HP Pavilion 23-b010 BIOS updated

Similar Questions

• Pavilion 15-p246sa: BIOS update successful but cannot now access the BIOS screen

  The recommendation in HP Support Assistant I've just updated BIOS version f33, f34.  This succeeded and the Pavilion starts normally.

  However when I try pressing ESC at startup key is ignored and the trunk.

  How to reactivate the computer to respond to the ESC key and allow me to access the system configuration utility?  Have I somehow corrupt CMOS data?

  SOLVED!  I discovered the site of download drivers HP there is more BIOS updates for my Pavilion, the last being F.42.  So I installed this.

  At that time, it was possible to get the system configuration utility by pressing the ESC key.  However, it works a cold power upward, not reboot.

  Also the window by pressing the key is very short, some say about one-fifth of a second, and if you press two times you do not see the system configuration at all.  If some patience is required.

• Pavilion G6 - 1061ee BIOS update error causing the extreme fan noise

  Hello

  It been a while since that HP has completed a new update of the BIOS for my Pavilion G6-1061ee, I got v f.63.

  But now, they have made a new update of BIOS that is v f.65 I downloaded the file (the insydeFlash BIOS update) and when I run it and press START, my system freeze suddenly and EXTREMELY increase fan noise, it's like my CPU usage is 300% then in a few moments, the system shuts down and I could not be able to turn on the computer again , So I had to unplug the AC adapter and remove the battery then return everything back to be able to turn it on.

  So can anyone help me with this problem.

  OS: 8 64-bit Windows

  RAM: 8 GB (Original was 4 GB... And added another 4 GB)

  CPU: Intel (r) Core i5 CPU M480

  GPU: Radeon HD 6470 M with Intel HD 3400 grapchics

  - And thank you

  Kind regards
  Pedro Marthon

  Hello PedroMarthon.

  Are you currently overclocking the graphics card?

  In order to solve this problem, I think you should uninstall third-party drivers and use the official drivers for Windows 7 and the workaround posted by my peers.  The reason I suggest, is that the use of third-party drivers could cause strange problems and it will be easier to solve the problem.

  What I would say is remove the third-party drivers and then using the method posted in my response above.  Once the process is complete, I would try and then update the BIOS again.  If successful, you can remove Windows 7 drivers and again use your third-party drivers.  However, I'm not against the use of third-party drivers.

  I appreciated the way in which you have been given to work with me, so I went to come your messages of congratulations.  If you think that I was helpful please click the White Star under my name to give my messages of congratulations.  I would really appreciate it!

  I will keep an eye out for your next answer.  I wish you a nice day!

• Pavilion 500-164: bios update - no option to update

  Fan CPU and PC failure would not start unless the message "Fan failure. Fan has been replaced, but now always make mistake on blue screen BSOD, which reads "WHEA_UNCORRECTABLE_ERROR" and sometimes other errors. Windows tries to start in recovery but BSOD over and over again.

  What I tried:

  (1) reset BIOS default. DONE - behavior even after resetting to BIOS defaults.

  (2) I tried booting from USB drives (several) using the tools of recovery of Linux (Ubuntu Live, Kaspersky, etc.). KERNEL PANIC, etc..

  (3) downloaded BIOS update HP and created update BIOS USB. Restarted with USB (I turned off safe boot, etc. to allow booting USB.) - NOTHING. I tried the two BIOS to run untouched and by going into the BIOS options (by pressing ESC @ boot upward) - none of the options anywhere to read/set the BIOS updated.

  According to a doc Support HP, I tried updating the BIOS of w / in "HP PC Hardware Diagnostics UEFI. The version on this PC is 5.2.2.0 version: I see no option to update UEFI (Flash BIOS). Options like suites: information system, system, testing of components, Test Logs, language Tests, exit.

  What I'm trying next, please?

  BIOS: JA2 v80.35

  CPU: AMD A8-6500

  RAM: 8 GB memory DDR3, DIMM single into the Groove 4.

  NOTE: The system came w / RAM into the Groove 4. Only POST is it RAM DIMM in the location #1. Is this normal?

  Thanks for nothing, Support HP...

• Pavilion a6010n frozen BIOS update

  I was updating a Pavilion a6010n computer.

  I ran the update of the BIOS (v.5.13 to v.5.23) file. Open attention box does not turn off the computer, etc..

  The update froze.

  After an hour, I left pending. I shut down the computer manually. Removed the battery of the BIOS for half a minute.

  I reinstalled the battery and plugged to the computer. Of course it won't start. Does not start even to start.

  Is there a recovery process, that we can use to get back on this computer? Perhaps a BIOS file, we can put it on a drive Flash or something?

  HP says they no longer support this machine.

  Help!

  JakeKay, welcome to the forum.

  Because your computer is more than 8 years old, it was built before that some of the new BIOS recovery methods have been developed.  Therefore, I don't think there is anything you can do.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Necessary for Pavilion DV7t-7000 BIOS update support MRC 1.5.0.0 (external monitor flicker problem)

  I just bought an edition four HP PAVILION DV7-7000 with the graphics of 650 m hd4000/nvidia intel

  combination. I'm running Windows 7 x 64 with 16 GB of RAM of the system.

  I had some serious screen from flicker of my external monitor from the day I bought the laptop. I did some testing and found that the problem occurred while the screen resolution to 1920 x 1200 x 32. Any lower resolution or bit depth could reduce or eliminate the problem of flicker.

  I did some research on the web and found this:

  ------------------

  107 re: 4000 Intel HD Graphics (i7 - 3770 K) sometimes flicker

  Robert_U 25 Sep 2012 09:34 (in response to Frojo)
  Hi all

  This problem is a BIOS problem more precisely with the memory reference Code (MRC) version 1.4.0.0 or more. Contact the manufacturer of your system or the card mother for an update system for your system BIOS or the motherboard that includes the MRC 1.5.0.0 or newer.
  If you have a system with 2 or more memory modules and are comfortable with the removal of all but one of them so that your memory is in single channel mode, try and remove all but one of them and the problem will disappear. This can be used as a workaround until you are able to update your BIOS from the manufacturer of your system or motherboard that includes the MRC 1.5.0.0 or newer.
  -------------------------

  Is this thread by forum on the website of intel:
  http://communities.Intel.com/thread/30096?start=105&TSTART=0

  I think that's the question that I am experiencing. I checked it by deleting memory modules and solve the problem itself.

  Does anyone know where we can expect an update of the bios? I really want to reinstall my second memory stick and retrieve my additional 8 GB.

  You have the original sticks that came with your laptop?

• Pavilion p6717c: p6717c bios update

  Hello

  I have worked to set up a simple raid 1 (mirroring) array on this system. The hard drive failed and had to be retrieved from an OEM CD (it worked). I finally got AHCI enabled and works. Trying to get this working, I loaded the firmware/BIOS for H-RS880-ΜATX and should have charged N-Alvorix-RS880.

  Now, when I try to load N-Alvorix-RS880 bios, it always fails with a return code of 252. How Flash the correct BIOS down now that I made this mistake?

  Thank you!

  @USMC-Tanker, welcome to the forum.

  You actually flash updated the correct BIOS.  This is the page for Specifications of the motherboard of the computer.  The Mobo is H-RS880-ΜATX.  It would not have flashed if it was inaccurate.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP pavilion 500-297C: hp pavilion 500-297c bios update

  HP support system indicates that I have an important update "HP consumer desktop PCBIOS (family ROM SSID 2AF7) this package provides an update of BIOS of HP consumer (2AF7 ROMA family) desktop PC for the supported models running a supported operating system.

  "SoftPaq number: SP7148 Version: 80.20Ap1 size: 10,74 MB download and install selected updates.

  When I hit download and install, it shows that it install and then it restarts. But when he comes back, in the HP Support Assistant distillers of shows, it must be downloaded and installed.

  Thanks for all you tips, finely, I got in touch with HP and the technical advisor advised me not to use the new update.  There is no role on windows 8.1 and it could cause my system to not work properely.  They then said, is there anything else we can do to help you?  My answer was yes ' Please don't sent me updates that I can't use.

  again for all your advice.

• G6-2235us c2n50ua #aba Pavilion: Pavilion g6-2235us bios update failed - error msg at startup

  I had hard time to upgrade to 8.1 Windows, so I made an update of the bios, as recommended by the HP Web Site, but it failed, and now the laptop will not boot.  It displays the error message "your computer must be repaired: \bcd, 0xc0000034... error code. "Additional info are available by pressing ESC, and I can't get into a black screen with options:

  F1 system information

  the F2 System Diagnostics

  F9 boot device options

  configuration of the BIOS F10

  F11 system recovery

  I've been to the bottom of all of these tracks, with no luck on continue.  F10 shows me all the bios configuration screens and the version of the bios is F29, the version I tried to level to.

  I tried to remove the big battery and pressing the start for a minute button - no joy.

  I tried now Windows + B + start - no joy

  I guess I'm trying to create a USB key with the BIOS on this subject, and this is where I am confused.  The softpaq BIOS for this machine is sp66880.exe.  I've got that on an USB fat32 with the label of volume HP_Tools, and I've got HP tools on the stick too.  When I try to boot with the stick of pressing windows + b + start, the light on the USB flashes a lot, but in the end I get the message "the system bios recovery has failed. Could not open the bios image file.  I have a feeling that I don't have the correct configuration on this USB key.  I tried to run sp66880.exe on another computer, but he said that he will immediately Flash the bios, I really want to do (on my Toshiba laptop!).

  I would be very happy any help you all can give me on how to create USB recovery key in the proper format.  Thanks in advance.

  Fixed!

  It turns out that the update of the bios is really successful, but something in the hard disk boot files has been corrupted.  I got a USB key recovery Windows 8 on another machine and finagle around having HP laptop reformat the hard disk to the original factory State.  Fortunately, I made a very recent Macrium image until this most recent problem, so the next step is to restore this image.  With the new c F29 bios, I hope that this beast will finally go to Windows 8.1.

• pavilion dv6 7031tx BIOS update

  I have a Pavilion DV6-7031TX laptop and I would like to add the latest version of the BIOS that I install windows 7 or 8 as UEFI. The bios that is currently on the laptop is dated 2013 and its number is F29. When I go to the support page, I get a listing for the f.0Une of the 2012 Version. When I check the windows list 8 it is a BIOS date of 2014 F.2D number.
  The BIOS located on the laptop is nowhere located? This machine is less than 12 months and it seems odd that this would have a version of BIOS HP does not list?

  I DID using the phone number and talked to someone who had NO IDEA what I was talking about and all I want is a simple answer, I do use install the BIOS listed for windows 8? (don't understand why HP has it filed under win8 just like win7 can also use UEFI environment).

  I hope that someone at HP knows the information I'm looking for?

  Hello

  It certainly isn't the first time I saw a laptop comes with a version of bios that will never appear as a download option - I do not work for HP, so I can't give you an explanation for this.

  Regarding the latest version of the bios of your laptop, F.2D, the cva file lists Windows 7 and Windows 8, which is what I expected.

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.CVA

  Kind regards

  DP - K

• HP Pavilion Slimline s5220y: BIOS update Question

  
  

  Jwoolington

  Hello;

  Let me welcome you on the HP forums!

  I came across this same problem a month ago on desktop HP Elite my son - and after having checked ALL fans on the PC (this message applies specifically to the CASE fan), I assumed that none of the fans did not exist.

  So, I set out to look for how to DISABLE the message.

  Here's what I found (it worked for me): How to fix the error of F2 system on some HP computers-fan - Retrohelix.com

  Good luck

• HP Pavilion 15-e017tx - button Wireless does not work after bios update

  Hello

  I have the HP Pavilion 15-e017tx for the past 8 months.

  Press f12 to this machine is shared by the key wireless button, which was working fine until there was a BIOS update last week.

  Now I try to turn off the wireless using this button it will not respond (light orange).

  I checked the Device Manager, there seems to be a problem with the driver.

  IF you have knowledge of this problem please let me know.

  Thank you

  Hello:

  The update of the BIOS should affect the driver wireless button.

  I would recommend that you reinstall as the unknown device is probably the one.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 5389906 & sw_lang =

• The HP Pavilion a6560z bios update

  I have a HP Pavilion a6560z. Product #: KZ851AV

  I tried to upgrade the processor of double base installed to a phenom x 4 9550, that my research shows is compatible as long as I have updated the bios. I am currently running bios version 5.14 20/06/2008. My problem is the OS original on this PC is Vista, I erased this OS and now run Win 7. I found an update of bios, version 5.49 but she said do not be there except if Vista is installed. Will install this bios brick Council since its desingned for vista?

  I can't enter the bios with the 9550 installed but it does not start in windows. The bios shows that it is a blah blah Phenom quad core, so at least he acknowledges that, but when I try to load windows it says "the file is maybe damaged. The file header checksum does not match the checksum calculated. "I read that had a memory problem and tried 8 different sticks, all with the same result, so I thought it was a bios problem. Anyway, any help on a version of bios, I can try without bricking advice would be greatly appreciated. Even if its for Vista that I am always willing to try. This pc is not much of value. Thank you.

  You are welcome.

  oldhppos wrote:
  

  Thanks for the quick response. Last question, if I could somehow reinstall Vista (system recovery is not an option) and then perform the bios update I was able to install windows 7 and then continue with the new (er) cpu?

  I checked the page download software & driver of the computer for an update of the BIOS for Vista and Vista 64-bit.  It seems not to be available.  You cannot use a retail BIOS update.  Where did you find a BIOS update?

• Pavilion x 2 10-n155sa: bios update does not install

  HP Support Assistant on a new Pavilion x 2 detachable (10-n155sa) said that the needs of the (Doritos 2.0) bios updated. He is currently F04 and offered new is F06.

  I accept the option of automatic update and it downloads etc and to sit down again 'installation' for too long. The PC is not suspended and the update can be cancelled OK, to keep the laptop on F04. It seems not really 'out' at all and immediately cancels the installation (I expected to take a long time to regularize).

  The laptop is running. I tried several times now and just on the installation screen.

  Someone at - it ideas? Is there a problem with this update? Any alternative to the automated mechanism?

  Thank you

  KB10

  Hello KB10,.

  You try to update the bios through the HP Support assistant or you download the file directly on the site of HP?

  IF not, I'll try later.

  Here's the direct link... SP73945.exe

  But in all reality, If it's not broken don't fix it. IF you don't have problems with the bios, then do not update!

  BIOS update are a different animal than updating a driver. If something goes wrong, you have enabled your system in a brick.

  And the HP Support assistant says you need to update the bios is not because its necessary. Don't do that if its absolutely need.

  But good luck anyway.

• HP Pavilion Media Center t3630: update the motherboard BIOS P5LP - THE visa of 6 GB of RAM / 3.5 GB usable (Windows 7 64-bit)

  Hello
  
  I added 3 GB of Ram and installed Window 7 Ultimate 64 bit on HP Pavilion Media Center t3630.it, I can't use all the RAM that I added. (Visa of 6 GB / 3.5 GB usable)
  
  The HP website is only a bios updated for XP and Vista.
  
  This forum has recommended to make a partition with XP or Vista (doesn't install system) what can I do?

  The motherboard is designed to work with four modules of 1 GB. It does not anymore.