HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

Hello

I upgraded Windows 8.1 to Windows 10 yesterday.

Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

Thank you best regards &,.

Umesh

Here are the technical details:

http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

It is HD4400 Intel graphics

Try the Intel driver update utility:

https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

Download drivers HP pages not available right now.

Tags: Notebooks

Similar Questions

  • Get the error message after upgrade to Windows 10: peer certificate has no Secure Connection has an invalid signature.

    Error message trying to connect to Facebook after update to Windows 10: secure connection failed

    An error occurred during a connection to www.facebook.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

       The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
       Please contact the website owners to inform them of this problem.
    

    Hey, if you're an avast user, please disable https scanning software:

    1. Open the Avast dashboard on an affected system.
    2. Select settings in the left side menu.
    3. Adopt a Protection Active.
    4. Click on customize next to the Web Shield.
    5. Uncheck the option "Enable HTTPS analysis", and then click ok.

    http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

  • Now I am unable to get the full screen on the secondary monitor. How to fix?

    Now I am unable to use the full screen on something else than my primary monitor.
    Years, I just clicked full screen on Youtube or anything else, and he would go full screen on the monitor that the program was on.
    What setting changed
    I'm running an AMD ATI 5450 Chipset Graphics Card Runinng 12.6 Software.
    4 GB of RAM Windows 7 Pro 64-bit

    Hello

    1. are you not able to use the full screen on the main or secondary monitor?

    2. what happens when you try to maximize or use mode full screen?

    3 did you changes to the computer before the show?

     

    Method 1: Updated display adapter () AMD ATI 5450) drivers and see if that helps.

    Download here: http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-5000/hd-5450-overview/pages/hd-5450-overview.aspx

    Reference:

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

     

     

     

    Method 2: Restore the computer to a date when it was working fine.

    Reference:

    System Restore: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions  

     

  • Unable to get the maximum screen resolution when you use the external monitor

    Hello

    I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
    How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
    Thank you!
    I use Windows 8 on laptop ASUS K55A.

    So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

    Then,

    https://communities.Intel.com/thread/30360

    (BING search engine for)
    Two monitors specifications Intel HD Graphics 4000

    )

    Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.

  • Unable to get the login screen in the PIA.

    I finished up to the installation of PIA and I used only the available default settings there and this is the link that iam using for signature in "http://localhost:80/ps/signon.html". IAM just get the Message: the network access page cannot be displayed. How to check if my PIA is beautiful and functional. My application server domain is in place. What is the problem with weblogic? Pls help...

    You must start the Web server first...

    F:/PT8.51/webserv/PeopleSoft/bin/startpia.cmd

    Once it works try again.

  • Unable to get the 'splash' screen to work with sample

    Using the RIM as a model example, I have this:

    {public Dib (boolean ribbonClicked)

    {if (ribbonClicked)}
    Launch the application
    this.pushScreen (new SplashScreen (UiApplication.getUiApplication (), new GameScreen()));
    this.pushScreen (new GameScreen());
    } else {}

    and this:

    public class SplashScreen extends full screen {}
    Private fields
    Following private FullScreen;
    application of UiApplication private;
    private Minu = new Timer();
      
    private final static Bitmap _bitmap is Bitmap.getBitmapResource ("berrysoft_logo.png");.
      
    Public SplashScreen (UiApplication ui, following fullscreen) {}
    Super(Field.USE_ALL_HEIGHT |) Field.FIELD_LEFT);
           
    This.application = ui;
    This.Next = next;

    This.Add (new BitmapField (_bitmap));
           
    SplashScreenListener listener = new SplashScreenListener (this);
    this.addKeyListener (listener);

    Timer.Schedule (new CountDown(), 5000);

    application.pushScreen (this);
    }

    but when I click on the application icon on the Ribbon, instead of work (as it does if I just press on GameScreen, it 'freezes' (a few seconds), then does nothing (IE never left the band).)

    What's wrong?

    The SplashScreen sample itself grows in the stack to display within its constructor.  You do not need to push, simply create an instance of it.  Pushing it, you try to push the same screen in the battery twice, which is not allowed.

  • HP Pavilion DV9600US video hangs and get the blue screen of death, hardware video message fails

    If this can help others! I have a HP DV9600US it works well but then screen freezes hot flashes and crashes or re-boots or gives me the blue screen of death. Spent hours updating the drivers and the latest NVIDIA drivers without change, all the tests and diagnosis appear normal. When I open IE 9 it hangs then crashes sometimes at the office, tried to change the parameters of res and nothing has worked. I assumed I had a bad video chip. NOT. This all started I thought with IE 9, I changed all the settings of Internet Explorer.

    Here's what I found to solve the problem and I hope this can help, DO NOT updating auto or manual for the new drivers or NVIDA video Windows CE is the cause, I downloaded from the site to shape the 2008 NVIDIA driver HP and rolled, problem solved. I am running Windows Vista 32 bit.

    I post that hope, it helps others and records the days/hours of attachment and not update recommended to the latest drivers that actually caused the problem in the first place. I guess the lesson learned if it works LEAVE IT ALONE.

    Good luck

    Please mark as resolved so other users can see this theard includes a fix for the problem

  • HP Jet 13: could not get the usable screen after you enter the password when you restart

    After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

    That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

    Please let me how to restore my system or to whom to return it.

    Thank you

    The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

    If the above is not correct the problem, try to run the steps in the link below.

    http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

    Kind regards

    DP - K

  • I get the blue screen after unplugging the USB device

    Hi, I recently got a new laptop and have blue screen problems. I've updated all my drivers with DriverGeniusPro and windows update, but whenever I unplug my mouse for my laptop blue screen USB slot. I also noticed that there were different reasons given on the blue screen. Here are a few that happened today;

    https://SkyDrive.live.com/redir?RESID=80CF765750692818! 113
    https://SkyDrive.live.com/redir?RESID=80CF765750692818! 112
    https://SkyDrive.live.com/redir?RESID=80CF765750692818! 111
    Help me!

    Well, I don't know who it was but I installed SP1 and uninstalled the BlueEye Macro and the problem seems to be fixed! As soon as you mentioned the issue of BlueEye, I was convinced that it was the one you mess with pilot virtual and things to mouse input during the installation. Thank you very much for the help, I appreciate a lot :)

  • HP Pavilion m9500z-how do to replace the hard drive after upgrade Vista to 7

    My hard drive is currently allowed.  If I want to spend my hard drive or if I have a problem I have Windows 7 upgrade disk and the recovery of the computer disks is under Vista.  Is it complicated?  I need to install the old Vista and then upgrade to Windows 7 again?

    Hello

    You have another question?

  • WRt160N is unable to access the configuration screen after the demotion to a lower version

    I just bought WRT160-V2 two weeks ago. The connection kept down all the minutes. After reading some threads in this forum, discovered that I was not alone. A thread under the instructions of a http://audipages.com/router/ site. So I upgraded my router for firmware v2.0.0.02 build 008. The connection is much more flexible. However, Setup screem has not come back. Now, I am not able to access the configuration with 10.10.10.1 screen. Help, please. Thanks in advance!

    After an update of the firmware, you must reset the default router, and then configure the router again from scratch.  If you have not done this since your last update of the firmware, please do it now and see if it solves your problem.  If you have saved a router configuration file, DO NOT use it.

    To reset your router prress the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

    If your Internet Service is cable follow this link

    If your Internet Service is DSL follow this link

  • Can't get to the login screen after upgrade

    Hi team,

    I just finished a redeployment of last August release of 12.2 on an existing version of 12.1 HUB by following the instructions in the guide section upgradepolicy private cloud automation.

    The redeployment process completed without problem informing me that the schema and execution deployments have been all updated.

    Unfortunately now I can not log on the hub, all existing users cause the login screen reload showing no error.

    Note: If the user name or password is incorrect an error is returned.

    Users can connect through OPM without problem.

    I tried to reset the passwords, nothing helps.

    Any help that can be made will be very appreciated.

    See you soon

    Ben

    This sounds like the secure session cookies have been enabled (it is by default) - you use HTTPS?

  • Only get a gray screen after upgrade of El Capitan. What can I do?

    I tried to install an upgrade, but only now have a gray screen.  The installation seems to have stopped half way through.

    Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

    To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

    Step 1

    The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

    a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

    (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

    c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

    d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

    Step 2

    If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

    Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

    The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

    If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

    If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

    If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

    Step 3

    If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

    Step 4

    Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

    Step 5

    If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

    Step 6

    Sometimes, a startup failure can be solved by resetting the NVRAM.

    Step 7

    If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

    Step 8

    Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

    Step 9

    Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

    It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

    Step 10

    If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

    Step 11

    Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

    Step 12

    Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

    Step 13

    This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

    Step 14

    If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

  • Satellite A500 - how to restore the factory settings after upgrading to Windows 7?

    Hello

    Since I have updated my OS to Windows 7, I have a few problems. In general, I noticed my laptop would ' t work as well as it was running Vista 32 bit. Especially with games online (souch as counter strike 1.6).

    The problem is that I have for my backup DVD because my DVD burner work not at all :/ Now I just wonder how could I return for win Vista without the DVD. Is it still possible? I also do not have small jets CD I bought my laptop. So, what should I do?

    null

    Hi stab them.

    I think that I n the new good t for you: restore factory settings without Toshiba recovery disc isn t possible in your case! :(

    First of all I think it's normal to s no recovery disk is delivered with the laptop as you will need to create them yourself using the Toshiba recovery disc creator. That is why it s recommended using high quality as Verbatim DVD-R media.

    I think that the only option to recover to factory settings is to order a new Toshiba recovery disc.
    https://backupmedia.Toshiba.EU/landing.aspx

    I put t understand why you didn't create this disk, because after the first boot, if you shut down the computer area, you get the following message:
    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • Pavilion dv6-7135nr: loss of network connectivity and wireless after upgrade to Windows 10 cable

    After the upgrade to Windows 10, I lose network connectivity after a restart of the computer.

    The operating system fails to load drivers Broadcom 4313 n. The driver date is May 8 202. The reason code is 31 on failure to load the drivers.

    I returned to Windows 7 and migrated to Windows 10 several times with the same result. I tried to upgrade on the Broadcom drivers, but Windows says they are up-to-date.

    I also see that the Realtek PCIe GBE Family Controller is having the same problem.

    I think it's a driver problem, but cannot find the correct set of drivers.

    Any help would be very useful. I have just re-upgrade to Windows 10 and have network connectivity.

    Hi @karbacdb,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-7135nr Entertainment Notebook and problems with connectivity Wireless Windows 10. You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

    Here is a document that shows how update the drivers that do not work correctly with Windows 10.

    Here is a tool of Broadcom for Windows 10 drivers that could help.

    Windows 10 drivers are available through Windows Update. Please be aware that HP does not Windows 10 drivers will be available from Windows Update.

    Please let me know how it goes.

    Thank you.

Maybe you are looking for