HP Pavilion 20 - preparation auto repair

Similar Questions

• Y410P stuck in boot loop 'prepare auto repair.

  Hello

  Unfortunately, I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "prepare auto repair. After a few moments, it will say "Diagnose your PC" and then "repair disk errors. It could take more than an hour to finish. "Edit: then after a few seconds, it restarts and everything happens again.

  As you can imagine I am very satisfied with this and I have no idea what may have caused it. I am currently studying in Belgium so no help here I can get will be greatly appreciated.

  Thanks in advance!

  
  

• BootCamp "preparation-auto-repair" after the triple-boot Linux install.

  Hi everyone and thank you in advance for your help, I'm pretty desperate here...

  I use a retina MacbookPro 13 "with dual-boot OS X el-captain and Win8.1 for years, with also a small third partition"shared file ".

  Today, I needed to install a small partition (ubuntu14), so I decided to take a part of the macOS (26g) of Linux Ubuntu partition.

  Everything went well during the installation process, but now I can only access my OSX. When starting with "command-key" Linux is not appear at all and Win8.1 goes to 'prepare-auto-repair' blue screen without other information.

  I tried to install refit or without success.

  Running diskutil list:

  disk0s2 is my OS X partition

  disk0s3 is my OS X recovery partition

  disk0s4, that's where I think I installed correctly Ubuntu14

  disk0s5 is my shared files Partition (worked between osX and win8.1)

  disk0s6 is my Bootcamp Partition of Win8.1

  

  Running diskutil list of cs:

  

  TPG - vv - r see the/dev/disk0 : running

  

  Running disk/dev/disk0:

  

  Thank you in advance to those who can help me on this.

  All the best,

  Yoln.

  In addition, with regard to this topic: 'not bootable after Ubuntu Installer Bootcamp. "

  I have the exact same blue screen when you try to run Win8.1, but I never see the reclamation / screen, only right boot to OS X, if I don't press any keys.

• preparation auto repair

  When I turn on my computer, a black screen with the windows logo and a white rotating circle comes up and sometimes reading preparation auto repair and other times reading diagnose your pc I turned on and off-disconnected the f8 pressed to battery and let nothing-ive it operate until the battery ran out and let it run for a long time when its plugged in and nothing happens the same screen is still there - I guess this is arrived with a years warranty? who is subject to run off-i have a dv6 that has windows 7, when I bought it and I installed a free update of windows 8 accompanying

  Hello

  (The menu uefi bios) error codes would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• Windows RT out of preparation auto repair screen

  my cell surface was in a loop of "diagnose your pc" and "prepare the AutoFix. It happened almost a year ago so I put it away but wanted to try again today and the same thing is happening.it makes a buzzing sound vibration time and time again. There give both points but except that it leaves me not at all.

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the question on auto repair.

  I will definitely help you with this.

  What Windows RT you use?

  If you use Windows 8.1 RT, I suggest you go through the link below:

  How fix the loop auto repair in point 8.1 Windows (also of works for Windows RT)

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/how-to-fix-the-automatic-repair-loop-in-Windows-81/bfc92bc7-031f-45D4-b623-bcb4847d32fd

  You can use a USB drive to the auto repair

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Pavilion x 360: auto repair loop

  My laptop was working fine. I left home and came back, and now it is stuck in a loop of auto repair. I was looking around a bit online and nothing has worked. I can't enter the mode without failure or BIOS. I don't have a disk hard or in any case to reinstall anything. Don't know what to do.

  Hey @sowens3,

  If you enter the BIOS by pressing F2 key immediately as you power upward? If so go to Diagnostics and test your hard drive.

  If you enter a command prompt test: on the command line, type SFC/SCANNOW Command - System File Checker will open and check the system.

  Thank you.

• NB10t - Preparing A history of installation - auto repair

  Hello

  has got a brand new NB10t-A. It works today and started the installation process. I got to the screen when you select a color theme and enter the name of the device. I haven't that I had to get out. I closed the cover thinking it Hibernate and resume ok later.

  When I got home I turned it on. the color selection screen reappears ok. I selected a color palette and then entered a name. the machine then suspended and unresponsive. I waited a few minutes and held down the power button to stop it.

  When he started, he said something in the sense of "system problems and needs to restart". after reboot, it will now in a loop and says "prepare auto repair. It shows the screen toshiba with 'Prepare auto repair' downstairs, but then the screen turns white for several minutes and it has happened several times now.

  can anyone help?

  Hello

  Try this workaround:
  Disconnect the power adapter and remove the battery.
  Now hold down the power button / stop along 30 sec.
  Then reconnect the battery and the AC adapter.
  Press the power button to power the laptop and press F12.
  Now you should see the boot with bootable devices menu.
  Last option should be HARD drive recovery. Select and start the process of recovery.

  Hope this helps

• PC won't start-preparation of auto repair. After, there is a message: 'automatic repair is unable to repair your PC' and ' Log: C:\windows\System32\Srt\SrtTrail.

  Original title: help! My PC won't start!

  Hi, my computer Windows 8 really does start. On the screen, I see just the windows logo with "prepare auto repair. After, there is a message: 'automatic repair is unable to repair your PC' and ' Log: C:\windows\System32\Srt\SrtTrail.

  I try with everything I can, recovery CD and USB, refresh, auto repair, I can't back up my files because I have not found any extern with 208 GB storage... So I can't really reset my PC without losing my files.

  What can I do to start my PC, without losing my files.

  PLEASE, I BEG YOU! Help me!!! PLEASE, I BEG YOU!

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to start your computer.

  This could occur due to system conflicts.

  Try the steps.

  If the auto repair is unable to repair your PC, select "Advanced options" and then "Troubleshooting."

  1. Select 'Advanced options', then 'command prompt'.
  2. If you are prompted, enter the password for the user name.
  3. At the command prompt, type the following commands, and press ENTER.

  Bootrec /fixMBR
  Bootrec /Fixboot
  Bootrec /rebuildBCD

  Restart the computer and check the issue.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• System does not boot, get the white screen after preparation for auto repair

  Hello

  I have a Toshiba Satellite with Windows 8 and yesterday there were some ongoing update and must restart.  When the computer reboots, it took some time and then I got a blue screen (very quickly) who said something as she encountered a problem and needs to fix (it is really fast and I can't see the whole text).  Then goes and comes back as it is booting (with the toshiba logo) and he says prepare auto repair.  Then it goes to a white screen. I tried to get into the HARD drive recovery (power with F12) and when I select HDD Recovery and confirm Yes, it just goes to a blank screen.  I went into the Setup utility (powering now F2 while) and has chosen default install and who does not either (although it has fixed the problem with my keyboard backlight does not). Support of Toshiba said that it is the operating system, not the hard drive.  But I need a drive recovery media that will scan all.  Anyone know other options?  I have a disc of recovery of a Microsoft coming 8 Pro (dell).  Would it be an option, to use it (I got it on a flash drive) and start-up of that?  Thanks for the help.

  Hi John,.

  Thank you for the update.

  Given that you want to use the Windows 8.1 recovery disk, you won't perhaps able to start Windows 8 using Windows 8.1 because the computer may not be able to find the files of Windows 8 start to recover.

  Yes, you pouvez install 8.1 Windows using the recovery disk. However, you may not be able to perform the upgrade option when installing Windows 8.1. When you click install now and follow the instructions, you must choose the Custom Advanced option to continue installation. Choose Advanced custom options will create a folder in the C: drive (or any other partition when you do not want to install) named the Windows.old folder which expected to have all of your files and documents of previous installation and are accessible.

  Make sure you have the drivers available for the devices installed on the computer as network card, drivers etc. of video card you install Windows 8.1.

  Hope the information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Even after the recovery window 8 is in the preparation of the auto repair loop

  My laptop MSI gs70, he keep remaining preparation auto repair. Only sometimes, I click on F3 will go to the recovery sysytem option, especially going to go prepare the AutoFix. For further troubleshooting, select refresh your pc, it displays the message, windows player is installed is locked. Unlock the drive, and then try again. To reset your pc, it displays unable to reset your computer. A required disk partition is missing. Go to advanced option, each of them do not work.

  Even if sometimes I enable System Recovery successfully, he picked up the system, he enters the office, then you reboot the laptop, it will return preparation auto repair. I have really no idea for it already. Please help me...

  Hi JIT,

  Please answer these questions to better understand the issue.

  1. What is the brand and model of the computer?
  2. Remember to make changes on the computer before the show?
  3. Do you have connected an external device to the computer?

  You may experience this problem if Windows 8 start files are missing or corrupt, try to remove all external devices connected to the computer except keyboard and mouse and see if you can boot to the desktop. I suggest you follow these methods and see if it helps:

  Method 1:

  I suggest you try to do a system restore to an earlier point of time before the problem occurred:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click Advanced options , and then click System Restore.

  (e) follow the on-screen instructions and check if it helps.

  Method 2:

  Auto repair and check. If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

  You can also refer to:

  Create an installation media for Windows

   http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

  (b) select the correct time and type keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select auto repair.

  Method 3:

  I suggest you follow these steps and try to solve the problem of Windows 8 start:

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting , and then select Advanced Options.

  d. click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  e. restart the computer.

  f. check if the problem persists.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• HP Pavilion g4-2235dx Notebook PC stuck on auto repair for a month now... Please help...

  so my laptop HP Pavilion g4-2235dx product number: C3Q50UA has been slain in automatic mode of repair for like a month now... it goes not far than this screen... the day it happened first I booted up & it real quickly flashed a blue screen that says my computer needs to reboot so itll restart itself for me then it rebooted & went to the screen hp for 10-15 minutes , then went to the automatic preparation of repair screen for about 2 hours, then the screen comes to have dark & remained like that all night... the next day I turned off the laptop & started again & it would be on the screen hp for a long time & id farm & turn on again, then he would start, restart itself then go to auto repair. If I stop it on the page of sutomatic repair then it would be just cranking up the hp screen & nothing else but if id shut down on the hp screen & turn it back on go to repair automatic page... back & suite back & rear returns & suite for days... Finally once a week or so, I gave up... i left on the page of auto repair for about 2 days directly plugged in so he would die just in case he might just need more time but 2 days was too long so I finally unplugged it & left on this page until the battery is dead & haven't touched since... Ive read some of the other posts on the loop of auto repair & what to do, but I don't want to lose all my stuff on the laptop as my images/videos(thought i saved them to skydrive but apparently i didn't complete the whole process to access my stuff from another windows 8 device)... I bought the used laptop & the warranty has already expired... any installation of windows 8 flash disk/drive. I have no recovery disk. so I have no way to replace my OS or recover my data that are already on this laptop... is there something I can do to get out of this dealie loop of auto repair without an installation/recovery disk/flash drive?

  You'll need a Windows 8 rescue flashdisk, HP usb recovery media or disk recovery in order to access the safe mode and the Startup Repair. The cost of a recovery of HP USB is not that much to around $ 30.00 USD. You can also ask a friend or relative whose computer has the same BONE to make a recovery of Windows 8 key for you.

  If you want to recover data from the hard disk before performing any repairs more, then you will need to remove the hard drive. You have the choice to start the installation in a usb enclosure, using a usb cable to power\sata or install temporarily to with a sata available on a desktop at home.

• Satellite C50D-B-120 in loop - preparation of the auto repair

  my laptop keeps going into a loop, when I turn it on it says 'Auto repair Preparation' then goes on a screen black for several hours without anything I tried to restore the disk hard taking 0 when turn, but it does exactly the same thing in a black screen. Any help?

  This could be caused by the bug of Windows 10.
  There are many different items on such behavior Windows 10 and probably this kind of issue should be fixed by Microsoft update.

  This is one of the items mentioned:
  http://www.Forbes.com/sites/amitchow...s-reboot-loop/

• Yoga 11 rt stuck on the preparation of the auto repair

  Hi all
  My lenovo yoga 11 is blocked at startup (auto repair preparation) for a day now. I desperately need your help. This tablet is what links me with family and friends at home (abroad in Asia for 7 months and counting). I just he might walk, so if a reset is needed I'm oke with who. But please, explain to me how to perform the steps that I can't find useful information online.

  If someone could help me on this, that would be much appreciated. If more information is needed please ask and ill do my best to accommodate it! Thanks in advance to all, Tom

  Try the button nova its next to the power button its very small and if that has a repair option I, it is also the place to do a complete reset

• Spectrum of HP x 360-13-4009na: Machine starts with "Preparation of auto repair. Cannot reset. "The disk is locked.

  One day the machine started start mode "Preparation of auto repair. I tried to reboot several times, including a hard reset without effect.

  Then I tried to "put this PC" but I get the message "the drive where Windows is installed is locked." Once, he did pass this screen and asked me my credentials for the Windows account but then failed. Now it's to the same message.

  I then tried of the system hard disk diagnostics. The DST short and SMART test passed BUT the long DST has failed with an error code ridiculously long...

  0LPMB9-7LT88D-MFPWMG-61V503

  My conclusion is that this problem is hard disk (SSD) related, but what I can do now.  Needless to say my warranty missed in January 2015 (I think) and the machine is currently blocked.

  Does anyone know what the code above means?

  If it's a SSD failure, how can I get it replaced and then how do I reinstall Windows 10 since HP did not provide support for recovery with the machine, either 8.1 win or win 10.

  Any help appreciated.

  Paul.

  Your long test failed.  I wouldn't replace the drive if I felt it unnecessary.

  You'd better replace but weather that you do it yourself or not, I can't comment. HP has no instructions for your model on the replacement of this player.

  If your comfortable with DIY, go ahead as long as its out of warranty.

  Specs say it has a 256 GB SSD M.2

  Personally, I would like to look at the disc before I ordered one, to make sure that I get the correct type.

  Good luck.

• Urgent - Windows RT Surface is in preparation for loop of auto repair

  Team MS Hello,

  I have been using my Windows 8 RT Surfact Tablet for a few days. I don't know what went wrong, my Tablet Surface is not able to connect.
  Rebooted/Reset/refresh all operations starts with 'Auto repair Preparation' and fails with the error message with below "Shut down" and "Advanced Options":
  Auto repair couldn't fix your PC
  Press 'Advanced Options' to try other options to repair your PC or "Shut down" to turn off your PC.
  Log file: C:\windows\System32\LogFiles\Srt\SrtTrail.txt

  But could not find any file of that type in the c:\windows\system32\logfiles folder. Not even the record 'Srt' are available.
  On automatic selection of Advanced repair options-->--> advanced troubleshooting, tablet will show "Diagnose your PC" with spinning points, then displays the same error message.

  Also, tried all the options that are available in advanced option, except, "use a USB network connection device or Windows recovery DVD", as I do not have Windows Recovery DVD with me.

  I am badly stuck with my work, please help me solve this problem.

  Thank you
  -Iqbal

  Hello

  Thanks for posting your query on the Microsoft Community.

  It is normal for the Chargers for devices such as the Surface to be warm to the touch. It is not normal for them to also get very hot though. If it's hot, I consider that it is defective and a possible fire hazard and would communicate with the support of Microsoft Surface to have it replaced. Please see:

  http://www.microsoft.com/surface/support/contact-us/.

  I suggest you check out the link below

  Windows stops responding on the Surface RT or Surface 2

  http://www.Microsoft.com/surface/en-us/support/warranty-service-and-recovery/Windows-stops-responding

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.