HP Pavilion 23 t AIO PC does not have Battlefield smoothly
My father bought me the Pavilion 23 t AIO, thinking it would be a computer game, but on me test my Battlefield 3 game with the normal graphics and settings and the game was incredibly laggy. I changed the settings to the lowest, the game will not always run completely smoothly, and twice he wound himself up on me. I wonder if I need a new graphics card or not, please answer quickly!
SniperProffesor, welcome to the forum.
The good news is you have very nice computer. The bad news is, it is not good for the games. The video card slot is MXM (slot a PCI Express MXM, which takes care of a PCI Express x 16 graphics card (generation 2 speed).) Here are the plug on this topic:
Tags: HP Desktops
installation of the graphics driver for windows 8.1 64 bits in my laptop (i3 processor) been error in this system does not have the minimum requirements
Your laptop is not supported by HP for W8.1.
See if the driver W7 support page for your laptop works.
Install manually if auto installation does not work.
This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.
File name: SP52195.exe
I bought this recovery disk awhile back and it never worked to find the computer. You can here the disc is spinning inside but nothing apears on the screen. I did a hard drive test and everything came back by the way. I tried to enter my UEFI firmware settings to reset the BIOS, but I click on the option each time it gives me just a blue screen with the 0xc000000f erorr code so I can't even their.
So it seems that the recovery partition is corrupt and the recovery disc you, where ever you got was defective or not bootable data.
You will need to order HP recovery discs, if they are available.
If you live in the USA/Canada, call this number... 1-800-334-5144.
If you do not live in the USA/Canada, call the support number HP business PC for the country where you live.
Alternatively, you can download and create an ISO of 8.1 to Windows Installer. But there is no HP software however.
I had a working system, until I installed Fedora on it...
I have since removed Fedora, but cannot get the windows partition to start for the life of me.
In the bios, I don't see "Microsoft boot manager" in the list of Sources of boot UEFI in the boot order.
I have the original, untouched windows 7 x 64 partition, the HP recovery partition and 10 windows partition, I recently did a clean install, but still no start.
I've deleted and recreated a 100 MB EFI partiton and a partion of 128 MB msr by using diskpart.
formatted fat32 EFI, left the msr as-is.
C:\Windows\Boot\EFI\ files on the EFI partition in \EFI\Windows\Boot
Creates the via bcdedit boot manager entries.
- Bootrec /fixboot
- Bootrec /fixmbr
- Bootrec /rebuildbcd
I also used boot bcd with uefi function to copy the files on
I used an installation disc USB win10 to the foregoing as a win7 disc does not have the USB drivers for the keyboard and the mouse.
Am I missing something for the HP Pavilion?
Thanks in advance
Repair of windows did nothing.
I created a ultimatebootcd USB drive (http://www.ultimatebootcd.com/) and used parted Magic/clonezilla in order to image the old windows and partitions of hp recovery (not the entire disk) to a USB external HDD (plugged into USB 2.0 port)
Then I deleted all partitions with parted magc.
Install win 7 on the system with no partitions, it's easier to reduce windows on partition of 100 MB, but you can adjust it later, also don't you bother with the product key, ignore her.
Restart the ultimate boot CD, choose parted Magic then Partition editor and create an important partition for windows = or superior to what it was when he was photographed. If your new installation of win 7 took the entire disk, simply to reduce the size of the partition and create the large partition to restore to, don't forget the restoration of 15 GB HP as well. If you don't see all the partitions or get an error in the score editor, see this link: http://ubuntuforums.org/showthread.php?t=1619381
don't worry about formatting new partitions.
To restore, you will need to rename the image files on the external hard disk created in the second paragraph above. The partition names will be changed, see this link: http://drbl.org/faq/fine-print.php?path=./2_System/102_restore_image_to_different_partition.faq#102_restore_image_to_different_partition.faq
After the restoration, start windows installation disk and repair, it will be your old windows partition, restored. Save and reboot the old partition. If everything is successful, you can delete the newly installed partition win 7 and use msconfig in windows to delete startup entries. You can use parted magic to cultivate the restored partition, if you wish.
Then, install windows 10 to get a true EFI boot.
My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.
Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.
Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.
Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?
Thank you very much for the research.
If the above is successful, then re - install the map graphic and clear the CMOS.
Another thing to try:
A good cable video know.
A known good monitor.
Original title: undetected sd eject not
I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?
From my understanding, most laptops allow you to simply remove the SD card back. Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.
HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter
The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).
(1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.
(2) I tried to change the power adapter too.
The problem is that it is.
Your advice is very much appreciated.
Thank you best regards &,.
Welcome and thanks for posting your question on the Forum of Support HP
It seems that you are not able to turn on the laptop and tried to solve the problem
Please perform steps listed to find out if it is a hardware or software problem below:
1. remove all cables and devices, disconnect them and try to turn on the device
2. check the LED light situation and ensure the action of the spring button / stop is normal
3 Exchange with a well known power cord and the AC adapter
4 Pack no adapters are available, check if the power adaptor is slightly warm
Note: This will give us an indication that the power adapter could be good
5. do you know if the laptop was in battery or power adapter when you used the last time
Note: Make sure that there is no spill of liquid or cutting
6. check if the Port of the AC adaptor is loose/broken
Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit
Hope this helps for other queries to answer the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
K N R K
I work on behalf of HP
I close the laptop and then when I want to open it again the power button works and the system seems to be booting the system. However, when the HP sign disappears the screen becomes black although I can still hear the fan operation. It does not have the beginning, until I press the power button twice. Once to get the start screen flashes and then after the second time the system fills his departure upward and I see the logo of password.
The boot process will not end until I have go through this rigmarole and rest on a black screen with the fan working away in the background, no matter how long I leave it.
Anyone know what could be the problem?
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion 11 x 360 Notebook and problems with the power button works correctly. and the brightness does not properly. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button.
Figure: 13 choose what the power buttons.
You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 8. Please restart the laptop twice to make sure that all updates are completed!
Please let me know how it goes.
You can say thanks for trying to help, by clicking on the Thumbs Up below! .
Original title: Sony Hanycam HC20
I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who
using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.
I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like
as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please
There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.
downgraded win8 to win7prof. USB 3 notworking despite downloading the drivers from the hp site
HP does not have the correct drivers USB 3 listed. Your model has the USB3 amd drivers.
Install the two of them, reboot and you should be good to go...
http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=6943836 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_139250_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=6943836 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
Series of Microsoft Windows XP Home Edition 2002 SP3I lost power when a transformer blew on my street. I'm short Windows XP Home Edition Series 2002 Microsoft. I DO NOT have the original version that has been installed on my computer when I bought the PC.
However, I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.
Here is the information I have:
PLEASE TELL ME WHAT TO DO!
E-mail address is removed from the privacy *.
I can provide as much information it takes to get active Windows.Windows version: Microsoft Windows XP Home Edition Series 2002 Service Pack 2 installed
System has been upgraded to Service Pack 3
Name of the system: D845EPI_ Processor name: Intel (r) Celeron (r) CPU 2 .80GHz The name of the BIOS: BIOS Date: 26/09/03 15:01:32 worm: 08.00.08 Adapter name: NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation) Installed memory: 2.00 GB Default printer: Dell AIO Printer A92
Internet browser: Mozilla FireFox 9.0.1 (x 86 en - us)
2012 software-AVG current anti-virus & AVG PC Tune Up 2011
I have Microsoft XP Home Edition with only SP3 Bootable CD
I have a backup disk with my current data
Name of the operating system Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
Name of system DELL-7089676EEE
The system - INTEL_ manufacturer
System model D845EPI_
System Type X 86-based PC
Processor x 86 family 15 model 2 Stepping 9 GenuineIntel ~ 2799 Mhz
BIOS Version/Date Intel Corp., VA84510A.86A.0023.P08.0309261501, 26/09/2003
SMBIOS Version 2.3
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
DELL-7089676EEE\DELL user name
Time zone Eastern Standard Time
Total physical memory 048,00 MB 2
1.43 GB available physical memory
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 3.85 GB
Paging file C:\pagefile.sys
Name NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
PCI\VEN_10DE & DEV_0110 & SUBSYS_00000000 & REV_B2\4 PNP device ID & 9BAF86 & 0 & 0008
Adapter Type GeForce2 MX/MX 400, NVIDIA compatible
Adapter Description NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
Adapter RAM 64.00 MB (67,108,864 bytes)
Installed Drivers nv4_disp.dll
22.214.171.12473 driver version
File INF nv4_disp.inf (section lvl4)
Color plans 1
4294967296 colors Table entries
Resolution 1024 x 768 x 60 hertz
0xFD000000-0xFDFFFFFF memory address
0xE8000000-0xEFFFFFFF memory address
IRQ channel, IRQ 16
Port of e/s-0x000003B0-0x000003BB
Port of e/s-0x000003C0-0x000003DF
Pilot c:\windows\system32\drivers\nv4_mini.sys (126.96.36.19973, 1.81 MB (1 897 408 bytes), 30/11/2011-11:11)
Please change your key of product before it is stolen! -also delete your personal information
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
-* in your own thread *, please
Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
OS - Windows 7 Professional 64 bit
Browser - Firefox Developer Edition
Java - SE Runtime Environment build 1.8.0_51 - b16
Browser - C:\Program Files\Firefox Developer Edition
Java - C:\Program Files\Java\jre1.8.0_51
Description of the problem:
My operating system, browser, and Java version are all of the nature of 64-bit and properly installed, however, Firefox does not have a Java plugin in the Add-ons Manager and I can't run Java on all Web sites. When I check Java on their website, it tells me that Java is disabled or not installed, but Java is enabled in the Java Control Panel.
Hi mrflom, that's to be expected - the 64-bit versions are delivered with support plugin limited for the moment (single flash is in the whitelist). If you rely on the other npapi plugins please continue to regularly use 32-bit builds.
Button, button "home" to move forward, back, bookmark this page button, show your bookmarks and open menu buttons are present, but you can not see them. Button menu to open does not have a menu drop-down.
Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
More information on the resettlement of Firefox can be found here.
WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!
Please report back to see if this helped you!
At the opening of the library of photos, each photo turn the black thumbnail and so that to open it. Preview also does not have photos properly. I tried to repair the library and this did not help. Help, please!
At the opening of the library of photos, each photo turn the black thumbnail and so that to open it. Preview also does not have photos properly. I tried to repair the library and this did not help. Could this be a problem with the RAM? Help, please!
Check, if pictures can access the original files of your pictures, or if the originals are missing.
You can test to try to edit a photo or trying to export it with "file > export > export original file..."
Photos can be edited or exported?
Shooting Raw or JPEG? Where your photo library is stored? On an external disk or in your pictures folder?
Why my iPhone 4 does not have my last backup? My 6 has been stolen so I try everything set up on my old iPhone 4. When I tried to restore from iCloud not found my last backup. I backed up my phone stolen defiantly
The backup of the iPhone 6 is not compatible with the iPhone 4. Just a guess.
Maybe you are looking for
Hello Did someone had a problem with the Netflix app after that last TVOS updated? I'm running a 4th gen Apple TV A1625 on TVOS 9.2.2 (32 GB) (13Y825). So basically since this last update, Netflix has been blocked after a few seconds after opening. S
Please, I beg you. ! I need for apple store in Thailand คนไทยทุกคนที่ใช้ ผลิตภัณฑ์ ของ แอปเปิ้ล ต้องการให้ Apple Store มาเปิดที่สุดเลยครับ
I'm having a problem where my program will draw well, but only after I try to build approximately 4 times with build errors. An example of a mistake that I often get is: LabVIEW: File generic i/o error. Someone at - it a similar problem where it w
I'm having the same problem as others, i.e. a previous update failed during installation (power failure) and now Vista SP2 install it, complain about 80070490. Running sfc/scannow says I have 6 CBS MUM missing kb905866. Recommendation found Googling
Hello, I use Outlook 2003 with Windows 8, and I can't seem to get the "New mail" icon appears on the taskbar. I made sure 'show the envelope' is selected in the advanced e-mail settings in Outlook. I also made sure to specify "Display Notifications