected but some time ago, I ran the compression option for the office hard to increase its capacity).
Al
1. check the Windows Update
2. open C:\Documents & settings. You should see the old user accounts with data inside. The files will have to be moved to correct the profile after the creation of new user accounts. You can then delete the accounts user.old.
For what it's worth, it is usually best to back up the files on CD/DVD or external USB hard drive user and perform the full destructive recovery on problem machines.
-
My new HP Pavilion with windows 7, I bought recently is terribly slow download?
I recently upgraded to Windows 7 and bought a new HP Desktop Pavilion. It's terribly slow download. So slow, the computer falls asleep before the download ends. Windows 7 sucks. Is there a solution?
58elmer wrote: I tried to download "Speed test" yesterday and there never load. My computer would go to sleep before downloaded it. I have "Snipit", but need to learn how to use it. Thanks for the info. Elmer
Hello 58elmer, you could try go to Control Panel Power Options, Information of Performance tools and select it in the top left of the screen, change when the computer sleeps. Put forever.
Then select choose when turn off the display. Indicate what ever.
Then to close these windows, and on the desktop, right-click on the desktop and a menu will appear which shows a screen saver. Click on the screen saver and select None.
All these parameters will keep your locking system and can allow you to run the speed test and also to use the tool captures Windows 7, which can be accessed at the beginning, all programs, accessories, Snipping Tool.
-
How to get 2 usb ports 3 to work on 2215dx hp with windows 7
I just updated my hard drive on the laptop HP 2215dx with a Samsung ssd. I did a clean install of Windows 7 instead of win 8. The only thing that the doesn't work after installing all the disks that I found is the 2 usb ports 3. They produce an error in Device Manager. What driver to install to get these 2 usb ports work under Windows 7?
Thanks for the help.
Hello
What is a G7-2215dx? Please try:
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-102571-1
Kind regards.
-
How can I change the password for BIOS on HP Pavilion with Windows XP?
How to pass the password to the BIOS? The Pavilion my laptop let me use the F keys to access.
You will need to contact HP support.
They will know if there is a way around the existing BIOS password [it may not be a way to do].
They may require proof of ownership before help you.
Denis
-
Can I use a USB DVB - T TV TUNER on my laptop with windows XP?
I just bought the DVB - T USB TV Tuner. When I read the requirement that microsoft windows vista or windows 7.
My lap top is windows XP which means I can't use it to watch TV?If the tv tuner driver is made for Win Vista/Win7 as then you can not install the tv tuner.
-
Please someone help - the speakers on my laptop have stopped working all of a sudden! But the headphones that there is a low hum when I use them.
Once in the control plan to address the problem, he told me that they work.
Please help - laptop is only a few months old!
You'll be my hero.
Hello
Open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select Properties. Click the driver tab and then click on "update driver". Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer. "High definition Audio Device" left click once to highlight, then click the next button to install it.
This makes all the difference?
Kind regards
DP - K
-
My computer is giving problems to install the program "myitlab", it gives me an error code 2356. using windows 7.
Tried the link for help here?
Maybe you are looking for
-
Two of my email address appear to have been joined. When I try to send an e-mail to the address of problem asked me my password but the ID in the SMTP application shows jerrhrt27 when the real address is jerryeg27. No idea how it was changed or where
-
I went into the Terminal to uninstall Java according to the Mac and I can't type my password
I can't type my password in the terminal so I can uninstall Java according to the Mac. It's like my keyboard is dead. I have a Macbook Pro (2011) ElCapitan 10.11.2 version... I don't have any idea what to do.
-
OneKey Rescue is not compatible with Windows 7
Hello Recently, I installed my free upgrade to Windows 7.0. I was invited during installation that the OneKey Rescue 6.0 is not compatible with Windows 7.0. Is there a program I can download and use? Thank you!
-
I'm trying to install Quicktime / itunes, but I still find the icon indicating that there is another ongoing installation. I tried to see what the installation is still ongoing, but have'nt found nothing. Help please..!
-
I have 2 microphones installed, but none do not work
Original title; Problem with microphone Hi I have problems with my microphone. Some how I install both micro and that's why none of them want to work I would like to delete a sound section, but there is none of these options. Disable option doesn't c