HP Pavilion 500-199: is there a reason to change the power supply?

Similar Questions

• Pavilion 550 010il: I wan to change my power supply

  I have a HP Pavilion 550 010il

  In the page on record there are many improvements for her so I wan to increase ram cpu and I wan to add a 960 Gtx

  one add an SSD...

  And especially I neede to upgrade the PSU and I want to can it upgrade

  an ATX one which is a corsair 650w.

  And in the Specs page, it is mentioned as Μatx APFC power supply 300 W internal

  While I can change the power supply, if so please suggest a higher 400W

  Please help me with this

  The PSU from Corsair 650W come in many different models.  The maximum depth in your case may not exceed 5.5 as shown in the example below.   Look at chart below and the powers of CPU.  A 600W is still in the plug.

  

  The GTX960 requires 120W and two PCIE 6pin power connectors

  Present the processor:

  Intel Core i5-4460 (Haswell) 3.4 GHz Quad Core

• Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Is there a reason to save the two versions?  The NAVE seems to have no further use other than too much hard drive space.

  Is there a reason to save the original NEF files after import for the LR in the form of files 'convert to DNG?  Why save versions when the DNG is the original and the NAVE seems to just take remote hard drive space?

  I see no reason to keep them, they take a lot of space, one of the reasons to convert to DNG is that they are almost 20% smaller than the ships.

  But it is of course your choice...

• Is there a way to change the default options when receiving the Images on parachuting on a mac?

  Is there a way to change the default options when png or JPEG received on a mac? I can choose between backup to the downloads folder, or open photos. I would like to open in preview instead. Any ideas?

  Problem solved. No apparent reason, the two choices (save downloads and open in photos) presented disappeared and now I have the only option I get is to open the image in preview. No idea how this happened, but my problem is solved.

• Replacing the power supply on a HP Pavilion P6000

  Outputs video (DVI and VGA) were both released on my motherboard. Rather than go through the hassle of dealing with Microsoft if I had to replace the MB, I decided to install a MSI Geforce 210 graphics card and the existing PCI express slot. However, the existing power is rated at 250 watts and the new video card got a minimum rating of 300 watts. It seems to work, and I don't do any high-end graphics or game. My main uses of the PC are paying bill online, e-mail and a few online forums. Should I replace the power supply with a higher nominal? I have a Hiper Type R PSU which is estimated at 580 watts and was planning to replace it with the 250, but it looks like not her suits because it is deeper than the power installed about half an inch. The deeper power looks like it should stick on a half inch at the rear of the computer when it is against the stop before power in the case. I would like to have some advice on the use of the existing offer or be able to use my power Hiper 580.

  The HP Pavilion P6617C model, which is the number of product BT427AAR developed a standard ATX size power supply. Dimensions (as you know) are 5.9 "x 3.4" on the back and depth 5.5"in the case. The small metal latch/stop button to slide the power supply existing forwards (for removal). There really is no support.

  4 rear mounting screws fix the power supply of the Cabinet. Of concern would be the length, an added 0.7 ", as well as cables/connectors.  You can try the Hiper in the case, and if it fits, OK. Otherwise, I suggest a diet that actually matches the Rosewill 630W

• The upgrade of the power supply for HP Pavilion M7570N

  The reason I'm on this forum is when I called hp support and gave me a stupid answer of not being able to change the PSU because of software...

  Well well, the reason why I'm spending power supply is because I bought a new video card and he needs about 500watts and my current power supply is 300watts and I was wondering if I can change it. The video card I bought requires also [2] PCI-E 6-pin

  Video card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150325

  Current PSU: HP manufacturer: 5188-2625

  New power supply: http://www.newegg.com/Product/Product.aspx?Item=N82E16817159085

  I don't know if the size can fit the case m7570n (the slot of the psu) and I don't know if she has enough connectors for everything that is inside the computer

  * Note * I have not changed the computer, I haven't added or whatever it is taken so the connectors, there will be the same amount connected

  Message edited by TheNoob on 2009-02-02 19:01

  It's a high-end desktop PC.  No doubt he will come with an ATX PSU with 5VDC, 12VDC and 3.3Vdc output rails.  I'm not familiar with the Interior of your PC, so I'll give you two General configurations of PSU layout.

  1. design intermediary such as PC Power & Cooling with one or two 80 mm fans to expel air through the PSU.

  http://www.Newegg.com/product/product.aspx?item=N82E16817341011

  2 down-draft design as Cosair 450VX with a 120 mm or more huge blowing fan case in the heat sink and the motherboard of the PSU.

  http://www.Newegg.com/product/product.aspx?item=N82E16817139003

  If the power supply is at the top, back or side of the PC, then a power supply down-project will do a better job to remove heat from the PC.  If the power supply is in the middle of the PC, then go with an intermediate design.  This design will generate more noise at higher load, since the smallest fan should turn more quickly to transport the same amount of air in a 150 mm or 120 mm fan.

  Looking for a nominal 80% efficiency POWER supply.  Detachable power cable is a bonus to maximize the air flow inside the PC.  Make sure the power supply is delivered with the right type of power connector to drive you GPU.  All modern units of quality with 20 + 4 and 4 + 4 key cards.  If you do not plan to run graphic dual with a high range GPU, so it doesn't matter what quality 80 watter 380 power SUPPLY Antec, Corsair, Enermax and Seasonic PSU will be enough.  You will need to back up POWER supply to 450-550W, if you run two graphics cards high-end.

  A good 450W PSU is a good compromise because it is more effective when the PC is idle and has enough power to run two GPUS.  If you want to save $ on electricity, then get a smaller power supply (range 300-350W) because these units reach the level of efficiency of 80% around release of 65 to 70 watts.

• Replace the power supply for a Pavilion a140n

  How to install a new power supply in a HP Pavilion a140n? Is there a step by step guide?

  Zz30fg, welcome to the forum.

  Is the model you list correct?  I can't find anywhere.

  Before you start, I suggest that you measure existing power supply unit (PSU) to make sure that the one you choose to insert in the space provided.

  The first thing you will do is turn off the computer.  Disconnect all devices that are connected, for example, keyboard, mouse, printer, etc.  Once done, remove the side cover of the case.  There are two or more screws on the back of the computer that you have to remove.  Then slide the side gently to the rear.  Put it somewhere safe.   Be sure to touch the metal inside of the case before touching any components.  This will eliminate static electricity (ESD).  Now you can disconnect the cables from the PSU.  This is where it gets a little tricky.  I normally take a picture of the connections and mark them as clearly as possible on the motherboard.  Believe me, you'll be much happier if you do.  Once this operation is complete, it is time to remove the (4) screws that hold the power supply in place.  Hold it with care.  If it falls it can damage other components.

  The new power supply will be marked with the appropriate connector cables.  At this point, it's just the opposite of what you were doing to uninstall the existing PSU.  Install the power supply into the case.  Do not overtighten the screws.  Make sure that the cables are inside the case.  Once in place, carefully connect all cables to the appropriate connectors.

  If you have any other questions, I will watch this thread for you help.

  If your problem is solved, please click "accept as a Solution.

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Is there a way to change the returning to the previous lock screen "click on" sound?  In the last update, the sound has changed.

  In the last update, lock/nattering screen changed, is there a way to change the click / sound, so that it is similar to the sound of the previous version?

  # Which is integrated into the iOS and there is no user input that can change.

• Is there a way to change the color of a 5 c?

  Is there a way to change the color of a 5 c?

  N °

• Is there a way to change the camera settings if you do not see your own face?

  It may be a stupid and obvious question, but is there a way to change the settings of the camera on Skype, so you can see the other person and not yourself? He kills sort of the illusion of a conversation face to face when you have a clumsy mirror of yourself that you can not get rid of! I looked online for help with this and found nothing, and minimizes the cheat only I understand Skype altogether and end up with only a tiny picture of the other person. Looks like there must be a better way!

  Thank you!

  There is no option to remove the image of P - P yourself, but if you click on this image it will reduce to a small thumbnail image.

• Is there a way to change the font size in the comments to a readable/superior police box? I went into preferences and tried making it bigger, and it does not work. Thank you.

  Is there a way to change the font size in the comments to a readable/superior police box? I went to Keynote > Preferences > General and tried making it bigger, and it does not work. Keynote 6.6.1 thanks.

  The fonts themselves, or one of the font attributes cannot be changed; (size, color, tabs or alignment)

  Although it would be very helpful to change the font size, in normal circumstances, this should not be a problem; comments are designed as a personal note by the designer and should only ever be seen by them.

• Pavilion m9400t CTO: connection cable of the power supply to a Pavilion m9400t CTO

  I installed a replacement PSU which has more cables and a few different - no problem on the identification and plug 20 + 4, 4 + 4 on the MB.  Also, no problem connecting to the SATA cables for drives (HARD drive and two optical drives).  There is a PCI-E cable, which without doubt, I do not for my graphics card NVIDIA to address (original) does not have a connector to it.   But I am confused and I want to be sure, I'm not spoil, I have another cable with connector Molex 4, nowhere I see to connect.  Without doubt, it is for the power supply of the fans and other devices - my PC feeds its fans of the power supplied to the motherboard? Can I just ignore that cable operators, for now?

  Hello

  If you're implying that all your existing devices have power wires going to then simply ignore them the molex connector 4-pin.

• Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

  Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

  Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

  Again, you can always buy the power supply cord and if it does not return.

  THX

• Is there a way to change the default (shrink to fit) printing to a custom print size

  Original title; Print (shrink to fit) default question?

  Is there a way to change the default (shrink to fit) print at a size of print without having to manually change whenever you are going to print?

  Hello

  I suggest you to return the item and check if it helps:

  To set the properties of the printer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_printer_props.mspx?mfr=true

  To set the default values to print

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_document_defaults.mspx?mfr=true